![]() |
HDV shooter needed in Houston, TX: July 2, 2005
I need an experienced HDV shooter who has his/her own camera for a 5-hour job (about two hours of prep, 2 1/2 hours of shooting, 1/2 hour of breakdown). This is in Houston, TX, on Saturday, July 2, 2005, from about 11 a.m. to 4 p.m. The event is an ethnic fashion show.
I'm bringing my own HD10 so I'd prefer someone who has an HD10 or HD1. If you're an FX1 / Z1 shooter, well that'd only work if you have two of them so I could operate one of them. It would probably be too risky to try to match 1080i and 720p30 footage even if I deinterlaced and converted the 1080i to 720p30, let alone all the time that would take. Please email me at tvwriter_at_mac_dot_com (no underscores, @ instead of "at," "." in place of "dot." The job pays $260 and you'll need to supply your own tapes (3 of them). Thanks. |
and they have to buy you lunch
|
Quote:
|
$260 doesn't seem like very much anyway. Then you want them to supply three tapes too. You want them there for 5 hours. They have the equipment and they have to supply tapes. They have to drive there. Probably it's an all day deal. For what, after everything? A couple of hundred bucks?
You should at least supply the tapes. |
Quote:
I believe in the Golden Rule. I would be perfectly happy if you or anyone else paid me $260 for a 5 hour job where I supplied the tapes. If you feel offended by paying me only $260, I'd be happy to relieve your conscience by accepting more than that. I'm in Illinois as well, so please keep me in mind. Thanks. The reason I thought that it's a good idea for the other person to supply the tapes is that I figure people are particular about which type of tapes they feed their camera. Further, it could pose a problem for me if I was to run around town finding their particular tapes, or mail ordering them. I am open to compensating for the cost of the tapes that the other person uses. ~$50/hour is apparently beneath your dignity. I apologize for having insulted such a great man. By the way, I'd personally take the person out for lunch if they'd like, maybe to Pappadeaux or Pappas Brothers. |
OK,,,,$300 is not to bad.
|
My day rate is a bit more than that.
And I live in Dallas so I'd have to have travel covered. And I have an FX1, which isn't what you're looking for. So.....you want me? ;) |
Quote:
If you had a Losmandy Spider Dolly along with your FX-1 skills and five hours of work, for the added value I could probably justify paying $450. I'd then have to rent an FX-1 or Z-1 for myself though, so I guess the budget would be busted in that case. I'll probably end up using my old-fashioned three-wheeled dolly. I'll get the hotel to lay down some hard flooring over the carpet beside the runway (it's a fashion show) so I can run my dolly smoothly over it. In case you've never seen the spider dolly, take a look: http://www.zacuto.com/spiderdolly.htm If you know an HD10 shooter in Houston I'd really appreciate it if you referred them to me. I know Texas is a big place but I'm saying this just in case. There must be FX-1 / Z-1 people who have HD10s sitting in dark closets. Thanks. |
I'm seeking an animator, preferably flash, for a long term project
Hi, guys. Hopefully this doesn't end up in that thread about ridiculous job offers/demands.
I am seeking an animator to work on an animated,episodic series based on this short film, "The Ninjews" ( http://www.joshbass.com/Ninjewswm9.wmv ). This short film was included on the Spike and Mike "Sick and Twisted" DVD in 2003. PLEASE NOTE: THOUGH THIS MOVIE IS CLAYMATION, I AM *NOT* LOOKING TO DO THE REST OF THE SERIES IN THAT MANNER. I was thinking of simple 2D animation, along the lines of Aqua Teen Hunger Force or Sea Lab (reused sets and character designs, that is). I am partnered with a growing internet television company called maniaTV ( www.maniatv.com ) hosts of the show "Too Short for Hollywood (10pm EST), whose site received more than a million hits last month. This will be a long term project, as I am currently contracted to produce ten 5-7 minute episodes, with more likely to follow. The turnaround time on each episode will be six weeks or less. This is a paying gig, though the budget for this project is very modest (and I'm not in charge of it, so don't shoot the messenger). The episodes will be shown on ManiaTV, with exposure to a worldwide audience. As ManiaTV continues to grow, so will the budgets and pay scale for this project. As it stands, this project might be better for a student, or someone looking to build their animation reel, though anyone is welcome to apply (I do need to see samples of your work, however). If interested, please email: joshbass at sbcglobal dot net. Now, I know this is not an animation forum, but I've known you guys for a long time, so you're the first ones I thought I'd post this ad to, just in case anyone on the board, or someone a board member knows, might be interested. If you know of any animation-centered forums around the net, or other places to place this ad and seek help, also let me know, please. I have a few places I'm already going to, but the more, the better, says I. So, again, thanks. |
Looking for DP
Looking for a DP with experience with mini35. We are shooting a 25 min short on DVX100a. Shooting possibly lasting 2 days.
