How long are the CF Cavision rods?

Hey all,

thought I'd try to sell my stuff here first (as always) :)

I picked up a couple of lights and stands for a production I was going to use them on and I never used them. I rent my stuff now so I can always use the extra cash so I'm selling two lights Mole-Richardson Junior 2k Fresnels and 2 Matthews Combo Stands (very heavy duty).

Take a look at the pictures on my site: VIEW PICTURES (www.bohoc.org/forsale/)
I'm asking $150 per light ($200 w/ shipping and paypal fees). And I'm asking $75 per stand. ($110 w/ shipping and paypal fees).

Thanks!

$400tyd.........

Guys,

I am Selling my almost new Canon XH A1. I bought it brand new few months back.

I have recorded less than 5 hours from the initial purchase. There are no dents, scratches, or any sort or mark on it. I used a bag in a smokeless environment to keep it safe.

The reason i am selling it because of lack of time and my busy daily schedule. I wanted to learn videography but didn't get enough time for it.

So, here it is - I have all original accessories and had paid $3400. Selling for only $2800.

If anyone is interested please let me know.

[Item location is in Richardson, Texas]

Thanks,

I am selling a carefully used and well kept XL2 with a couple of hundred hours of use. Just back from Canon service for checkup and back focus adjustment on stock lens. Includes extra capacity batteries and standard accessories. A few other additional accessories are available as listed. All prices are in Canadian dollars, exchange rate at time of payment. Will ship anywhere in NA if seller agrees to pay for shipping. I prefer a sale in Canada in Southern Ontario is possible.


IN CANADIAN DOLLARS
Canon XL2 $2500
Century 0.6x wide angle adapter $300
Custom fit bag holds everything plus extras $75
On camera small light $50
Circular polarizer and UV filter $30
LANC controller $70
All for $3750

Dead cat for microphone included free

SOLD ---------->Canon 16x manual lens $800


Bill of sale provided. Paypal with fees extra (around 2.5%), or cheque accepted after 2 week clearing time. Will meet halfway for inspection and transaction if within 200km of Toronto/Hamilton area.

Watched twice, low miles! $70 plus shipping (probably around $15 in NA)

what freq range...?

complete. no scratches, nothing.

Still waiting for a response, did you receive my emails?
Rick

jack, i still have not recieved an email from you. NOt sure what happened there.

E-mail sent --> 16x manual lens.

Got it -thank you

Has anyone got a Cinesaddle (full size, with car mounting kit if poss) they don't use anymore which they'd like to get rid of for cash?

price lowered to $150, any takers?

Hi Ken,

The Rods are 10-inch. long. Please let me know if you have any other questions.

Update: The Nikon lens is SOLD. The dolly and the Cavision set are still available.

Thanks!

would you ship to europe?

Doing some winter housecleaning and the following items are FS:

1 - Bogen Model 524CN Zoom Control for Canon ENG lense, little used and in excellent condition. Paid $372.95 for it in May 2007. I no longer own the JVC5000DV camera it was purchased for so that is reason for selling. It is a great zoom control. Will sell for $190. Similar to one shown below, but for Canon lense only:

Bogen / Manfrotto | 524CFI Lens Remote Control | 524CFI | B&H (http://www.bhphotovideo.com/c/product/487743-REG/Bogen_Manfrotto_524CFI_524CFI_Lens_Remote_Control.html#features)



1 - Sony MZ-N10 High Speed MiniDisc Walkman Recorder. Bought new in January 2004 for $245. Used very little and is in excellent condition with all accessories. Asking $120.



email interest to: tom@lakepointfilms.com

I have a Power Mac for sale with the following specs:
Power Mac Dual Processor 1.8ghz
1.5Gb's of Ram
160GB Hard-drive
PCI-X slots
Airport Extreme Antenna
OS X 10.4
(Stock) Dual DVI Graphics Card.
Feel Free to make offers.

Topping this after...10 months??? It never sold and I kind of forgot about it. Make me an offer.

I am in search of my third GS400. The two that I have are unbelievably clean with very low hours. I want my third to be the same. I would consider a GS500 if an unreal deal were to come along, but would greatly prefer another GS400.

Hello Everybody...I am trying to sell a brand new (never been used, & still in original packaging)....PIONEER BLUE RAY BURNER (INTERNAL).

I bought it 5 months ago, & never used it. I paid close to $500 for it, am asking $450 or
best offer.


Email me with any questions: peternvaughn@gmail.com


Pete in Michigan

https://pantherfile.uwm.edu/dacole/public/Camera/Batteries.JPG

https://pantherfile.uwm.edu/dacole/public/Camera/Wide%20Angle.JPG

https://pantherfile.uwm.edu/dacole/public/Camera/Camera%202.JPG

https://pantherfile.uwm.edu/dacole/public/Camera/Camera%203.JPG

https://pantherfile.uwm.edu/dacole/public/Camera/Camera.JPG

https://pantherfile.uwm.edu/dacole/public/Camera/Filters.JPG

https://pantherfile.uwm.edu/dacole/public/Camera/fisheye.JPG

https://pantherfile.uwm.edu/dacole/public/Camera/Light.JPG

Quick bump. I'll keep it here for a couple more days. Then I'll try ebay maybe. I know these might be a bit overkill for the DV realm.

