DV Info Net - Private Classifieds listings from 2014

DV Info Net (https://www.dvinfo.net/forum/)

- Private Classifieds (https://www.dvinfo.net/forum/private-classifieds/)

- - Private Classifieds listings from 2014 (https://www.dvinfo.net/forum/private-classifieds/518255-private-classifieds-listings-2014-a.html)

Canon 24-105 F4 L Lens

I'm selling my Canon 24-105 F4 L lens that comes with the original box. It is in pristine condition and has only been used on 4 shoots (always had a UV filter on it).

Paypal only, asking $645 + $15 shipping.

I will only ship to verified addresses and will provide tracking + insurance.

Re: Canon 24-105 F4 L Lens

That's a great price for an excellent lens -- retail is up around ~$900. I love mine. Hope somebody jumps on this one quick.

Re: Sachtler Hot Pod Tripod Aluminium 100mm

It is missing the latch for the hook that keeps the column down. I never use that latch since it seems redundant & never had a problem with the regular "lock" lever.

(The hole for the screw driver is actually 180 degrees on the other side of the head / bowl / unit. Right where the bowl locking level is. I didn't get a photo of it, but can if needed.)

It is also missing the hook at the took for attaching a strap. (Also something I've never used.)

Last "issue" is two of the legs have that "tab" broken off. I find this makes it a little easier to move an individual leg up or down, but with the tab broken you just have to "grab" the leg instead of just pushing the tab. But since the legs fall freely both up & down, I haven't felt this gets in the way of normal function.

So very well beat up & well used, but everything functions 100%. These things are tanks.

----

If interested I'll lower my asking prince to $500, but very open to offers as I'd like to move this along quickly.

Re: Sachtler Hot Pod Tripod Aluminium 100mm

Thanks Zach,
I already own one and love it . Don't know why you would want to sell it frankly. Its incredibly fast to use on a shoot.
I was just curious about what looked like something was broken. If you had the one with the button instead of the screwdriver I might go for that since I switch my head on and off it often and the screwdriver is a PITA.
Its a steal for $500, though I got mine incredibly cheap as well.

BTW - You should post what's wrong with upfront. I would be very PO'd to discover those issues after buying.

Re: Sony PMW-F3 KIT, Alphatron, S-Log, etc... $8500

Indicam Surfer (Camera Stabilizer)

I'm selling my Indicam Surfer

This is what I am selling:

Indicam Surfer with 214 Arm
Indicam Surfer Sled
Backpack Vest
Discreet Vest
Stabilizer Basics DVD

This retails new at $2,475 before shipping.
Item is in good condition and show some signs of wear.

Anyone interested can contact me at: web<at>reelinspirations.com

I can email photos to those interested.

You can see all the details here: Indicam - Indicam

Asking $1,650 shipped via FedEx Ground.
Or, make me an offer.

Redrock Micro Deluxe microMatteBox with Case

I'm selling my Redrock Micro Deluxe microMatteBox with custom fitted pelican case.

This unit has been hardly used.

Retails new for $1,240

Check out the details here: microMatteBox | Professional Matte Box | 2 Stage | Swing Away

I can send photos to those interested.

Asking $850 shipped FedEx Ground USA
Or make me an offer.

Anyone interested can contact me at: web<at>reelinspirations.com

Porta Brace CS-DV3U Mini-DV Camera Case

Have a like new Porta Brace CS-DV3U Mini-DV Camera Case, bought it about 6 months ago carried it to a couple of jobs and then went back to stack able hard cases.

Just like the one seen here not a scratch or mark on it.

$100.00 shipped CONUS

http://www.bhphotovideo.com/c/product/375658-REG/Porta_Brace_CS_DV3U_CS_DV3U_Mini_DV_Camera_Case.html

Canon 60D, 50mm 1.4

Upgrading to a Canon 6D, so I need to get rid of this camera (and the lens) to put towards getting my new one. Am at work right now so don't have photos of body and lens, but will post when I get home.

Camera Model: Canon 60D
Lens Model: Canon 50mm 1.4

Camera Condition: 9/10
Lens Body Condition: 8/10 (just a little dirty)
Lens Glass Condition: 10/10 (haven't ever had any issues)

Camera Body Price: $550
Lens Price: $300
Package Price: $800 (shipped, PayPal gift, or Chase Quickpay, +3% if non-gift PayPal)

Sale Includes: All original packaging/accessories (including box).

