DV Info Net - Private Classifieds listings from 2010

DV Info Net (https://www.dvinfo.net/forum/)

- Private Classifieds (https://www.dvinfo.net/forum/private-classifieds/)

- - Private Classifieds listings from 2010 (https://www.dvinfo.net/forum/private-classifieds/143456-private-classifieds-listings-2010-a.html)

Why not list what you have.

Yes, they do indeed have a 62mm ring to use this adapter with your V1U.

I may be interested in this as I am looking for my first Letus.

Any flexibility on price since you're pretty close to new?

cinevate uno

FOR SALE: Canon 20X Flourite lens for Xl1, XL1s, XL2, XLH1

$400 OBO

Canon Video Lens 20X Zoom XL 5.4-108mm L IS 1:1.6-3.5

This lens is in mint condition. I am selling off some of my gear and simply do not need this lens. This was lightly used used in a smoke -free studio and has no wear or scratch marks whatsoever. It was a back-up lens. If you put this lens next to a new one out of the box I doubt you could tell the difference. The auction is for the lens with front and rear lens caps.

This lens is selling on B&H for for $1560.

http://www.bhphotovideo.com/c/product/349737-REG/Canon_9825A002_9825A002_20x_Zoom_Lens.html
Here are the specs:
The Canon 20x zoom lens designed specifically for the XL-2 and XL series miniDV camcorders. The lens is backward compatible with the XL-1, providing improved quality over the original 16x model and forward compatible with the XL-H1. Features include added servo control in manual mode, improved low-speed crawling zoom, 16:9 and 4:3 aspect compatible and fluorite optics.

Optical Stabilization
During long takes, arm strain, focal length and environmental conditions can often make footage appear too shaky. This lens features the Super Range optical stabilization system, providing smooth shots every time.

Backwards Compatible
The 20x lens is completely backwards compatible with all XL series cameras, including the oldest model XL-1. The lens also functions with the new XLH1 HDV camera.

Fluorite Lens
The lens uses fluorite, a material that provides outstanding resolution, contrast, and color reproduction. The fluorite element inside the lens defeats color aberration, an effect that causes a reduction in sharpness, contrast and color.

Aspect Ratio
Aspect ratios of 4:3 and 16:9 are supported when using this lens.

x1 NEW IDX Endura E-7S

I've got one brand new IDX Endura E7S battery, never removed from box. Least expensive I could find was $209 + shipping at B+H.

$160 + $12 shipping lower 48. PayPal accepted.

x1 new IDX Endura TK-E1 Battery Checker

One brand new IDX Endura TK-E1 Battery Checker, for IDX Endira E-7, E-10, E-50 and E-80. Never used - here's the skinny on it if you want to know more:

http://www.idxtek.com/sites/default/...u_E_060310.pdf

Believe it was $150 new, will sell for $75 + $10 shipping lower 48. PayPal accepted.

Mackie MR5 Studio Monitors (pair) as new

One pair of Mackie MR5 studio monitors - bought these new about two years ago, and ended up never using them. They are in perfect, as-new condition, but I recycled the boxes they came in looooong ago.

Here's some more info should you like:

Mackie - MR Series Studio Monitors

Checked and saw that they are still selling for about $350/pair, will sell for $250 + $20 shipping lower 48.
PayPal accepted.

This has been sold to David.

Many thanks to David.

Would someone mind letting me know if my price is reasonable on this item?...I'm not the greedy seller type, I really just want a fair price and for the camera to end up with someone who's going to actually get some good use of it (and enjoyment, more importantly)...as a lover of all things photographic, it bums me out to see good equipment go to waste, so while I personally don't have a use for the camera, I'd love for someone to use this guy as its intended to be used...if I'm way off on the price, I'm completely open to offers and/or suggestions, so please, toss in your 2 cents, I'd really appreciate it.

thanks,
tim

Firestore FS-C or FS-CF

Looking for a Firestore FS-C or FS-CF for my Canon XH-A1. Please contact me if you have one in good working condition that you'd like to sell. Thanks.

HoodMan 3.0, an eyepiece upgrade from the standard one included with the HoodLoupe 3.0. It provides 3x magnification and a tight seal to keep out ambient light, only use once for sale : $75.00, please email me : johnvideopro@yahoo.com , or call me at 714-797-3447

It's a DV/SVHS deck with 4pin firewire in/out.
Barely used, been sitting in a closet for 2+ years.
Someone make me an offer.

You might want to list the lenses. I'm pretty sure the 8mm fisheye will fetch a couple of hundred by itself. As for the K3.. I got mine for $50-, and I was the only bidder.

