Re: New Firmware Updates and New "EI S-Log"
 

Yes, I probably could have phrased it better. Sorry. It just sounded like you don't like S-Log with a LUT. But perhaps you're still evaluating because of the lack of Mac software.

Re: New Firmware Updates and New "EI S-Log"
 

Any word on when in November this new firmware will be released?

Re: New Firmware Updates and New "EI S-Log"
 

I'll be speaking with my Sony contacts this week. Last they told me was: "Very very soon"

Re: New Firmware Updates and New "EI S-Log"
 

Pardon me if this was answered already in earlier pages, but in Version 1.3 will the image with the LUT applied also be outputted through the HDMI out if that was chosen instead of SDI for the regular output.
That would be important for those of us owning or contemplating buying an HDMI EVF.
Thanks

Re: New Firmware Updates and New "EI S-Log"
 

Hard to say until it is actually available, but as of right now, there is no HDMI output at all when S-LOG is turned on.

Re: New Firmware Updates and New "EI S-Log"
 

Can't wait to see comparisons of our pimped up F3's to the Canon C300, especially after EI S-Log enabled. Gonna to be a heated battle and indeed interesting times for all.

Re: New Firmware Updates and New "EI S-Log"
 

In terms of real world shooting, the extra resolution of the C300 *might* be noticeable (its only ~150 more lines of res); however, the C300 cannot come close to the current 13.5 stops of DR of the F3 + S-Log and 14 stops of DR with EI S-Log. The C300 is limited by its 8 bit codec so squeezing more than 11 stops of DR would cause problems in post. Alister has written extensively about the problem of combining 11+ stops of DR with an 8 bit codec (thanks to Alister - I have learned more from you about signal processing than anyone else :)

Moreover, using a flat gamma, such as Canon's log, with an 8 bit codec can cause even more problems IF it lifts shadows and compresses highlights too much. I haven't seen Canon's log gamma; so, I don't know how it looks. The smart guys over at FXPHD/FXGUIDE.com have taught and discussed the Canon DSLRs extensively, and they were one of the first to show concern over the Technicolor profile because it compressed the image too much for an 8 bit codec.

However, I wonder if Canon will state that their Log gamma is to be used only for recording via SDI. Although, I vaguely recall reading that Canon is touting their log gamma as not needing anything extra like the Sony S-Log; so, I presume they designed the log gamma for internal recording.

UPDATE: I just read that the C300 is *only* 8 bit via SDI. Sorry, but $20k for an 8bit camera is absolute nonsense in 2011/12.

When are Canon and Sony going to realize that Red is the only company providing customers with all of the necessary features we actually WANT such as internal 10-12 bit recording. (although, you must spend another $10k for the SSDs) If the Scarlet can come close to the low noise of the F3 AND the claimed 13.5 stops of DR, the F3 + S-Log + external recorder is not looking so great. Most people don't need RAW or 4k capture (people, STOP SAYING 4k RESOLUTION when it refers ONLY to the # of pixels), but having an internal 10 bit recording would be hugely popular. Sony really needs to make the F3 with S-Log and SR1 built into the body. They could provide the HDCAM-SR Lite for free and unlock the 440 & 880MB/s HDCAM SR via a paid upgrade key. With a 220Mb/s, 10bit AVC codec, the HDCAM Lite is better than Pro Res HQ.

Re: New Firmware Updates and New "EI S-Log"
 

8 bit through SDI kills the C300.

We'll have to see when the Scarlet is in people's hands, but it remains to be seen how many people will accept its compromises.

As you point out 4k acquisition is ~3.6k resolution. What will most people do with that? Down rez it to 2k?

Variable frame rates, but at the expense of sensor cropping, which will affect FOV, surface area of the sensor for loss of light sensitivity, and in effect make your lenses tele's.

Whereas the F3 stays at S35. If you really need 4k I think most people will rent a Red One.

It will be interesting when there is actually use and comparisons going on.

Re: New Firmware Updates and New "EI S-Log"
 

Actually, 4k acquisition equals far less resolution, about 2400-2600 TVL due to being a Bayer sensor.

Re: New Firmware Updates and New "EI S-Log"
 

I have my hands on the latest firmware, EI mode and all. Looks like EI adjusts the LUT applied to the different outputs, but the S-Log output always remains the same. This makes sense when we think of Exposure Index as being just like a post push. I'll test the actual dynamic range tomorrow. Should be interesting.

Andy

Re: New Firmware Updates and New "EI S-Log"
 

Uhg. The Red approach. I was hoping this is what EI mode *wasn't*.

I've been shooting S-log to SxS with great success, at 0, 6, 12, and 18. This is going to compromise that now. Also it's going to mean you need multiple S-Log LUTs in color correction, one for each ASA. But with no metadata to tell the colorist which he should use? The Red way works because the ISO metadata travels in the R3D.

If this is all the case, I hope EI mode I can turn off and go back to the current S-Log method with 1.1?

Re: New Firmware Updates and New "EI S-Log"
 

You can switch EI mode on/off

Ned

Re: New Firmware Updates and New "EI S-Log"
 

And you can still add in camera gain to EI S-log using the gain switch. The base ISO is reduced to 400/800 as opposed to the current 800/1600, but you can still use the gain switch to increase the S-Log ISO even with EI S-Log enabled, so you have the best of both worlds. Add gain direct to the S-Log or just to the LUT output.

Re: New Firmware Updates and New "EI S-Log"
 

Whew.

:-)

Thanks for that very important info.

Re: New Firmware Updates and New "EI S-Log"
 

Alister

That's odd, the firmware I have doesn't seem to work that way. I'll do some more testing. When EI mode is on the gain switch does nothing.

Andy