Weekend Beta 5.2.2.282
 

We where going to release 5.2.2.281, as it was working well, but instead added a little more polish.

In addition to 281 changes list (see here http://www.dvinfo.net/forum/cineform...2-2-281-a.html)

Added: 64-bit DirectShow Decoder
Added: B/W Anaglyph 3D display modes.
Added: Dubois optimized Anaglyph 3D display mode.
Added: some support for transcoding existing 3D files into CineForm 3D within HDLink, as
well as adding support for the Panasonic SDT750 3D Camera. Simply set the 3D mode
in the status viewer to match the source 3D format and convert with HDLink.
Fixed: CS4 AVI audio import.

Downloads:
Neo3D http://cineform.com/downloads/Neo3Dv522b282-101112.zip
Neo4K http://cineform.com/downloads/Neo4Kv522b282-101112.zip
NeoHD http://cineform.com/downloads/NeoHDv522b282-101112.zip
NeoScene http://cineform.com/downloads/NeoSce...282-101112.zip

P.S. All uploads should be completed by 8:15pm PST

Hi David
When I try to convert a Panasonic SDT750 raw file with HDLink (sure I set 3D mode in the viewer 'Side-by-Side'), the resulting 3D video is pretty strange. I mean left eye looks jerky, very much-like a wrong field order, but worse. (settings: quality - filmscan, frame format - interlaced, no resize etc)

It is working fine on the SDT750 files I have (very limited, just 3 clips form Panasonic directly), however I do recommend deinterlacing during HDLink conversion. Interlaced and 3D should not be mixed -- see that BluRay 3D has no interlaced support. We will need improve 3D interlaced handling if camera manufactures continue to output 60i, but in the mean time just check deinterlace. Do you have any source file samples you can share?

I checked 'de-interlace'. Same result....
try this http://webfile.ru/4899168

Just a minor problem but video formats in preview window for video capture in HDLINK are still labelled incorrectly. Gone are the multiple overcranked labels from the previous builds but there is no profile now identifying which one is overcranked. Also I'm seeing incorrect frame rate label of HD 1080p 2.4 ----> 3.00 instead of 24fps/30fps and HD 720p 5, 5.99, and 6p instead of 50fps/59.94fps 60p respectively.

James, I are talking about DeckLink capture? As I don't see the controls you are talking about.

@David

It's the HDLink Decklink window. I haven't used my BMD card in a while to capture anything, since I have been having problems with A/V sync using the BMD codec (not Cineform though) in Premiere Pro CS5. I just checked and it looks like it's a GUI issue with the combo box:

"HD 720p 5.99 - 8 bit 4:2:2 YUV"

The CFHD Decklink capture still appears to work properly using HDLink.

J

Thanks, I'm not running that card, so I don't see that GUI, but I'll parse the info along.

The file worked fine for me. Conversion was a single step, I simply set the status viewer to side-by-side and converted with HDlink (works deinterlacing or not.) I fixed the vertical offset, removed the letter/pillarboxing and made a 720p 3D file here as a tiny torrent. http://miscdata.com/torrents/00100-720p3D.zip.torrent

Yousentit.com was not responding so I thought I would try a torrent.

David

HD Link Stops working
 

Just installed 5.2.2 and tried running it with 8 5D files after the second one I got a HD link stoped working. No such problem with 5.2.1

Please repeat this test with 5.2.2, and it is reoccurs, what is the error message.

Try #2
 

I reinstalled and still received message from windows that HDLink.exe has stopped working. Neoscean hangs up with no error message in box. 5.2.1 works without a hitch. Window 7 professional 64bit , i7 , 12 gigs ram
Dennis

Please file a trouble ticket as support may need to do a remote session, as that does not make sense. Are these very long clips?

try #2
 

50 to 100mb

Tiny then, weird, I can batch them all day. Do please contact support.