Shipping Available: US

Location: Orlando, Florida (happy to sell to local)

Best Contact: PM

Feedback: Have sold and purchased many items here as well as on dvxuser.com and photography-on-the.net -- can look up my history, I believe.

Re: Sachtler Hot Pod Tripod Aluminium 100mm

Quote:

BTW - You should post what's wrong with upfront. I would be very PO'd to discover those issues after buying.

I agree. Someone PM'ed me & requested photos, so I was trying to get them up as quickly as possible & with as much detail as possible in the photos. I didn't have time to give details when I added the photos (it was late & I wanted sleep), but I wouldn't complete a transaction w/o flagging those bits.

Note: any interested buyers, I think I have the part to replace the column latch. Also I think the tripod hook you might be able to just get something from the hardware store. I just have found those bits as unnecessary, so didn't bother to replace.

Re: Quick Release V Mount Wedge - VCT-14 Style / Shoulder Mount Betacam

$25 each / $40 for the pair + S&H

Re: GoPro Wi-Fi Remote

Canon 60D Camera Body + All Original Accessories and Packaging

Hi,

I'm selling my Canon 60D camera body. I purchased it 01/01/2012. There are only 2,784 shutter actuations on the camera. The camera has seen very little use and is in great cosmetic and operational condition. The LCD is also in great shape. All of the original accessories and packaging are also included in the sale.

Included in sale:
Canon 60D Camera Body
Eyecup
Shoulder Strap (not pictured)
USB Cable (not pictured)
Stereo AV Cable (not pictured)
LP-E6 Battery (not pictured)
LC-E6 Battery Charger (not pictured)
User Manuals/Disc/USA Warranty Card (not pictured)
Original Box and Packaging

I'm looking to get $490.00. I will cover the shipping and paypal fees. I will only ship this item within the USA. Please PM or email me at: hammerhorror AT sbcglobal DOT net

Photos:
http://i6.photobucket.com/albums/y20...ps94a2acab.jpg

http://i6.photobucket.com/albums/y20...ps56fb5323.jpg

http://i6.photobucket.com/albums/y20...ps742334d9.jpg

http://i6.photobucket.com/albums/y20...ps1c0f18c2.jpg

http://i6.photobucket.com/albums/y20...ps05240faf.jpg

Re: Canon 60D Camera Body + All Original Accessories and Packaging

The Canon 60D has been sold. Thanks!

Zacuto Z-Finder Pro 2.5x for 3.2" Screens

WTS a like new Zacuto Z-Finder Pro 2.5x for 3.2" Screens. Comes with all original accesories, box and paperwork. $200. shipped CONUS. Just like the one in the link below

http://www.bhphotovideo.com/c/product/867051-REG/Zacuto_Z_FIND_PRO232_Z_Finder_Pro_2_5x_for.html
http://i80.photobucket.com/albums/j1...pst9yr1b2y.jpg

VINTEN PRO 5
525 LEGS
ARM
PADDED BAG
EXCELLENT ORDER

280 uk pounds

Canon 5d Mark 2, with accessories

We're selling one or both of our Canon 5d Mark 2s, each has an off-brand battery grip, battery charger, batteries. One has a shutter count of just under 25,000, the 2nd has about 75,000 (was very recently cleaned by Canon).

Both in great shape, with no physical blemishes, though one is missing that plastic thing that is usually around the loupe. One has a strap, the other doesn't. Both have Magic Lantern installed.

$1300 each, with two cards, two batteries, and the grip,
or $2500 for both, with grips, batteries, and a total of 6 CF cards (transcend 32gb).

call 218-275-2789
email Robert@RNBweddings.com

Pro Heavy Duty Jib System - Complete

Professional Heavy Duty Film/ Video Jib System – Complete

NZ $4,780 plus shipping at cost.

(or collect from Dunedin)

The system includes the following components:

1. Manfrotto 114 Heavy Duty Dolly
2. Manfrotto 528 XB Heavy Duty Tripod
3. B. Hague K12 Jib and accessories
4. B. Hague Underslung Pan/ Tilt Power Head and accessories

Owing to this systems highly integrated nature I am not minded to sell items separately.

