Shawn Alyasiri
March 16th, 2007, 07:53 AM
I recently upgraded my FS100 to the v3 firmware, which provides 720 pN recording support. I tested it with the HVX200 and was surprised to find that you need to run the HVX in 'non-native' mode to record in 'native' pN recording mode on the FS100. That is, you can get extended pN recording times on the FS100, but you have to be in 24p/30p (non-native) modes on the HVX - which of course eats P2 cards up (with what I understand is just extra pulldown data). I typically record to both p2 and the FS100 as assurance/backup, especially for events, etc.
I've been very excited about the HPX2000 coming out (trying to pre-reserve 2 units, etc). Recent confirmation of the pN firmware upgrade coming only sweetens the deal. I'm now wondering (and perhaps begging) if that upgrade could also include the capability to stream a pN signal over the firewire port? Then you could record 24/30pN on the FS100 and in 24/30pN on the P2 cards simultaneously - eating/maximizing the same amount of data - truly win win... Could such a firmware upgrade exist for the HVX as well? Also - can/will the HPX2000 be compatable for recording into Edius and/or DVRackHD over firewire? I thought I had trouble plugging my SPX800 straight into Edius for example, where the HVX200 was fine.
Believe me - I love the new/extra recording capacity - but there is a trade-off & cost, especially if you're eating more data on P2 cards having to set a camera to the 24p/30p modes.
As I recall, this was the same situation when trying to record to DVRackHD & straight into Edius - they'd see the 24p/30p (non-native over 60) signals, but not the pN stream over firewire. I assume such an upgrade would only enhance recording options with a pN stream to other utilities over firewire (field recording into DVRackHD and/or Edius).
Recent rumors of the HPX3000 mentioned D5 quality over firewire. I'm just wondering if a current pN option over firewire could exist?... It would simply be 'sweet'.
Thanks again very much,
Shawn
I've been very excited about the HPX2000 coming out (trying to pre-reserve 2 units, etc). Recent confirmation of the pN firmware upgrade coming only sweetens the deal. I'm now wondering (and perhaps begging) if that upgrade could also include the capability to stream a pN signal over the firewire port? Then you could record 24/30pN on the FS100 and in 24/30pN on the P2 cards simultaneously - eating/maximizing the same amount of data - truly win win... Could such a firmware upgrade exist for the HVX as well? Also - can/will the HPX2000 be compatable for recording into Edius and/or DVRackHD over firewire? I thought I had trouble plugging my SPX800 straight into Edius for example, where the HVX200 was fine.
Believe me - I love the new/extra recording capacity - but there is a trade-off & cost, especially if you're eating more data on P2 cards having to set a camera to the 24p/30p modes.
As I recall, this was the same situation when trying to record to DVRackHD & straight into Edius - they'd see the 24p/30p (non-native over 60) signals, but not the pN stream over firewire. I assume such an upgrade would only enhance recording options with a pN stream to other utilities over firewire (field recording into DVRackHD and/or Edius).
Recent rumors of the HPX3000 mentioned D5 quality over firewire. I'm just wondering if a current pN option over firewire could exist?... It would simply be 'sweet'.
Thanks again very much,
Shawn