can't get kona lh to 'see' HV10..? at DVinfo.net

Gary Barr · February 21st, 2007, 08:02 AM

Hi,
I think I've tried every possible config on the HV10 playout settings but my kona lh still says 'no video'. I'm going in component with some connecters (RCA-BNC male, and then a female BNC coupler to the kona BNC component inputs) Might these be the problem?

thanks.

Gary Barr · February 21st, 2007, 01:48 PM

is anyone using their HV10 and going into a Kona LH/e? would be grateful to know how they're doing it.

Lee Wilson · February 21st, 2007, 04:18 PM

Gary

I can't help you, but can I ask why you don't simply capture using firewire ?

Gary Barr · February 22nd, 2007, 08:46 AM

Hi Lee,

I want a workflow as similar to a DV one as possible in terms of time - so I want to bring in the HDV as DVCProHD for ease in post. I also needed the card for other analogue sources and for HD monitoring so I'm hoping to kill a few birds.

Jeff Krepner · February 23rd, 2007, 02:24 PM

Try connecting the camera to the monitor (using component) to see if you are getting a signal from the camera.

Yes. Then you know it's the board/software/cables/connectors/etc.

No. Then you know it's the camera or camera cable.

Gary Barr · February 25th, 2007, 12:29 PM

Hi,

No, the camera and cabling are all fine, I put them through my HD projector. Any other tips?

February 21st, 2007, 08:02 AM	#1
Gary Barr Regular Crew Join Date: Sep 2004 Location: United Kingdom Posts: 186	can't get kona lh to 'see' HV10..? Hi, I think I've tried every possible config on the HV10 playout settings but my kona lh still says 'no video'. I'm going in component with some connecters (RCA-BNC male, and then a female BNC coupler to the kona BNC component inputs) Might these be the problem? thanks.

February 21st, 2007, 01:48 PM	#2
Gary Barr Regular Crew Join Date: Sep 2004 Location: United Kingdom Posts: 186	is anyone using their HV10 and going into a Kona LH/e? would be grateful to know how they're doing it.

February 21st, 2007, 04:18 PM	#3
Lee Wilson Major Player Join Date: Sep 2006 Location: London UK Posts: 376	Gary I can't help you, but can I ask why you don't simply capture using firewire ?

February 22nd, 2007, 08:46 AM	#4
Gary Barr Regular Crew Join Date: Sep 2004 Location: United Kingdom Posts: 186	Hi Lee, I want a workflow as similar to a DV one as possible in terms of time - so I want to bring in the HDV as DVCProHD for ease in post. I also needed the card for other analogue sources and for HD monitoring so I'm hoping to kill a few birds.

February 23rd, 2007, 02:24 PM	#5
Jeff Krepner Regular Crew Join Date: Sep 2005 Location: Timonium, MD Posts: 142	Try connecting the camera to the monitor (using component) to see if you are getting a signal from the camera. Yes. Then you know it's the board/software/cables/connectors/etc. No. Then you know it's the camera or camera cable.

February 25th, 2007, 12:29 PM	#6
Gary Barr Regular Crew Join Date: Sep 2004 Location: United Kingdom Posts: 186	Hi, No, the camera and cabling are all fine, I put them through my HD projector. Any other tips?