|
|
|
|
|
|
|||||||||
 |
|
|
Thread Tools | Search this Thread |
February 28th, 2020, 04:31 AM
|
#1 |
|
New Boot
Join Date: Jul 2012
Location: UK
Posts: 5
|
C100/Ninja 2 ...
Hi all,
My trusty C100 will no longer connect to my Ninja 2. I tried with a mate’s C100 with the same result. I changed the HDMI cables 3 times. Same result. The Ninja 2 continued to claim that there was ‘No Signal’. Strange, it was working last week and no menu changes have been made at all. I plugged the C100 into an external monitor and then a smart TV - all was well. A good, clean picture, the HDMI connections were all snug and jiggling them did not reveal any loose connections or result in any picture breakup. I then plugged my 5DMK4 into the Ninja 2 and the video image appeared immediately. Again, a good, clear picture and no issues when the HDMI connectors were jiggled about. We tried a second DSLR and that worked well too. So, the Ninja 2 has refused to work with 2 different C100 cameras but works quite happily with a Canon 5DMK4. Any ideas would be very welcome. Cheers! _________________________________________ C100 menu settings: OTHER FUNCTIONS > HDMI – TIME CODE > ON REC COMMAND > ON VIDEO SETUP > CHARACTER DISPLAY > EXT OUT HD ONSCREEN DISPLAY > ON |
|
|
|
| ||||||
|
||||||
|
|
