|
|
|
|
|
|
|||||||||
 |
|
|
Thread Tools | Search this Thread |
February 23rd, 2013, 05:23 AM
|
#1 |
|
Regular Crew
Join Date: May 2006
Location: Summit, NJ
Posts: 169
|
HFG20 Part Number?
I own the G10 and I'd like to replace the lens shade with one like the G20's.
Does anyone know the part number to purchase the HF-G20 lens shade separately? I might be interested in an aftermarket lens shade, though, if you can recommend a similar one. |
|
|
|
February 23rd, 2013, 10:39 AM
|
#2 |
|
Regular Crew
Join Date: Oct 2007
Location: Harpers Ferry, WV USA
Posts: 164
|
Re: HFG20 Part Number?
Is the G20 shade functionally better? I have to replace a G10 one.
__________________
*** http://www.vimeo.com/chipgallo *** |
|
|
|
|
February 23rd, 2013, 02:42 PM
|
#3 |
|
Regular Crew
Join Date: May 2006
Location: Summit, NJ
Posts: 169
|
Re: HFG20 Part Number?
From what I could see in videos online, it seems to have a built in flag and/or lens cap.
Right now, with the factory lens shade, I'm covering the lens with a lens cap that goes on by squeezing the center. I have to use that cap because of the filters I've installed. The cap doesn't fit well and sometimes falls off so it's not so user friendly. A lens shade like the one on the G20 would be a huge improvement for me. |
|
|
|
|
February 24th, 2013, 07:51 AM
|
#4 |
|
Inner Circle
Join Date: Jun 2005
Location: Cincinnati, OH
Posts: 8,425
|
Re: HFG20 Part Number?
The G20 has not hit the streets yet. You probably cannot buy parts for a camera that hasn't yet been released.
You can check with B&H, call them and they'll tell you the scoop on it. |
|
|
|
|
February 25th, 2013, 02:33 PM
|
#5 |
|
Wrangler
Join Date: Sep 2001
Location: Northern VA
Posts: 4,489
|
Re: HFG20 Part Number?
Canon usually lists their phone number for support on back cover of the manual. You should be able to get parts information there once it is available.
__________________
dpalomaki@dspalomaki.com |
|
|
|
|
March 1st, 2013, 05:48 PM
|
#6 |
|
Regular Crew
Join Date: May 2006
Location: Summit, NJ
Posts: 169
|
Re: HFG20 Part Number?
I called Canon's parts department. They didn't find the HFG20 in their computer and only found the XA10 and the HFG10.
It looks like it's going to be a few months before that part can be ordered. |
|
|
|
|
March 4th, 2013, 06:52 AM
|
#7 |
|
Wrangler
Join Date: Sep 2001
Location: Northern VA
Posts: 4,489
|
Re: HFG20 Part Number?
Still shows up as in "pre-order" status at B&H.
The January press release said February availability. I suspect it will be a bit longer for common availability.
__________________
dpalomaki@dspalomaki.com |
|
|
|
|
June 26th, 2013, 09:38 PM
|
#8 |
|
Regular Crew
Join Date: May 2006
Location: Summit, NJ
Posts: 169
|
Re: HFG20 Part Number?
Would anyone like to add any updates they might have? I have not called Canon to inquire again about this part.
|
|
|
|
|
June 27th, 2013, 10:40 AM
|
#9 |
|
Regular Crew
Join Date: Nov 2008
Location: Maidstone, Kent, UK
Posts: 190
|
Re: HFG20 Part Number?
From a comment on my YouTube channel:
"The part number for the lenshood is D52-0380-000. I bought it from Convena. It costs 30€. The hood fpr HF G10 is D52-0370-000 and costs 9€. They are interchangable." Hope that helps, Dave
__________________
www.tubeshooter.co.uk www.youtube.com/ukairscape and www.youtube.com/tubeshootermag |
|
|
|
|
June 28th, 2013, 11:07 PM
|
#10 |
|
Regular Crew
Join Date: May 2006
Location: Summit, NJ
Posts: 169
|
Re: HFG20 Part Number?
Thanks....
|
|
|
|
|
July 7th, 2013, 03:54 PM
|
#11 |
|
New Boot
Join Date: Jun 2013
Location: Tallahassee Florida
Posts: 20
|
Re: HFG20 Part Number?
I am in the U.S. and Convena doesn't seem to have a ship to U.S. ability. I tried to order, but there is no United States, America, or U.S.A. listed under the country selection. ????
I emailed Canon, and they said to call the Canon service parts number. Anyone in the States ordered this part successfully yet? |
|
|
|
|
| ||||||
|
||||||
|
|
