|
|
|
|
|
|
|||||||||
 |
|
|
Thread Tools | Search this Thread |
December 7th, 2010, 10:54 PM
|
#1 |
|
Tourist
Join Date: Dec 2009
Location: Canada
Posts: 1
|
Ki pro to multiple monitors
Does anyone know if it is possible to run a HD signal from a single Ki pro to two separate monitors, one through HDMI and one through Component?
|
|
|
|
December 8th, 2010, 11:06 AM
|
#2 |
|
AJA
Join Date: Apr 2009
Location: Grass Valley, CA
Posts: 252
|
Mike B. - The HDMI output, the component output and the SDI output are all active at the same time. Yes, you could monitor via HDMI and component at the same time.
Hope this is helpful, Jon Thorn Product Manager AJA Video Systems, Inc. |
|
|
|
|
December 8th, 2010, 03:16 PM
|
#3 |
|
Inner Circle
Join Date: Dec 2005
Location: Rhode Island
Posts: 4,048
|
Or if you wanted to only use HD-SDI could go to one monitor. And then from that monitor to the next, and the next? I have done this with two Marshal monitors.
Jon can we expect delivery to Abel in NYC soon? |
|
|
|
|
December 9th, 2010, 11:25 AM
|
#4 |
|
AJA
Join Date: Apr 2009
Location: Grass Valley, CA
Posts: 252
|
Paul C. - Yes, one of the nice things about SDI signals (and using monitors like the Marshall units with SDI input/output) is that passing signal from one device to another is pretty straightforward and easy.
I do not have a firm shipping date for Ki Pro Mini yet. Regards, Jon Thorn Product Manager AJA Video Systems, Inc. |
|
|
|
|
December 9th, 2010, 12:12 PM
|
#5 |
|
Inner Circle
Join Date: Dec 2005
Location: Rhode Island
Posts: 4,048
|
Agree Jon it is easy and one of the many reasons I buy the Marshal monitors.
Well I am pre-ordered at Abel so just looking at timing. |
|
|
|
|
| ||||||
|
||||||
|
|
