|
|||||||||
![]() |
|
Thread Tools | Search this Thread |
![]() |
#1 |
Regular Crew
Join Date: May 2003
Location: Corona, CA
Posts: 37
|
GL2 Playbackon ZR10
I would prefer using my old Canon ZR-10 to playback GL2 footage to my computer. I would rather the ZR-10 take the stop and go wear and tear of video capturing and save the GL2 for recording only.
Assuming the heads are clean on the ZR-10, will there be any loss of picture quality on my final production? In other words, are the heads on the GL2 any different than the heads on a ZR-10? Thanks, Alex |
![]() |
![]() |
![]() |
#2 |
Regular Crew
Join Date: Jan 2003
Location: Palm Springs, CA
Posts: 86
|
If you will be catpuring via Firewire, there will be no Loss of Quality, It is a digital signal, from the most expensive cam, to the cheapest miniDV cam... a digital signal, is a digital signal. No change.
I use a Sony TRV-17 for my playback deck. No problems Thanx, |
![]() |
![]() |
![]() |
#3 |
Regular Crew
Join Date: May 2003
Location: Corona, CA
Posts: 37
|
Thanks.
This forum is F***ing awesome! |
![]() |
![]() |
![]() |
#4 |
New Boot
Join Date: May 2004
Location: San Francisco, CA
Posts: 10
|
Thanks for answering the same question
I agree. This is one of the most useful sites I have found. I had the same question as the previous posting, and the answer was exactly what I needed.
|
![]() |
![]() |
![]() |
#5 |
Regular Crew
Join Date: Oct 2003
Location: Hollywood, CA
Posts: 128
|
yep. DVi rocks! :)
|
![]() |
![]() |
![]() |
| ||||||
|
|