Finally we did it...

Dan Diaconu · May 24th, 2005, 04:26 PM

I do not know either the specific design of G35. If the end result (HD tape? DVD?) can be displayed on a big screen (27"-50") and; while shooting a sharp CU with some lights (soft) in the BG, try and pan/tilt just a bit (hardly moving the camera) and look for grain/pattern. If it shows (on the soft lights in the BG) well.... then you know. If it doesn't is good. BTW, the lights should be a bit underexposed. (obviously if they bloom, not much to see) camera lens 1.4/50 and focus set at close, lights in the BG 20-60 ft away...
Static :
http://dandiaconu.com/gallery/album05/IMGA0163
Motion:
http://dandiaconu.com/gallery/album05/IMGA0164

(well...you get the idea) (The "grain" from the motion pic, may be grain or noise; the still was taken with a 28-200 lens at 5.6 aperture, that being the max aperture on that lens... back then in Jan or so)

On a general note, if one that makes this contraptions does not "look for trouble" somebody else will and than is worse.(just my POV)
Bottom line is what one is prepared to put up with and pay for...... (I guess)

Kyle Edwards · May 24th, 2005, 08:29 PM

incorrect links.

Dan Diaconu · May 24th, 2005, 09:33 PM

Thank you... try them now.

Kyle Edwards · May 24th, 2005, 09:50 PM

perfect, thank you.

Daves Spi · May 25th, 2005, 01:14 AM

Its just wednesday and I can not wait anymore to see the weekend... Im full o ideas, we are preparing brand new oscilating mechanism (based on someONEs kick ;-)) I have to try the night shot too... Never thought it can be done !

Dan: how did you make the screen on beattie from corner to corner ? I've tried set up camera closer and farther, I found the longer distance the better image is. But If I zoom on it, its getting worse again. If I get everything right, you are using just primary lens, GG (beattie) and camera. No macros, no condensers...

About the G35 i have not seen any quality footage or screenshot. So I do not know either. But micro35 seems soft to me...

Dan Diaconu · May 25th, 2005, 08:26 AM

Daves, derz a sweet spot somewhere along the zoom lens (but you have to find it cuz I do not know your camera) and check you mail more often.

Daves Spi · May 25th, 2005, 08:35 AM

Quote:

Originally Posted by Dan Diaconu

check you mail more often.

Damn, damn, damn !!!

Im checking my mail everyday... but... Im getting tons of spam, so I usually take all 100 english written messages and drop it every day... Appologies, but your was probably one of them... Can you PLEASE (please excuse...) resend me all you posted to me ??? So sorry, so angry to myself... pitty spam...

:'-(

Dan Diaconu · May 25th, 2005, 08:49 AM

The email I send does not show here, so... it may be my fault.
Get the camera close to GG and then zoom-in (a bit)
Anyway... my son will be there (Prague) in a day or two singing at the cathedral... if you have a few hours, maybe you stop on by and give him a short city tour (if you can) His name is Andrei. If you can, I'll pass you the day, hour and place where they'll be.

Daves Spi · May 25th, 2005, 08:59 AM

Quote:

Originally Posted by Dan Diaconu

If you can, I'll pass you the day, hour and place where they'll be.

No problem, lets discuss it offline, by email... I'll pay attention this time ! ;-)

Dan Diaconu · May 25th, 2005, 09:06 AM

Looks like my emails take a "de-tour" to reach destination... I have registered on your site and sent you a message. I am not sure though for is all in Czech....
How do I get to send a message on your site (like we do it here)?

Dan Diaconu · May 25th, 2005, 09:07 AM

Looks like my emails take a "de-tour" to reach destination... I have registered on your site and sent you a message. I am not sure though for is all in Czech....How do I get to send a message on your site (like we do it here)?

Daves Spi · May 25th, 2005, 09:26 AM

Quote:

Originally Posted by Dan Diaconu

Looks like my emails take a "de-tour" to reach destination... I have registered on your site and sent you a message. I am not sure though for is all in Czech....How do I get to send a message on your site (like we do it here)?

Yeah, I saw it... And I got the message, I reply to you :) Just login again and read... In right column you will see "NEW MESSAGE". Missing time to translate all to English, but would like...

Jonathan Houser · May 25th, 2005, 09:55 AM

Quote:

Originally Posted by Daves Spi

About the G35 i have not seen any quality footage or screenshot. So I do not know either. But micro35 seems soft to me...

Here you go!
www.guerilla35.com/newdemo.html
www.guerilla35.com/XL2.html
www.guerilla35.com/UncleJeff.html
www.guerilla35.com/Z1.html

If you are still interested i can give you links to some MPEG2 footage.

Jonathan Houser
www.guerilla35.com

Daves Spi · May 25th, 2005, 03:15 PM

http://web.datriware.com/gfx_photos/articles/p1057.jpg

Oscar Spierenburg · May 25th, 2005, 05:53 PM

I'm sure Jonathan won't tell us, although this board is 99% about sharing ideas, what do we think about those beautiful g35 images...is it wax? I hope so.
Daves, was that image with the enlargements you posted with an oscillating GG?

