|
|||||||||
|
Thread Tools | Search this Thread |
May 4th, 2007, 12:16 PM | #16 |
Regular Crew
Join Date: Jan 2007
Location: United Kingdom
Posts: 41
|
No seriously, the barest brush of the camcorder anywhere is picked up by the bloody thing it's infuriating!
Someone earlier suggested performing a 'low cut' in post production but I don't know how to do that. I'm sure I've got the tools, I have Adobe production studio with Audition etc... |
May 4th, 2007, 12:26 PM | #17 |
Regular Crew
Join Date: Sep 2006
Location: Oslo, Norway
Posts: 106
|
Simple. Apply a High Pass filter, and cut it at, say 100 Hz to remove any frequencies below 100 Hz. Other packages would call it a Low Cut filter - same thing.
__________________
"Those who dream by day are cognizant of many things which escape those who dream only by night." -- Edgar Allan Poe |
May 4th, 2007, 02:57 PM | #18 |
Major Player
Join Date: Jan 2007
Location: Tampa,Florida
Posts: 236
|
Also be aware that mic cables can transmit sound! Not all cables are created equal. Get a short one with a 90 degree connector at the mic end and soft flexible shielding. I swapped mine out years ago because it was tramsmitting to much sound to the mic even with a good shock mount.
|
| ||||||
|
|