Sorry for the delay in the response...Just got back in town. I do have pic's but don't know how to add them to the post. Is you give me your email address I'll gladly email them to you.

Item SOLD!

Thanks for looking!

have you seen my thread about my FS-H200 with a super nice mount for A1s or A1 check it out

http://www.dvinfo.net/forum/private-...32gb-card.html

Sony Vaio Core2Duo desktop

Model VGC-JS270J all-in-one
20" Monitor
4GB RAM
500GB HD
Windows VISTA(includes Windows 7 upgrade disc)

Like new condition. Low hours. Includes keyboard, mouse, windows 7 disc, original box.

$499+shipping

JVC Professional 15" NTSC Monitor

Model TM-H150.
Like new condition
Low hours

$249+shipping

ADS PYRO DV Converter Box

ADS PYRO A/V Link.
Composite, Component, S-video connections
Good condition
Includes Manual, a/c adapter

$99+shipping

Do you have picture?

Yes I have a picture, but unfortunately the product is only for sale within the U.S.

Quote:

Originally Posted by G. Lee Gordon (Post 1549241)

I do have pic's but don't know how to add them to the post.

If you click the "Post Reply" button you will see a "Manage Attachments" button towards the bottom of the Reply page.
Clicking on that button will open a window which allows you to add/upload photos from your computer to your reply.

-Ken

Sony HDCam and BetaCam

I've got two cameras for sale---bodies only at the moment.

1. Sony HDCam HDW-750. $25,000
*Hours: Drum Running: 1399
Tape Running: 784
Operation : 1488
Threading: 1628
*Camera had pixel clearing, maintenance and full RF envelope maximization (brushes, etc) at Sony Service LA in late 2009; minimal use since.
*HD color viewfinder model HDVF-C30W (after-market replacement, $10K new)
*V-lock IDX plate with screw taps for wireless bracket and a D-tap
*New 2005, still in service
*Portabrace carry bag & Sony hardshell shipping case
At (or near the asking price), I'll also throw in an AJA HD-SDI to SDI converter box, powered by a camera D-tap. I use this to downconvert the HD-SDI jack on the camera to an SD feed for wireless video or SD feeds.

2. Sony D35WS Betacam w/dockable PVV-3 Beta deck. Switchable 4:3 or 16:9 ($3,000)
*Hours: Head Drum 1687
Tape Transport: 997
Total Op: 1840
*Relatively new heads (3rd set)
*V-lock IDX power plate w/ D-tap
*New 2002
*Portabrace carry bag & Sony hardshell shipping case.

Cameras are located in the Pacific NW.

FYI - This is without Neo Booster.

Canon XH G1 or G1s

Hi. Just looking to see if there is a Canon XH G1 or G1s on the market. Willing to pay $3500-4000.
Thanks,
JF

Hi Thanh,

I'd be interested in buying one of em without the handheld mic.

email me at contact@davidschuurman.com

thanks

Canada has an agreement with US to protect each others ‘special’ frequencies especially within (I think) 100Km from the boarder. Anything US does Canada has to adopt it and anything Canada does US has to adopt it as well. Therefore, Industry Canada has adopted the same restrictions in Canada as FCC adopted in US regarding 700MHz band.
Read this two articles:

Spectrum Management and Telecommunications - Consultation Paper on Low-power Licensed Radiocommunication Devices, Including Wireless Microphones, in the Band 698-806*MHz
Spectrum Management and Telecommunications - SAB-001-10: Low-power Licensed Radiocommunication Devices, Including Wireless Microphones, in the Band 698-806 MHz

Marshall V-LCD 70P-3GSDI

Selling my Marshall on location LCD,Havnt used it too much,bought it for Sony ex1,also battery plate is for EX1 type.Unit work as it must,and looks like new.Power adapter included.only addition i have made to battery plate,fitted little power in (like steadicam pilot have)
ask for pic's.

Asking 525 £ plus shipping.

Regards

Raul Rooma

Customize Sled & Vest for sale

With all the good advice from some to keep these items I decided to sell regardless. I will entertain your offers but as I know most of you here are on a tight budget I may or may not get the price range I'd expect. The rig is estimated between 8-10K for both vest and Sled. Now this is allot for many on this board but like I said, I will entertain your offers and if I see something I like, than fine. I'll let it go for that price. But what you get are components that you will find on top stabilizer brands. N.B. The sled comes with only one AB Trimpac 14.4v battery. I have two more that I borrowed as well as a charger. But guy is willing to sell it. So if you're interested than he will give me a good deal. As you know chargers cost a lot and this one have place to charge 4 AB batteries.