May 24th, 2005, 04:26 PM	#46
Dan Diaconu Major Player Join Date: Dec 2004 Location: Vancouver, Canada Posts: 804	I do not know either the specific design of G35. If the end result (HD tape? DVD?) can be displayed on a big screen (27"-50") and; while shooting a sharp CU with some lights (soft) in the BG, try and pan/tilt just a bit (hardly moving the camera) and look for grain/pattern. If it shows (on the soft lights in the BG) well.... then you know. If it doesn't is good. BTW, the lights should be a bit underexposed. (obviously if they bloom, not much to see) camera lens 1.4/50 and focus set at close, lights in the BG 20-60 ft away... Static : http://dandiaconu.com/gallery/album05/IMGA0163 Motion: http://dandiaconu.com/gallery/album05/IMGA0164 (well...you get the idea) (The "grain" from the motion pic, may be grain or noise; the still was taken with a 28-200 lens at 5.6 aperture, that being the max aperture on that lens... back then in Jan or so) On a general note, if one that makes this contraptions does not "look for trouble" somebody else will and than is worse.(just my POV) Bottom line is what one is prepared to put up with and pay for...... (I guess) Last edited by Dan Diaconu; May 24th, 2005 at 09:33 PM.

May 25th, 2005, 01:14 AM	#50
Daves Spi Regular Crew Join Date: Feb 2005 Location: Czech republic, Prague Posts: 159	Its just wednesday and I can not wait anymore to see the weekend... Im full o ideas, we are preparing brand new oscilating mechanism (based on someONEs kick ;-)) I have to try the night shot too... Never thought it can be done ! Dan: how did you make the screen on beattie from corner to corner ? I've tried set up camera closer and farther, I found the longer distance the better image is. But If I zoom on it, its getting worse again. If I get everything right, you are using just primary lens, GG (beattie) and camera. No macros, no condensers... About the G35 i have not seen any quality footage or screenshot. So I do not know either. But micro35 seems soft to me... __________________ Daves At the beginning there was an idea, then the ambition came and the idea became to be a dream... The Satisfied Dream => http://film.datriware.com

May 25th, 2005, 03:15 PM	#59
Daves Spi Regular Crew Join Date: Feb 2005 Location: Czech republic, Prague Posts: 159	http://web.datriware.com/gfx_photos/articles/p1057.jpg __________________ Daves At the beginning there was an idea, then the ambition came and the idea became to be a dream... The Satisfied Dream => http://film.datriware.com

May 24th, 2005, 08:29 PM	#47
Kyle Edwards Major Player Join Date: Nov 2004 Location: LI, NY Posts: 274	incorrect links.

May 24th, 2005, 09:33 PM	#48
Dan Diaconu Major Player Join Date: Dec 2004 Location: Vancouver, Canada Posts: 804	Thank you... try them now.

May 24th, 2005, 09:50 PM	#49
Kyle Edwards Major Player Join Date: Nov 2004 Location: LI, NY Posts: 274	perfect, thank you.

May 25th, 2005, 08:26 AM	#51
Dan Diaconu Major Player Join Date: Dec 2004 Location: Vancouver, Canada Posts: 804	Daves, derz a sweet spot somewhere along the zoom lens (but you have to find it cuz I do not know your camera) and check you mail more often.

May 25th, 2005, 08:49 AM	#53
Dan Diaconu Major Player Join Date: Dec 2004 Location: Vancouver, Canada Posts: 804	The email I send does not show here, so... it may be my fault. Get the camera close to GG and then zoom-in (a bit) Anyway... my son will be there (Prague) in a day or two singing at the cathedral... if you have a few hours, maybe you stop on by and give him a short city tour (if you can) His name is Andrei. If you can, I'll pass you the day, hour and place where they'll be.

May 25th, 2005, 09:06 AM	#55
Dan Diaconu Major Player Join Date: Dec 2004 Location: Vancouver, Canada Posts: 804	Looks like my emails take a "de-tour" to reach destination... I have registered on your site and sent you a message. I am not sure though for is all in Czech.... How do I get to send a message on your site (like we do it here)?

May 25th, 2005, 09:07 AM	#56
Dan Diaconu Major Player Join Date: Dec 2004 Location: Vancouver, Canada Posts: 804	Looks like my emails take a "de-tour" to reach destination... I have registered on your site and sent you a message. I am not sure though for is all in Czech....How do I get to send a message on your site (like we do it here)?

May 25th, 2005, 05:53 PM	#60
Oscar Spierenburg Major Player Join Date: Jan 2005 Location: (The Netherlands - Belgium) Posts: 735	I'm sure Jonathan won't tell us, although this board is 99% about sharing ideas, what do we think about those beautiful g35 images...is it wax? I hope so. Daves, was that image with the enlargements you posted with an oscillating GG?