brr..sound during manual focus at DVinfo.net

Raymond Toussaint · September 5th, 2007, 04:31 AM

I have a 'crunching' sound handling the manual focusring, looks like sand or dust IN the lens. I am very carefull with the cam and don't understand whats happening. Its now 10 months old. If I use the manual focus for a longer period, it seems to get a little softer (the sound: sggggrrrrr). It is also not on the whole turn, but on a part of it.

Using the autofocus you do not hear anything, I tried to blow a little and with a papercorner to 'free' dust but it wouldn't help.

What do you think, is this something for service within the warranty?

Bill Pryor · September 7th, 2007, 09:52 PM

I don't hear anything in my focusing. It might be a good idea to call the service place while it's still under warranty.

Don Palomaki · September 8th, 2007, 05:03 PM

Same as Bill...

Raymond Toussaint · September 9th, 2007, 09:52 AM

Thanks both! it is not only the sound it even goes a little harder at some point, something is wrong..I 'll contact the service.

Przemysław Pyrek · August 11th, 2008, 03:22 PM

Hi,
i just got back from short vactions and i discovered the same symptoms on my A1.
The focusing ring gives terrible crunching sounds, i didn't noticed it before.

I must say it's quiet dissapointing, the camera sounds as if i have took it to the desert to film sand storms, when acctually i was once in the forest and once riding a jeep, where i had it carefully covered with a shirt and every hole exept one sleve taped (i know it sounds bad, but it was done good).
But enough of this moaning...

If i send it to Canon service, does waranty cover cleaning this?

September 5th, 2007, 04:31 AM	#1
Raymond Toussaint Regular Crew Join Date: Nov 2005 Posts: 173	brr..sound during manual focus I have a 'crunching' sound handling the manual focusring, looks like sand or dust IN the lens. I am very carefull with the cam and don't understand whats happening. Its now 10 months old. If I use the manual focus for a longer period, it seems to get a little softer (the sound: sggggrrrrr). It is also not on the whole turn, but on a part of it. Using the autofocus you do not hear anything, I tried to blow a little and with a papercorner to 'free' dust but it wouldn't help. What do you think, is this something for service within the warranty?

September 8th, 2007, 05:03 PM	#3
Don Palomaki Wrangler Join Date: Sep 2001 Location: Northern VA Posts: 4,489	Same as Bill... __________________ dpalomaki@dspalomaki.com

September 7th, 2007, 09:52 PM	#2
Bill Pryor Contributor Join Date: Jan 2003 Location: Kansas City, MO Posts: 4,449	I don't hear anything in my focusing. It might be a good idea to call the service place while it's still under warranty.

September 9th, 2007, 09:52 AM	#4
Raymond Toussaint Regular Crew Join Date: Nov 2005 Posts: 173	Thanks both! it is not only the sound it even goes a little harder at some point, something is wrong..I 'll contact the service.

August 11th, 2008, 03:22 PM	#5
Przemysław Pyrek New Boot Join Date: Jun 2008 Location: Katowice Poland Posts: 11	Hi, i just got back from short vactions and i discovered the same symptoms on my A1. The focusing ring gives terrible crunching sounds, i didn't noticed it before. I must say it's quiet dissapointing, the camera sounds as if i have took it to the desert to film sand storms, when acctually i was once in the forest and once riding a jeep, where i had it carefully covered with a shirt and every hole exept one sleve taped (i know it sounds bad, but it was done good). But enough of this moaning... If i send it to Canon service, does waranty cover cleaning this?