Manfrotto 114 Heavy Duty Dolly

The 114 dolly can carry a load of 60 kg/ 132 lbs. Fitted with 127 mm/ 5 inch individually braked swivel wheels with plastic cable guards. Designed for single foot tripods, not double spike. Folds easily for carrying and has a grab handle at the centre. No case.

Excellent condition. Weighs 8 kg/ 17.7 lbs. Source: B&H NY

http://www.bhphotovideo.com/c/product/553954-REG/Manfrotto_114_114_Heavy_Duty_Cine_Video.html

Manfrotto 528 XB Heavy Duty Tripod

Designed with Jibs in mind, the 528 can support loads of 50 kg/ 110 lbs with ease. To ensure maximum safety at high loads, the two stage legs (outer steel, inner alloy, er, I think) are equipped with 5/16”/ 8 mm steel load pins that insert into numerous pre drilled holes in the inner stage, the outer stage tube resting on these pins instead of relying solely on the friction locks. The pins are tethered to the base of each outer stage by a thin multi strand flexible steel cable to prevent them being lost.

(Strangely, the existence of these pins/ holes is utterly denied by Manfrotto and practically everybody else)

Each leg is fitted with a reversible foot; spike one end, rubber tipped the other. These are changed (and all joint fixings can be tightened) using a 4 mm Allen key carried in the plastic tool clip on one leg. The permanently attached spreader arms have press button extension and retract, the locked position being a simple press on the spreader centre boss.

The half bowl is 100mm. Fitted by straps to each leg is a three cornered Bogen “bits” bag. There is a un- padded Bogen carry case with handles and shoulder strap to fit the tripod. The 500Ball that is usually supplied with this unit is missing but is superfluous for use of the jib.

Excellent condition. Weight 7.4kg/ 16.3 lbs Source: B&H NY

http://www.bhphotovideo.com/c/product/290858-REG/Manfrotto_528XB_528XB_Heavy_Duty_1_Stage_Tripod.html

B. Hague K12 Jib and accessories

Precision manufactured in aircraft quality alloy, this jib is quick to assemble/ disassemble, easy to use and has exceedingly smooth bearings in both pan and tilt axis. With a 100 mm half bowl (100 mm to 75 mm reducer supplied) at the business end for fitting your choice of head (also drilled to accept an underslung pan/ tilt unit) and a very heavy-duty steel pin at the other to accept standard barbell type weights (4 X 5 kg/ 11 lb available for free if you can afford to ship them!), plus a lockable built in “fine tune” balance weight for perfect balance every time, it is simply a dream to use.

For maximum safety the jibs central pivot block attaches to and seats into any standard 100 mm/ 75 mm half bowl tripod (no reducer required) just like a standard half ball head and is locked down using it’s own clamp knob system. To be absolutely clear on this point, the jib DOES NOT require the use of a pan/ tilt head to affix to the tripod.

It has built in drag control, a monitor bracket and a special unit I had made to allow the attachment of a standard Manfrotto pan bar (not included) for jib control and Lanc/ power pan/ tilt unit controller mounting.

With three different length configurations available and camera weight handling from 9 kg/ 19.8 lbs (longest config) to 14 kg/ 30.8 lbs (shortest config) it will take pretty well anything you want to mount on it. At its longest length, with the 528 XB set to maximum height on the pins, it will take the camera to over 4 metres/ 13 feet above ground level.

Comes complete with its own padded carry case with end and centre handles, 100 mm to 75 mm reducer and custom pan arm mount bracket. Also included is a wiring harness comprising the underslung power pan/ tilt head controller 20 foot extension cable and SD video feed.

Full parts list and assembly instructions in the carry case.

Excellent condition (5 kg weights a bit scruffy, wire brush and spray paint job).

Jib & case weight 20 kg/ 44 lbs approx. Counterbalance weights 20 kg/ 44 lbs. Source: B. Hague, UK

Hague Multi-Jib K12

B. Hague Underslung Pan/ Tilt Power Head

Designed to attach under the business end of the K12 jib (screws provided) this unit provides full 2-axis 360-degree rotation. Powered by either 4 internal AA cells or an external 6V supply (not included), it will work with cameras up to 2.5 kg/ 5.5 lbs weight.

It has variable speed and is fully adjustable to allow the cameras centre of gravity to be aligned with the vertical axis drive shaft.

