DV Info Net - HD100 blown firewire port

DV Info Net (https://www.dvinfo.net/forum/)

- JVC GY-HD Series Camera Systems (https://www.dvinfo.net/forum/jvc-gy-hd-series-camera-systems/)

- - HD100 blown firewire port (https://www.dvinfo.net/forum/jvc-gy-hd-series-camera-systems/181098-hd100-blown-firewire-port.html)

Quote:

Originally Posted by Tup Wright (Post 1136111)

... and I so I bought a $25 port isolator and a separate HDV deck.

Hey, where did you get the port isolator? I'm trying to find one for my HD110. I already blew the firewire, fixed it, and I really don't want that to happen again. Please let me know.
I've tried other links people posted but they were dead-ends.

Thanks!

Quote:

Originally Posted by Tup Wright (Post 1136111)

I think JVC should fix this for free. This is a design flaw that affects all the camcorders with the 6-pin firewire. They should fix it for free and remove the two pins on the port that send/recieve power. I hope to get 5 years out of my camera, I'm two years out of warranty now and I so I bought a $25 port isolator and a separate HDV deck.

These cameras were full of design flaws. It's the same story with original tape mechanism, which was notorious for braking down.

Quote:

Originally Posted by Ben Garvey (Post 1136241)

Hey, where did you get the port isolator?

Thanks!

Look in this post, firewiredepot.com I think you can find them cheaper elswhere.

http://www.dvinfo.net/conf/jvc-gy-hd...-firewire.html

Firewire Port Isolator Link

Quote:

Originally Posted by Ben Garvey (Post 1136241)

Ben,

I have 2 HD100s and invested in a couple of firewire port isolators as per Tim Dashwood's suggestion several years ago and thankfully, I have had no problems with my cameras. I went tapeless 2 yrs ago, capturing directly into my DR-100 units, and I simply leave my port isloator cables attached to the cameras ALL THE TIME so that I never forget to use them. And of course, as you already know, ALWAYS power off both camera and HD/computer/dect before attaching or detaching the cables.

Here's where I got my cables. You can even have them custom designed to various lengths with right-angled connectors for an addtional fee. Just make sure you carefully consider which angle/direction you really need before ordering if you decide to go that way.

FireWire Port Isolator - 6pin - 6 inch

Cheers,

Michael Lafleur