There is possibly pay. I have my own equipment. Send me an e-mail or link to your reel. Also tell me your rate. regards jun jun@koolwebb.com |
Michigan cast and crew wanted
Hi everyone
I'm looking for some fun loving cast and crew members to shot a amateur short film this summer/fall. The script is complete and i'll be starting storyboarding next weekend. I could really use a sound person, actors(I have only 1 of the 9 roles filled at this time),I plan on doing the lighting but can always use help. My goal is to learn as much as about filmmaking as possible and have fun while doing it. Thank You Michael P.S. Contact me at: Dfcasting@aol.com |
looking for screenwriter $$
I need someone to put together a screen play for a short film project, estimated about 45 min.
this is a sci-fi film and most of the fight scenes are put together already..I just need something put on paper to begin storybording this thing.. while 18 hour days are put into pre-production here. will pay for your time.. contact me at Pmander@cogeco.ca. I will call and go over the rest of the details. so much to do so little time. thanks pete |
Where are you shooting?
|
location
I apologize, we will be shooting in Los Angeles and the surrounding area.
Currently looking for any sound person with their own equipment. e-mail me for more info if in the area and interested. jun jun@koolwebb.com |
Josh, it really just depends on what you are willing to pay. I'm over here in Thailand and I can set the whole thing up for you, but here at least, it is a $$$ issue.
Rgds, David |
Email me and I can tell you.
|
Director of Photography needed...
I'm from Cape Breton, Nova Scotia, and I am wondering if there are any DoP's in the area. My Company, Prince Mike Pictures is in the process of doing a Comedy Television Series and we want to see who we can get to fill this spot in the crew. Please let me know or email me at mikelong@princemikepictures.com
Thanks, |
Looking for Dolly Operator w/dolly (or rent)
Hi all,
I'm setting up a one day production 2 weeks from now. I have a cameraman (he's using a Sony beta sp cam), but I'm interested in getting a dolly and operator. Please send me your info if your interested (day rate, equipment, questions, etc...) You can reply direct to landsdraft@yahoo.com if you like. Thanks a bunch, JL |
Moved to the Helping Hands forum
|
Shooter needed for Fort Wayne, Indiana
Looking for an assistant. I have an XL1s that would need an operator for weddings, Bat/Bar Mitzvahs, ect. If interested, please email me.
1avc@comcast.net State in subject line Videographer for Fort Wayne |
Shooter in LA
Help! I need a good interview videographer in the LA area to do a short, 1 subject interview. Total tape time will probably be under 30 min. With setup and take down, you can be in and out in an hour or so.
You will need: 3 chip cam (other interviews for same project used GL-2, XL-1s and a PD150) Decent wired or wireless lav mic Basic lighting kit And skill to use all of the above, while putting subject at ease. Small budget project, but can pay approx $100 for a good job. |
Mass DVD Copies
I have a DVD duplicator and this sucker ROCKS. I can burn about 60-70 in an hour. If you need a LOT of DVD's burned and have little time to do it in or just have too many to copy and it makes your head swim... let me know!
You supply the DVD's and shipping charges... I'll charge next to nothing. Well, maybe 50 bucks next to nothing. LOL |
looking to borrow SteadyCAm in VANCOUVER, BC!
hi, i'm helping a friend do some test shoots on WED june 22nd and i'm looking to borrow a steadycam jr or glide cam etc... for my panasonic dvx100a....i know this is kinda lame to ask for help..but if there is anyone out there who can help out for wed night it would be great....i'll buy the beer..
thanx u can reach me at Saturnin9@hotmail.com or http://www.anvilpictures.com thanx |
Josh, try cgtalk.com. They have a forum and you can find an experienced animator there in all likelihood.
|
will help you shoot in NJ/NY metro area. Gratis (no charge that is )
Eqpmt:
pana dvc30, AT897, XLR adpt, light, manfrotto tripod w/ 501 head, monopods. I do post in Vedas5 not sure how important this is thou. If interested mail me to: tomapete34@aol.com Thank you Mike |
Los Angeles based Indie Filmmakers
I started an Indie filmakers group on MySpace.com to meet other people who can help with projects which include Actors, Directors, Screenwriters etc. Please join if you are in the L.A. Area and would love to meet and help other people out. The link is below:
http://groups.myspace.com/FilmNetworking |
Lowells Ok?
I have a new lowell kit with 3 heads gels scrims etc. AND a new XL-2 and mics.I have 20 years experience shooting and lighting but very little in your segment of the market which I know is blowing up.Give me a call if you're interested in possibly working together-Tom 516 458 4035
|
Quote:
|
T-Shirt/Embroidered Polos and Hats and More
I would to apologize if this sort of thing is frowned upon, I have been a bit undecided on whether or not to offer my services to you guys, but I thought that I might be able to help you guys out if you're looking for promotional items.
