DV Info Net
Page 3 of 3 12 3
Show 40 post(s) from this thread on one page

DV Info Net (https://www.dvinfo.net/forum/)
-   Canon XH Series HDV Camcorders (https://www.dvinfo.net/forum/canon-xh-series-hdv-camcorders/)
-   -   Rode NTG-2 too slim for A1 shotgun holder? (https://www.dvinfo.net/forum/canon-xh-series-hdv-camcorders/115222-rode-ntg-2-too-slim-a1-shotgun-holder.html)

Simon Sumner March 2nd, 2008 03:35 PM
Quote:
Originally Posted by Petri Kaipiainen (Post 836243)
And if you attach the SM-5 with the front part into the holder the mic moves about 10 cm back...
I'd never thought of that. I'd always attached my SM-5 by loading it into the clamp from the lens end. By loading from the eyepiece end I can now leave it fully assembled in my hard case.

Thanks for sharing!

Brian Seguin March 11th, 2008 04:50 PM
Microphone adapter
 
1 Attachment(s)
I have an AT-897 shotgun mic that is also too small for the A1 holder. I drilled and turned a small wooden adapter ring to fit the unit. I painted it black to match...

Jonathan Shaw March 12th, 2008 01:23 AM
That's very swish...

Does it hold it tight? Maybe you could knock a few out and sell them... I'm sure there are a few on this forum who would buy.

J


All times are GMT -6. The time now is 09:55 PM.
Page 3 of 3 12 3
Show 40 post(s) from this thread on one page

DV Info Net -- Real Names, Real People, Real Info!
1998-2025 The Digital Video Information Network