I am looking at the following Kata case. What do you think?


http://www.kata-bags.com/Item.asp?pid=290&cid=5&perentId=1&ProdLine=1


I have the Canon 20x HD Lens and I want to transport with the lens and viewfinder connected.

Maybe this case would be better?

http://www.kata-bags.com/Item.asp?pid=6&cid=5&perentId=1&ProdLine=1


Any other suggestions?

Although people do it all the time, I would never transport pro equipment in anything less than a Pelican. Some people prefer the supposed portability of soft-type cases but the lack of real protection they offer especially from the elements doesn't justify any weight savings or "portability". In fact, Jan is having Pelican make a case specific to the HPX500 and should be available in the coming months.

There's a reason Pelican has become the de-facto standard for mobile equipment protection from individual shooters to rental and grip houses and ENG crews worldwide. Check them out before you spend your money.

I'm not the Pelican fan you are, Robert. About 10 years ago I had the external snaps (which are pretty vulnerable if you study them) break off, yes, BREAK OFF, from hitting corners coming down a luggage carousel and nearly depost a $10,000 PortaDat and it's accesories into the turnstile... I haven't used one since - I kept that one to demonstrate to people that "tough" is only a state of mind.

I break my camera down into pieces and carry it on in a PortaBrace case (remember to take a battery too, so you can turn on the camera for security). The rest of my stuff travels in a large 30 year old Haliburton aluminum case.

For car travel I keep the camera in a CineGear production bag, which I like a lot, although with the 500 I have to remove the battery and matte box everytime I stow it.

PortaBrace has several new hard cases, but I'm not sure the snap system is any better designed than Pelican's...

And, of course, Haliburton is still around, although they're priced like Rolex watches.. but they do last forever...

Wait, 10 years ago? Have you looked at Pelican cases lately? There's hardly the vulnerability you speak of in todays case technology. I've had these cases dropped off airline belt-loaders, stepped on, hit by a car traveling at 40mph - you name it, I've seen these cases take punishment that would leave others breaking apart, much less having the straps stay on.

To be fair to Pelican (since so many people seem to like them) I went to their site and checked the new cases. Apparently they have redesigned the snaps - they're 2 position now (they used to be a bitch to unsnap after being closed a while) and more recessed into the reinforcing structure of the case design to make them less vulnerable. Which is good..

So, I should retract my above statements since they (Pelican) have obviously done some R&D in response to customer complaints (mine included)..

I still prefer my trusty old Haliburton though... But I'll probably buy a custom built Pelican for the 500 if it's well designed and doesn't have that pluck foam...

I still prefer my trusty old Haliburton though...

To each his own, but the abuse I've seen Pelicans take would leave any Zero-Haliburton full of deep dents and would more than likely render the case unusable. Not to mention they're not water-tight enclosures, only "moisture resistant...". That's a huge difference if you're moving equipment to-and-from a rain-drenched location.

Back to the original question.

Darrin, either of those 2 cases will suit you fine, when i borrowed an hpx from panny nz it came in the Kata CCC-1 Case which they actually dubbed the Varicam case.

Both the CC-3 or the TCCT should work fine as they are roughly the same size if not larger than the CCC-1.

Personally i like soft cases' better for Pro shoulder mounts and tend to only put smaller hand held cams in hardcases, which tend to be Storm cases over Pelicans.. i find the storms build to be much better.

There's a reason Pelican has become the de-facto standard for mobile equipment protection from individual shooters to rental and grip houses and ENG crews worldwide. Check them out before you spend your money.

Well, not world wide, here in the Netherlands and Belgium you get your camera "de-facto" in a Portabrace or Kata bag if you rent one.

As Robert says, to each his own...

To me, a hard case is for long storage and a potentially rough transport environment when the gear is out of my hands (airline luggage, helicopter, Land Cruiser). A hard case involves dissassembly - remove the matte box, the lens, the viewfinder and nestle the pieces in shape-cut stiff foam with at least 2 inches between them. And I personally like the Haliburton because it ISN'T completely waterproof - you haven't lived until you've opened a hermetically sealed case in a humid environment after travelling from a temperate one and watched the lens fill with condensation. But, again, to each his own - just be sure to learn how to properly use the relief valve in a Pelican-type case.

Generally I think of soft cases as work cases.. Open the top, pull out the camera, slap on a battery and you're ready to go... Although, as I said, I usually pack a dissassembled camera in a "soft" PortaBrace Carry-On, I send the larger CineBag through luggage with non-breakable items like fishpole, battery chargers etc, and transfer the camera to that case when I arrive. I haven't used the Kata bags, but I hear good things about them.