The (wired) unit remote controller has been modified to allow it to be attached to a standard Manfrotto pan bar (not included) so that both jib pan and power head pan and tilt can be controlled simultaneously with one hand.

Excellent condition. System has it’s own box with assembly and operating instruction therein.

Weight: 1.7kg/ 3.75 lbs Source: B. Hague, UK

Hague Underslung Remote Pan & Tilt Power Head UPH

Extras

Completing the package is a 5” SD LCD touch screen** monitor with wireless remote, two NiCd battery packs, two “plug pack” chargers (UK plugs) and one Universal mains plug adapter. Full set of instructions, connecting cables/ adapters etc in the box.

** It says so on the box, don’t think I’ve ever figured out how the “touch” thing works though!

And, finally

Questions? Ask me.

CS

.

Re: Pro Heavy Duty Jib System - Complete

Hmm, stiffed me on the photos.

This system is going to be hellishly expensive to ship, especially to Oz, so really looking for a Kiwi buyer.

CS

Sony HVR-V1U for sale

Selling my Sony HVR-V1U that has been hardly used. Looks new and in excellent condition. Do not have the original box.

PACKAGE INCLUDES: · Sony ECM-NV1 XLR Microphone · Sony HVR-V1U NTSC Video Camera Recorder · Sony Power Adapter · (1) Sony NP-=F970 Battery Pack · (1) Sony NFP-570 Battery Pack · Sony Lens Hood w. retractable lens cap · Sony Remote Controller / AV Cables (RCA and component) · · USB cable · Sony Large Eyecup for viewfinder · Tiffen 62mm UV Protection filter · Sony manual and CD.

Sony HVR-V1U Camcorder Hour Meter is as follows:

Operations: 14 x 10h = 140 hours

Drum Run: 12 x 10h = 120 hours

Tape Run: 10 x 10h = 100 hours

Threading: 18 x 10 = 180

Price: $1500.00

Re: Igus DIY Motorized Slider for sale

Sony FS100 w/ A-mount adapter

Selling my FS100 after years of good service.
It's in great shape. It comes with the Sony 18-200mm kit zoom and all the standard equipment the camera came with - recharger, power source, cables, etc. I'll also throw in the LA-EA1 A-mount lens adapter. Comes with 3 batteries: Sony NP-F970, F770 and a Pearstone F770.
Total operating hours is only 270 hrs.
Asking $3,200. S/H is $30. Email Glen at vanvideo@aol.com or call me at 904-955-0899. Thank you!

I shot these videos with the camera, as an example:

https://vimeo.com/53582050#at=0

Re: Canon 5d Mark 2, with accessories

I see I went a little too expensive for comparable cameras for sale.
Both still have the grip, Magic Lantern installed, batteries, charger, and at least one 32GB Transcend CF card

$1200 for camera with 25,000 clicks
$1150 for serviced camera with 75,000 clicks,

OR $2250 for both. If you buy both, you get a total of six 32GB CF cards (transcend)

contact me at Robert@rnbweddings.com

Re: Lamps / Porta Brace Carry On ENG Camera Bag

lamps sold

----

Dimensions for porta brace:

Internal Dimensions: 26" Long x 6" Wide (not including viewfinder "pocket" or the two side pouches) x 7" - 10" Tall (shortest at the front, tallest near the middle)

External Dimensions: 28" L x 12" W (including viewfinder & pockets) x 12" T (at tallest point)

Weight w/ strap: 5lb

JuicedLink RA333 Riggy Assist Low-Noise Preamp - Asking $375 shipped

I am selling a barely used JuicedLink RA333 Riggy Assist Low-Noise Preamp. I am including a RB401 Riggy Bracket. The Riggy bracket adapts additional accessories such as a wireless and shockmount to four 1/4-20 screw fittings.

All that's missing are the cork protection strips for mounting to the bottom of a DSLR. Asking $375 shipped. I accept Paypal. Email me at jim@jmnproductions.com. Thanks for looking.

Sony HXR-MC1 POV Camera

Headline says it... Camera is in perfect functioning condition, although it has some wear from use. Glass is flawless.

Comes with the full accessory set which includes 2 batteries, the AC adapter, the LANC remote, carry bag/case, wide angle adapter and a 32GB Sony Memory Stick Pro Duo card. Selling because it's just not being used much anymore. My clients have discovered what I can do with a DSLR and that's what's now required of me (which also makes hiding cameras on stage a lot harder). I've been using it for a couple years for shooting classical and jazz music performances.

