UCR 100 wiring for connection to mixer at DVinfo.net

Bernie Beaudry · July 17th, 2010, 03:35 PM

Any Lectro UCR 100 users in the group? I'm rewiring four receiver to mixer cables to use with a Sound Devices 442. I want to make sure I'm doing it the best way. Need to finish up this weekend. Your help is appreciated!
Bernie

Rick Reineke · July 17th, 2010, 06:32 PM

Mini-plug tip> XLR (M) pin-2
Mini-plug sleeve> XLR pin-1
Jump XLR pin-3 to pin-1

If using a TRS mini-plug, tie the ring and shield together. DO NOT wire it in a conventional TRS to XLR configuration.
The output jack is unbalanced, however it will pass the same signal to tip & ring of 'stereo' headphones.

July 17th, 2010, 03:35 PM	#1
Bernie Beaudry Regular Crew Join Date: Oct 2007 Location: St. Paul, Minnesota Posts: 166	UCR 100 wiring for connection to mixer Any Lectro UCR 100 users in the group? I'm rewiring four receiver to mixer cables to use with a Sound Devices 442. I want to make sure I'm doing it the best way. Need to finish up this weekend. Your help is appreciated! Bernie

July 17th, 2010, 06:32 PM	#2
Rick Reineke Inner Circle Join Date: Aug 2008 Location: New York Posts: 2,039	Mini-plug tip> XLR (M) pin-2 Mini-plug sleeve> XLR pin-1 Jump XLR pin-3 to pin-1 If using a TRS mini-plug, tie the ring and shield together. DO NOT wire it in a conventional TRS to XLR configuration. The output jack is unbalanced, however it will pass the same signal to tip & ring of 'stereo' headphones. Last edited by Rick Reineke; July 17th, 2010 at 07:17 PM. Reason: addendum