By day I'm a sales rep for First Gear, a screenprinting and embroidery company in Kentucky. We're running some summer special for promotional white t-shirts with a two color front, 1 color back, free custom artwork and screen fees w/ a First Gear Logo (about 2" wide) for bottom line price of $3.99 per shirt. Shipping would be estimated for this type of order at right around $25 for the order. I know that at bridal shows and other events promotional items can play a major role in drawing people to your booth, and really getting their attention. Also, if you are interested in more or less, please feel free to drop me a line, as this isn't a firm number special. Also, if you're looking for some professional looking twill button shirts or polos with embroidery work, we can also supply you with some nice casual wear with no minimum order requirement. We offer a full catalog, partially browsable on the web, and custom artwork for the sew. Digitizing fees would apply to graphics. I'm not trying to push any of this on you guys, I just see how awesome this community is, and extending my services to you guys if you are intersted. You won't see me spamming this across other threads or bumping this, just as a curteousy. Thanks for the time. |
|
Thanks for your offer, Matt. Some of our moderators suggested moving your post to our "Helping Hands" board so I've done that.
|
Thanks Chris, I was unsure of where to post!
|
Anyone need a website?
Hey everyone, I'm a little low on cash so Im offering some cheap webdesign for your production. If you'd like to give your Wedding/Event videography company a professional look, or you need a page to promote a short film, I can customize an eye catching and dynamic webpage for you.
Here's what I'm offering..... for around 100, Ill make you somthing like this>> SubCulture website for around 180, somthing like this... My website>> www.anigmafilms.com I work with all video formats and can encode streaming video in Real Video format, Windows Media, Quicktime (Progressive or Streaming), or the new Flash Video format (witch I personaly like). note Im only offering the site design, its up to you to get the domain name (www.yoursite.com) and web server to host your website on. The price will depend on the safistication of the site and what you would like it to do, but I don't charge any more than 180 for design though! Im only booking a handfull of sites for the summertime and hopfully we can help each other out! If you have any questions or would like a site, please e-mail me at sphandro@msn.com thanks for looking! -alex |
Progressive/Social Justice Video Making in TN
Hi -
While inching along on my own feature length DV project, I'd like to find other things along a similar philosophical/political line to work on. Are there any other filmmakers in Middle TN who could use some help with projects that are oriented to social justice, environmental, or peace issues? I can shoot, edit, direct, or serve as a member of your crew. Looking to make the world a better place while practicing my craft. You can learn a little about me and my current project, Led To Believe, at: www.hometown.aol.com/outofthefog2004 Thanks, Allan |
Looking for Z1/FX1 shooter in Orlando Fl.
Hello,
Looking for Z1/FX1 shooter in Orlando/Central Florida area. Have shoot coming up and need 2nd camera..Please email me if any interest.. Email vidiot57@yahoo.com Thanks. Mike Moncrief |
Short-Term Equipment rental
I have a gig to tape a jazz performance of a local university school of music, and would really love to have the ability to edit down from a two camera set-up.
I have a single xl-1s, and have heard the second camera needs to be on par with the first camera, or the quality change will be noticeable when you cut between the two. I can't really purchase another xl, or even a gl. Would prefer a gl, so my daughter can operate it handily. Any advice on a reputable business where I could rent a gl-1 or gl-2 convenient to North Carolina, by this Friday? As an alternative, what about purchasing a low-end DV camera, would that really work ok? would it work somewhat ok? All help appreciated. Eddie |
I know that EVS rents cameras. Try www.EVSonline.com, but call them for fastest response. I deal with Rush there.
Considering time pressure and importance, I would not try to fool with matching to a 1 chipper at this point, although it can probably be done. |
You might also try Technical Video Systems, 527 E. Chatham St, Cary NC. 800-245-0916. www.techvid.tv. Gary Ballard is the Sales Manager and a good guy.
|
Film Composer / Feature Films
Hi,
I am a composer that has done work for film, television, and video games. I am represented by Bob Rice of Four Bars Intertainment which is famous for representing the A list of award winning composers. My music company is also associated with Hummie Mann, who worked on films such as City Slickers, Robin hood Men In Tights, and Sister Act. If anybody on this site is looking for professional music composition, please contact me. Please visit my website at: www.DanielSadowski.net for samples and info. I am currently composing for video games and a feature film with cast and crew from ER, Charmed, Donnie Brasco, A Thin Red Line, The Forgotten, and more. Sincerely, Daniel Sadowski Soundrama Productions daniel@soundrama.com studio: 253-984-0819 cell : 253-678-9323 Representation Bob Rice FBI four bars intertainment |
Good info, thanks!
|
All times are GMT -6. The time now is 06:18 PM. |
DV Info Net -- Real Names, Real People, Real Info!
1998-2025 The Digital Video Information Network