The Røde nt4
 

I use the Røde Nt4 for concerts on the ex1 (with a shockmount) it is an instant XY. Goes for cheap online (Like $450) and sounds wonderful. Really captures the room and the music.

It can really handle the high Db/spl of a music venue without distortion. The capsules sound AMAZING and it can run off of an internal 9V battery or +48.

My .02
-Josh

Ok.
 

I'll concede that the ability of the EX1 to record uncompressed PCM (16 bits) is a a good reason to re-think the sound you capture. Aside from that, get the best one you can for the job in hand. Schoeps would be my choice, followed by Sanken. I think the original poster went for a Neumann mic which is anything but compact. Perhaps balance was not his concern.

We did another test yesterday down at the broadcast supply house I deal with and the Senn ME66 exhibited the exact same symptoms as my Audio Technica mic, so it's a camera issue and not a mic issue. Their suggestion is to advise Sony and take it in for testing and repair.

- Don

How are you all mounting them
 

Is anyone putting these mics into the on-camera mic mount? I saw one picture of someone who removed the camera mount and bolted on their own shock mount. Are you mounting them on the top? I guess some fit the camera mount and some don't. Any comments?

My supplier recommended a Sennheiser K6/ME66. I'm more than happy with the sound quality but initially it arrived without any kind of PMW-EX1 adapter and was so loose it was unusable on the camera. They then supplied a plastic ring that goes between the mic and the Sony mount and makes it rock solid when camera mounted.

However with the wind shield on I've got caught out several times when using the PMW-EX1 at its wider settings - the wind shield shows up in the top right hand corner of the frame. The whole thing feels like one heck of a kludge to be honest.

I'm using this on my EX.

The picture entitled "ksm3.jpg" is the model I actually have. The picture "kbwc8.jpg" shows the screw on adapter that mounts in the stock camera mic holder, which I'm also using.

http://www.mklemme.com/

- Don

The standard mic mount breaks way too easy.
I've made my own:
http://www.dvinfo.net/conf/showpost....80&postcount=6

When I get some time I'm making a number of the brackets and I'll get them black anodised.