View Full Version : XLR Input Covers...


Freddy J. Weinberg
February 26th, 2007, 06:06 PM
I just pulled this thing out of the box, and I can't pull off the xlr input covers.

Am I missing something?

Jason Boyce
February 26th, 2007, 07:34 PM
It's bendable plastic. They'll come off.

Jason Miller
February 26th, 2007, 08:00 PM
I just pulled this thing out of the box, and I can't pull off the xlr input covers.

Am I missing something?


when you get them off, send me one, I lost one of mine.

Andzei Matsukevits
February 27th, 2007, 12:33 AM
same here :)

luckily i almost never use them

Freddy J. Weinberg
February 28th, 2007, 04:25 PM
They come off, just a little freaked out about spending six grand on the day the stock market went in the tank.

Have a new post up about the gamma modes.

Thanks, and unfortunately I'm gonna have to keep my covers, but I'm sure someone will sell you some for way more money then they're worth.

FJ

Mike Schrengohst
February 28th, 2007, 05:41 PM
When I received my DVX I kept up with the XLR covers for awhile....
When I received the HVX I pulled the XLR covers off and threw them away....

Robert Lane
February 28th, 2007, 06:04 PM
Unless your camera is going to be a studio-only rig then it's important to keep out weather and particulates from any electrical connection into the body, so keeping tabs on all your connector covers is a good idea.

One method I've seen used to prevent losing XLR covers is to punch a small hole in one end and loop brightly colored monofilament (fishing line) through the hole and around the camera handle.

Peter Jefferson
February 28th, 2007, 06:13 PM
good call robert

ive taken my covers off my DVX's and more than likely the HVX is identical in this regard, BUT one thing i have noticed, is that the exposed screws around the camera body do have the tendency to rust.
I shoot in all kinds of environments so somethign like this was to be expected, but i didnt think it would happen after 300 odd hours..

Mike Schrengohst
March 1st, 2007, 08:12 AM
BetaCams never had those plastic covers....
went for 20 years without needing them,
they might serve a purpose but I would not
loose any sleep over not having them.