Calibrating C300 Monitor to TVlogic

[Roger Pinto]

What would be the steps to match (as close as possible) for production work - C300's Monitor to output on TVlogic5.6 and an Alphatron EVF. Since C300 Monitor has no means to calibrate one needs to match the TVlogic & Alphatron to that.

[John Gardiner]

Send out color bars from the camera and calibrate each monitor separately using brightness and contrast settings so the color bars are looking correct. If you don't have the manuals you should be able to find calibration instructions online.

The TV Logics always look misleadingly good. I don't trust their color.

[Roger Pinto]

Originally Posted by John Gardiner

Send out color bars from the camera and calibrate each monitor separately using brightness and contrast settings so the color bars are looking correct. If you don't have the manuals you should be able to find calibration instructions online.

The TV Logics always look misleadingly good. I don't trust their color.

Color calibration is more than just playing with Brightness & Contrast. One also needs to check thru Blue Only modes etc, I desired to know more on subject so as to bring TVlogic as close as possible to LCD of C300 for field use. Of cource it wont be replacing a field production monitor but yes the better matching is best !