In the pictures, you'll see a couple nicks in the screen. They are not actually in the screen, but rather in a screen protector. They don't affect a thing.

Ideally, I'd like $850 for the full rig. Would consider trades under the right situation for Canon DSLR gear (I'm running a 7D and a 60D right now).

--Ben

Re: Sony HVR-V1U for sale

Here are some pictures of Sony HVR-V1U

MTF Nikon to 1/3" Bayonet Adapter - MINT

I have a MINT*MTF Nikon to 1/3 bayonet adapter for JVC, Sony, and Panasonic 1/3" camcorders. Never used and and in MINT condition. Here's your chance to put Nikon F still lenses on your 1/3" camcorder. Retails for $315 but I let it go for $175 shipped to your door from ZIP 20002.

https://www.lensadaptor.com/nikon-13-bayonet-adaptor

Let me know if you have questions: giganova@giganova.com

Re: JuicedLink RA333 Riggy Assist Low-Noise Preamp - Asking $375 shipped

Price lowered to $350 or best offer.

Re: JuicedLink RA333 Riggy Assist Low-Noise Preamp - Asking $375 shipped

Jim, feel free to donate the beachtek to my college program if it doesn't sell ;-)

For those unfamiliar with available materials, if I were to buy this under-camera mixer I would swing by my local auto parts store for sheet gasket material. This is available in rubber and rubberized cork about 1/16" thick, either would be fine when cut to size and contact-cemented (rubber cement) to the top of of the mixer.

If that wasn't enough thickness to prevent the camera screw from bottoming out in the tripod socket, I'd use a double layer.

Cost ya' $4 USD plus some glue...

Re: Canon 60D, 50mm 1.4

Re: JuicedLink RA333 Riggy Assist Low-Noise Preamp - Asking $375 shipped

Thanks, Seth - great suggestion.

Just to be clear, it is a JuicedLink and not a Beachtek product. - Jim

Re: JuicedLink RA333 Riggy Assist Low-Noise Preamp - Asking $375 shipped

That's a nice looking unit. The JuicedLinks have really low noise.

To put something between, say, it and something else, what I use is a small pad of anti-skid shelf or drawer liner, similar to this: anti-slip shelf liner,drawer liner wholesale

It is only about a millimeter or so thick but when the two parts are tightened together it squishes down into nearly the thickness of a couple sheets of paper, and .... nothing slips!

No glue required and it doesn't leave any marks. In fact, it really protects the adjacent surfaces.

Re: Sony FS100 w/ A-mount adapter

Re: Sachtler Hot Pod Tripod Aluminium 100mm

Ugg, if I wasn't so committed to spending 300 million on new cameras this years, it's exactly what I was looking for.

Sony AX2000 w/ accessories

Camera package for sale! Camera is in good condition. I'm selling to fund a new 5diii and new L glass.
Sony AX2000 with camo skins
Camo skins can be easily removed.
1 large battery (BPS-F975)
1 small Sony battery (NP-F570)
original box, battery charger and accessories
Hoya UV filter
64 gb card, 16 gb card
Rode NTG-2 mic with dead cat and XLR cable
Manfrotto 521 pro Lanc controller
$3600 free shipping
please email me joshmcconnell80@gmail if you have any questions.

Re: JuicedLink RA333 Riggy Assist Low-Noise Preamp - Asking $375 shipped

Another great suggestion, thanks John.

I am reducing the price to $325 shipped or best offer.

Selling my Sony HXR-NX5E, two years old, operation time 13 x 10 h, very god condition.

Also included is a PowerLok (NP-F970 type) high capacity Li-Ion battery.

€2,980

Canon 20D - 300D or similar (30k++)

Hi guys, im looking Canon DSLR for to gift to my lil daughter she's only 7 years old, , i was thinking on 10D or 300D by price, but also want to consider by weight, for her my 60D gripped with my 18-200mm its too heavy, but she can handle it, and actually love it, but get tired fast.

If anyone sells any model with high shutter count 20D or 300D or newer, depending on price, if bundled with some lens will be great (20k,30k,+++).

Thanks for let me introduce my daughter to this wonderful world

Re: Canon 60D, 50mm 1.4