Dang, I've got one 2k and a combo stand and could use a couple more, but just can't swing it right now. Best of luck with your sale man.

Best offer........?

That looks too good to pass up, Adam. Who cares what they look like as long as they work, and I've been wanting some sturdy gear. I'll have to think hard about whether or not I can take the whole deal off your hands but would like to buy one light and stand for sure.

Email is on its way...

Adam, I'm not sure how I missed this, but i am interested as well. Since you're local, I can avoid the shipping fees. But of course, Lorinda has dibs since she responded first.

-gb-

Sorry about the late response. I'm sending replies via email right now.

I should probably note that these are not edison type plugs. That's probably why I never used them because I'm a big procrastinator and I never got around to putting an edison plug on there. I did talk to Mole-Richardson about it and it's pretty easy to convert them if you need to.

would you sell just the pod? I already have a 2000

I have one but the belt part that snaps together broke. I have been meaning to go get a replacement as they are dirt cheap @ stores like Michael's. All the other parts how ever are in great working order.

I'm interested in the combo stands as well. Please let me know if it's still available. Thanks!

Both lights and stands are spoken for but if anything falls through (which I'm pretty sure it wont) I'll post. For now though - the lights and stands are sold.

Thanks everyone.

Max, do you still have the smooth shooter?

havent heard back from you Cesar...

I would also like to know if it's still available Hugh.
I sent you email.

This is sitting gathering dust so it is time to let it go. Very nice condition. 4 input sources can be routed on the matrix to any 4 outputs. 2 rack units high.

This lists for $1,740 and retails for $1300. Asking $300. Photos and specs available but info is available on the Knox website or email me for photos.

Knox Video Products - RS4x4HB (http://www.knoxvideo.com/Products/kv_RS4x4.asp)

Great shape - great product. Shot 2 projects and don't need it anymore. In great shape. It has the rotating glass disc, not the oscillating one. Comes with battery.

In addition to the mini35, I also have a 25-250mm t2.2 Angenieux zoom lens as well as a Schneider set of primes all arri mount. I don't have an arri to PL adapter, nor the PL mount for the unit.
Email for details if interested.

150us$ shipped from Barcelona. As low as it gets for me to get my lazy ass to the post office.

I got involved in a project that I needed this camera for and had to postpone selling it. I'm now ready to relist it with everything above minus the storm case for $3200 + shipping and half the paypal fee if you choose to pay that way.

I also got the viewfinder upgraded at the JVC service center in Aurora IL. This update involved strengthening its internals and replacing two of the plastic pieces of the viewfinder with stronger, better reinforced ones. This eliminated the weak point on the viewfinder which has plagued almost everyone I know who's owned the HD100 series cams.

Right now the hours on the heads sit at exactly 200.

As for the extra batteries that I'm including. One is the original battery that came with the camera and is 2800mAh. The other two are 3500mAh and last a bit longer.

Selling within the Continental US only.

Mary, did you receive my emails? If not, please contact me via the forum or sbloombaum a-t yahoo.

***bump***

Invoice sent

I have one but the belt part that snaps together broke. I have been meaning to go get a replacement as they are dirt cheap @ stores like Michael's. All the other parts how ever are in great working order.

Great! What are you asking for it? Would you accept paypal? and please include shipping costs.

After one use, I'm selling an Indie-Dolly and 12 feet of straight track--like new, in perfect condition!

Includes two cases, one for the dolly and one for the track sections (4 sections, 3 feet long each).

Price: $1,500.00 plus shipping (lower 49 states only).

If interested, e-mail me: jay [at] gooddogproductions [dot] com

Thanks!

I think I sent you an email via craigslist about this.

I need to get rid of my camera first. If its still for sale when someone buy mine. I will be down for sure.


I could trade you my camera and cash.

http://www.dvinfo.net/conf/private-classifieds/136585-sony-hvr-a1u-extras.html

It's been SOLD friends!

comes with new steadicam tripod in bag.

Not interested in the camera since I have one, but how much did it cost you to upgrade the viewfinder at the Chicago Service Center?

Thanks,

Daniel Weber

I’m going out of business and selling everything. There are four XL2 packages, one GL2 package, a 3x lens, a 1.6x converter, a Sennheiser audio package, a Dell edit station, and two battery packs. These are good prices – and there is nothing wrong with this equipment. The equipment was purchased new between May 2006 and August 2007. The PC came preloaded with Adobe from Dell. The equipment is located in upstate South Carolina. I would like to sell everything at once and would be willing to meet on the eastern seaboard for sale of everything. Individual item prices do not include shipping. Shipping charge will be whatever the UPS store charges. Pictures and details are available at my website .

Visceral Video - XL2 (http://visceralvideo.com/xl2.html)

I can be reached at

mconn@visceralvideo.com