There are advantages to each, and in the end the choice is really dictated by personal work preferences....

I have a Pelican case for my HVX200 and like it a lot. Problem is that I am a relatively small guy and can honestly just barely carry the case up stairs without pulling out my back. I also want to carry the HPX500 with lens and viewfinder connected. I only have one lens and wont be able to afford another one for a while and I need to show up at my shoot and be ready to go. Right now my third garage is my storage area for all of my equipment and my upstairs office is where I keep my expensive equipment. I looked at a Pelican case that would carry the 500 in one piece and I would never be able to carry it up to my office.

I ended up ordering a Kata case MCC-2 and the trolly. I should get both tomorrow, I will let you know my thoughts once I get it.

I am looking at the following Kata case. What do you think?


http://www.kata-bags.com/Item.asp?pid=290&cid=5&perentId=1&ProdLine=1


I have the Canon 20x HD Lens and I want to transport with the lens and viewfinder connected.

Maybe this case would be better?

http://www.kata-bags.com/Item.asp?pid=6&cid=5&perentId=1&ProdLine=1


Any other suggestions?

Darrin,

I’m borrowing the HD10 and CC1(new version with trolly slit) and CC1 is little tight side ways, so some rubber caps and the viewfinder eyecap hit the zippers and come off some times. Basically fine though. HD10 is made for vaircam, so it is a lot larger. Nice case but I want the trolly slit. Was CC2 smaller than CC1? If it is, you might have some trouble fitting.

Darrin,

I’m borrowing the HD10 and CC1(new version with trolly slit) and CC1 is little tight side ways, so some rubber caps and the viewfinder eyecap hit the zippers and come off some times. Basically fine though. HD10 is made for vaircam, so it is a lot larger. Nice case but I want the trolly slit. Was CC2 smaller than CC1? If it is, you might have some trouble fitting.

Got CC2 today, not wide enough, its going back to B&H. I am just going to give up and buy the Pelican 1660. Its a monster of a case but I will for sure be able to transport the HPX500, lens, and viewfinder in one piece.

I think the CC1 and 2 are about the same width. I just dont want to have to remove the viewfinder to transport, Im a little anal I know but I just think plugging in the viewfinder three four times a week and carry in such a tight fitting case is going to be a problem. I have too much money invested in this camera for that.

The Kata bag is nice and solid, its just not wide enough. I dont see the HD10 listed on Kata's site, is that a Kata bag?

Thanks for your info.

Darrin

Hmm appaears i was wrong, Guess i got the CCC-1 and the HD10 confused, Sorry about that Darrin, i hope you find what your looking for.

Joe

I don't know if this thread is still active, but the Pelican 1660 is such a monster case it's almost impossible to transport. I bought one for Steadicam gear a couple of years ago and discovered it wouldn't even fit into the trunk (boot, for some of you) of the car. I sold it on immediately, unused.

I highly recommend the slightly smaller Storm Case - model 2975 (I have two for transporting camera gear). It's excellent quality, holds a ton and is still very portable. Cheaper than the Pelican too. It should fit your HPX500 with accessories attached. Zacuto use them for their equipment cases and you can see them on ther website, with custom foam for HVX and other cameras (no HPX500 cutouts yet, but they'll probably do them).

Best,

Simon.

Pelican or flight case for shipping or checking as luggage on flights.

Porta-Brace for carrying-on, or taking in your car to a local job.

I have a collection of both now, as do most working professionals.

Nate, do you know of a soft case that will accomodate a shoulder mount camera with matte box attached? I can't see anything in the PortaBrace line that is wide enough.

Best,
Simon.

Kata makes some stuff that big, but then it's pushing carry-on limits. The one I've seen is long enough for a Varicam or 730A/F900 w/wide angle lens. That is, very long, very wide.

I have to put my mattebox in my AKS for any sort of travel.

In addition to Pelican and Stormcase hard cases, there's also a new case from Italy under the brand HPRC. It has all the standard military grade certifications for durability, and it's 10%- 20% lighter than Pelican. Of course, it's still a hard case, so it's going to be heavier than a Portabrace soft bag.

One other option is to buy the HPRC hard case with removable Portabrace soft bags inside. Ship the heavy version, carry the light.

See the Portabrace "combination case" option at the bottom right of the page.

http://hprc-usa.com/2700w.htm

That link is to the HPRC 2700W wheeled case, similar in size to the Pelican 1610.

It's always good to have new options. Thanks for letting me share...