Ok people, let's try this...

$400 for the entire PAG C6 package, including shipping.
That's at least half off of the original price of the entire package.

Picture are available, but haven't had time to shoot them yet, as I'm preparing for a shoot this weekend.

E-mail sent.

***Item has been sold***

I used it on one shoot - an informational video for a chiropractic office. It was perfect. I had it on a Bogen 3066 head as the entire setup was heavy (including the JVC DV5000 cam I had at the time).

We had a dedicated operator for the prompter - running the software from a laptop. If you are doing static shots (evening news style) I suppose it wouldn't be too difficult to just lock down your camera shot, hit record, then run the prompter yourself.

The doctor we were shooting had not read from a teleprompter before so we went through a few takes before the "flow" of his reading was just right. We did find ourselves needing to adjust the speed of the scroll often so that what he was reading was always at the center line of the reflector (looking directly into the lens and not above/below it).

Lastly, the further away we could position the prompter/camera from the speaker, the better. This is simply because the left to right eye movements of reading are more noticeable at closer distance. So, move your tripod back and zoom in.

Thanks for your interest!

-Dave

Time for a tripod clear-out! I will accept Paypal (or a cheque, at a pinch). UK only. Shipping is extra, and at cost - probably via Parcelforce, it's all I have access to.

Libec LS-37

- Mid range tripod. Predecessor to the LS-38.
- 75mm ball leveller
- Single stage legs
- Spirit level
- Payload 4kg-8kg
- Bag
- Comes with ground level spreader
- Also with mid-level spreader for additional stability or for rough ground.

Comments:
Suitable for larger camcorders. Can be used for Sony V1/Z1 or Canon A1 at a pinch, though counterbalance spring is a bit strong for these cams. Really nice fluid action head. Legs are pretty sturdy for the price. Well looked after, this has only been used on a few filming trips.

Photo: http://www.mikeb.org.uk/4sale/ls37.jpg

Price new: approx £400, add-on mid level spreader £40
Asking price: £150


Libec TH-950DV

- Lightweight tripod
- 75mm ball leveller
- adjustable counterbalance (off/front heavy/back heavy)
- Two stage legs, mid-level spreader
- Spirit level
- Max payload 4kg
- Bag

Comments:
Would suit small camcorder, nothing bigger than a Canon XM2 or Sony VX2100e or Sony A1. Nice fluid action from head. Legs not the best - but that's what these are like from new. I've reflected that in the price. Rarely used.

Photo: http://www.mikeb.org.uk/4sale/th950.jpg

Price new: approx £200
Asking price: £50


Vinten Pro-6HDV

- Excellent lower-end pro tripod
- Vinten Poziloc tripod legs
- Ground level spreader
- Black aluminium alloy two-stage legs
- Pro6-HDV head based on Manfrotto 503HDV model.
- Adjustable drag and tilt
- 3 step counterbalance, plus zero
- 75mm ball leveller
- Illuminating Spirit level
- Payload approx 6kg
- Excellent Vinten-badged Petrol-made bag with good shoulder strap.

Comments:
A bit heavy - 7kg in total approx, but very solid. Ideally suited to someone who does event video rather than someone like me who hikes across country. Legs are really good, genuine Vinten poziloc legs identical to those in the Vision range

Head is great for the money. Bear in mind that it's not a £1500 Sachtler or Vinten Vision.

See Nigel's DV User review: http://www.dvuser.co.uk/content.php?CID=184

Well looked after. Only used on approx 6 field trips, other than around the house practicing.

Photo: http://www.mikeb.org.uk/4sale/pro6.jpg

Price new: approx £600.
Asking price: £300.

Email inquiry sent on items 4 and 8. Thanks!

Email sent for Red Eye.
Thanks for your time.

In good working and cosmetic condition, with original box and accessories if possible.

Hi Michael,

I am interested... could you send pictures to me.

Thanks,
Eric

Hi Michael,

I am interested... could you send pictures to me.

