Sennheiser EW100 system with a XL2 ? at DVinfo.net

Luc Saint-Elie · December 9th, 2006, 03:55 PM

Hello,

Is it possible to use a Sennheiser EW100 system with a XL2 ?

Here is the system :
http://www.flickr.com/photo_zoom.gne?id=59037844&size=o

The problem is the EW100 has a classical minijack and my XL2 uses 2 XLR (plus the two jacks connection for the provided front mic)

Thanks in advance

Luc

Alan James · December 9th, 2006, 04:56 PM

Yes it is. Just get an 1/8 inch to XLR adapter. Thats what we do where I work and it works just fine.

Luc Saint-Elie · December 9th, 2006, 09:19 PM

Quote:

Originally Posted by Alan James

Yes it is. Just get an 1/8 inch to XLR adapter. Thats what we do where I work and it works just fine.

Obviousely... I was stupid..

Thanks a lot, of course a 1/8->XLR is the obvious solution... I'm so used to my XLR microphones that I didn't even realize that :-)

Luc

Michael Nistler · December 10th, 2006, 11:08 AM

Hi Luc,

Based on some flack in another forum about the quality of certain transceivers, I recently decided to conduct some online tests of some of my Sennheiser EW100s. The tests use various microphone, distances, frequencies, and diversity/non-diversity antenna configurations. In all cases, I used the 1/8 inch male to XLR male that comes with most Sennheisers these days. If you're interested in listening to the test results, see:

http://www.bridgehands.com/audio

Warm Regards, Michael

December 9th, 2006, 03:55 PM	#1
Luc Saint-Elie New Boot Join Date: Jun 2005 Location: Paris-France Posts: 20	Sennheiser EW100 system with a XL2 ? Hello, Is it possible to use a Sennheiser EW100 system with a XL2 ? Here is the system : http://www.flickr.com/photo_zoom.gne?id=59037844&size=o The problem is the EW100 has a classical minijack and my XL2 uses 2 XLR (plus the two jacks connection for the provided front mic) Thanks in advance Luc

December 10th, 2006, 11:08 AM	#4
Michael Nistler Major Player Join Date: Aug 2006 Location: Petaluma, CA Posts: 456	Sennheiser EW100 Audio Test results Hi Luc, Based on some flack in another forum about the quality of certain transceivers, I recently decided to conduct some online tests of some of my Sennheiser EW100s. The tests use various microphone, distances, frequencies, and diversity/non-diversity antenna configurations. In all cases, I used the 1/8 inch male to XLR male that comes with most Sennheisers these days. If you're interested in listening to the test results, see: http://www.bridgehands.com/audio Warm Regards, Michael

December 9th, 2006, 04:56 PM	#2
Alan James Regular Crew Join Date: Jul 2006 Location: Tampa, Florida Posts: 261	Yes it is. Just get an 1/8 inch to XLR adapter. Thats what we do where I work and it works just fine.