Custom sled:

* 1.5" outer Carbon Fiber post

* Aluminum inner post (not painted)

* Steadicam Archer I top stage with a modified 3-pol 24v contact addition ( bought from Steadicam operator Rick Lewis. Rick had the 24v installed)

* Lower junction box contacts have:

1. 2 Hirose 'video out'

2. 2 BNC 'video out'

3. 2 (2-pol) LEMO 12v 'power out'

4. 12/24v (3-pol) LEMO 'power out'

5. HD-SDI contact (not wired internally)

6. 1 12v 'power in' (MK-V wired)

7. 1 12/24v 'power in' (MK-V wired)

8. ON/OFF switch for entire system

9. 12 to 24v switch

* 1 12/24v dual AB Battery Mount (from MK-v)

* 1 AB GOLD battery mount

* Steadicam EFP Gimbal ( bought from Steadicam operator, Steve Fracol. It was serviced before I bought it)

* MK-v EFP replacement knurled gimbal grip

* A 4-point VD (video distributor). So all video outputs on the bottom connectors are wired. There is one contact left over for another.

* The lower lower battery mount can be adjusted for fore & Aft, by loosening the Manfrotto 357 slider. I had another slider which made it easier for micro adjustment but it did not deem too be very solid. So I exchanged
it for the 357, which is more solid. Any number of batteries can be used. 1-3. I installed a Schottky diode within each battery mount for extra safety. This prevents power from flowing back into itself. There are two Automatic 5A fuses installed. (you can replace these 5A with 10A instead. My Tech guy felt the 10A wasn't needed at the time, since I was not flying anything that power consuming. I had planned on changing it but never got around to doing it) . The fuses are marked with the number 7 & 8. When this trips all you have to do is push the button to reset the system.

The internal wiring of the system, which is pretty much the same as the standard systems available today. You get a rough schematic of the internal wiring of the system, which is pretty much the same as the standard systems available today. But just to be sure I did a schematic so you know how the wiring is done.

The monitor is an 9" SD monitor. Nothing fancy except you can rotate the pic. This works perfectly if you decide to go into low mode and do not want to rotate the entire monitor. The monitor has a 450nit. I know it is not that much but you can replace it or you can just decide to get the sled without the monitor. But you will have to make your own monitor mount. The rods are Cf but only strong very light monitors. I would suggest aluminum rods instead.

.........................

* A heavily modified EFP Steadicam vest. I had new parts machined with thicker material at the chest plate and spar, since the original spars were broken when I purchased the vest from Steadicam operator Elite, Steve
Fracol. I also machine a new female standard socket block. I modified the vest to have ratchets instead of the velcro.

-------------------

http://i55.photobucket.com/albums/g1...ems/photo4.jpg

http://i55.photobucket.com/albums/g1...ems/photo2.jpg

http://i55.photobucket.com/albums/g1...tems/rig_2.jpg

http://i55.photobucket.com/albums/g1...ems/photo5.jpg

http://i55.photobucket.com/albums/g1...ems/photo6.jpg

http://i55.photobucket.com/albums/g1...ems/photo7.jpg

John I sent the message below to the email listed on your website and it came back as a failed delivery:

John, this is Tim in Dallas, I've tried calling and texting you about the Xl H1 housing, but I keep getting a message that says your mailbox is full...I've got a gig coming up that'll require some water work and I'd really like to ask you about the housing (I've never had a water shoot)...I'm definitely interested in buying, but just need some clarification on a couple of issues before I pull the trigger...if you still have the housing, please give me a call when you get a minute (972.746.1665)...I think you tried calling me back initially but I was on the other line with my Dad trying to explain how to use Netflix (I felt like sticking my head in the toilet after 15 mins of breaking down how the instant feature worked...Dad<technology) and failed to recognize your area code (sorry 'bout that)...anyway, I'm usually available (seriously), so I hope to hear from you

later man
tim

Hey FEEDBACK!!!!...alright, thanks Kin, 136 views later I finally get a little direction...if ANYONE out there is interested in this camera, its literally just living in my closet and is eager to see the light of day, so just make me an offer and we'll take it from there...although, while I agree with Kin's assessment, I'd prefer to keep this a full package deal.

ugh that sucks, guess I cant use this then.

email me at info@zsionmedia.com and I'll email you pictures.

Porta Brace CTC-2 bag

Porta Brace CTC-2 bag - excellent condition.

See the Porta Brace link at: PortaBrace - Product Detail:CTC-2

Sized for XL-1, XL-1S and similar sized cameras, plus accessories.

Asking $125.00, includes shipping

Pay Pal OK.

thank you for all interest and clarification guys. Man i just need to get rid of these didnt know it was this hard to sell LOL.