A customer of ours has brought us his Panasonic AJ-PCS060 hard drive recorder that was formatted for use on the Mac/OSX10. He asked if we could reformat for NTSC, but it's giving us some headache. I didn't notice anything in the manual for step by step reformatting, and conventional methods of hanging it off an XP machine aren't working.

Any tips or links would be appreciated.

Thanks!

Daniel,

To set up the P2 Store for PC operation, hold in both "Status" buttons and the "Cancel" button at the same time until the USB LED turns green.

To format the internal HDD, use an ink pen or another sharp object and depress the small button in the hole located under the "Format" printing for two seconds or more. The "Copy Status" LEDs will blink orange until formatting is complete.

I hope this helps you out.

Best regards,

Andrew Hoffman
Senior Operations Manager
Specialized Communications Corp.
20940 Twin Springs Dr.
Smithsburg, MD 21783-1510 USA
800-359-1858
301-790-0103
Fax: 301-790-0173
andrewh@spec-comm.com
www.spec-comm.com