|
|||||||||
|
Thread Tools | Search this Thread |
August 28th, 2007, 11:30 AM | #1 |
New Boot
Join Date: Aug 2007
Location: Agat Guam (USA)
Posts: 10
|
Azden WMSPRO & SGM2X
Is there a way to use both mic systems and the same time on the XHA1? I tried to but if I plugged in one of the mics, the other was rendered useless. Thanks for any assistance.
|
August 28th, 2007, 11:44 AM | #2 |
Obstreperous Rex
|
Here's what you're running into:
The Azden WMSPRO connects to the camcorder via the 1/8th inch mini-jack input. The SGM2X connects to the camcorder via one of the two XLR inputs. Those different inputs are an either-or situation. You can choose either XLR or the 1/8th-inch mini-jack, but not both. The workaround would be to get an adapter cable which converts the 1/8th-inch plug on the WMSPRO over to an XLR plug, that way you can connect both mics via the camcorder's two XLR inputs. Hope this helps, |
September 1st, 2007, 03:08 AM | #3 |
New Boot
Join Date: Aug 2007
Location: Agat Guam (USA)
Posts: 10
|
Thanks Chris. Now I have to find that adaptor, and hopefully is a small plug. Don't need all those wires on my camera.
|
| ||||||
|
|