Thanks,
Eric
I'll try to take some pictures tonight and post them online for you.

My business has had to make the move to HD so I have (3) different Canon GL2 videocameras for sale in (3) different packages. I'm listed the packages as "A", "B" and "C" to make things easier. All cameras/accessories have been treated with kid gloves over the course of their use and have no scratches on the original lenses (UV filters were placed on all cameras upon purchase and left on during use) and virtually no marks on the bodies.



Canon GL2 Package "A" -- $1,400
- Canon GL2 videocamera
- original cables (AV, S-video, USB)
- original remote control
- original shoulder strap
- standard and large viewfinder eyepiece cups
- original battery charger with AC cord and camera power adapter
- original BP-915 battery (approx. 1hr with viewfinder use)
- Lenmar LIC941 battery (approx. 7-8hrs with viewfinder use)
- Sunpack UV filter
- Sunpack circular polarizer filter
- Canon DM-50 shotgun microphone
- Canon WD-58 wide angle lens (.7) with lens hood
- Hakuba aluminum hard case

NOTES: Nothing to report. Everything works perfectly.




Canon GL2 Package "B" -- $1,200
- Canon GL2 videocamera
- original cables (AV, S-video, USB)
- original remote control
- original shoulder strap
- standard and large viewfinder eyepiece cups
- original battery charger with AC cord and camera power adapter
- original BP-915 battery (approx. 1hr with viewfinder use)
- Lenmar LIC941 battery (approx. 7-8hrs with viewfinder use)
- Sunpack UV filter
- Sunpack circular polarizer filter
- Canon WD-58 wide angle lens (.7) with lens hood
- Hakuba aluminum hard case

NOTES: The lens hood for the WD-58 was cracked on a shoot, but was repaired with adhesive and hasn't presented any issue since. Also, on 2 or 3 random occasions I've had the zoom rocker work more slowly than normal. This doesn't seem to be an issue, though, and may have been heat related? Not sure, but on each occasion it was outside at a wedding on a hot day. Finally, there is a speck of dirt inside the viewfinder that I can't seem to get out. It's in the viewfinder, so it doesn't show up on video, but it seems to be inside the viewfinder. It's not big, but it's there.




Canon GL2 Package "C" -- $600
- Canon GL2 videocamera
- original cables (AV, S-video, USB)
- original remote control
- original shoulder strap
- standard and large viewfinder eyepiece cups
- original battery charger with AC cord and camera power adapter
- original BP-915 battery (approx. 1hr with viewfinder use)
- Lenmar LIC941 battery (approx. 7-8hrs with viewfinder use)
- Sunpack UV filter
- Sunpack circular polarizer filter
- Hakuba aluminum hard case

NOTES: This camera began displaying a strange pixelization issue one month after the manufacturer's 1-year warranty ended. What happens is sometimes in the shadows and sometimes (not as often) in the mids you get some pixelization in the video image. In most shooting situations (decent lighting) the issue doesn't seem to appear at all, and in situations where it does (generally darker lighting) I've found I could make some adjustments in post to minimize it's appearance. I have noticed that it seems to be more of an issue when the camera is zoomed in. At full wide there isn't much of an issue in decent light. This issue is such a minor one that I haven't bothered to send the camera in and have it fixed, since it was only used as a wide-shot camera for wedding ceremonies. As such, this camera has also seen less recording use, since it is only used for the 15-20 minute ceremonies that I shoot. I have used it as a capture deck, which increased it's overall use, but I shoot a limited number of weddings, so it has maybe captured 75-100 tapes total. I have had 3 tapes experience tangles (fixable) on rewind, but I don't know if this was a tape issue or a camera issue since all 3 times were spread out and the capture conditions are always exactly the same. I can send a screenshot from a recent wedding to show the video quality from this camera. To be honest I don't think the pixelization is even noticeable and my clients have never said anything. Still, because the camera is not in perfect working condition I'm selling it for much less than the others.


SHIPMENT: Shipping costs will be determined once a buyer has been identified.


PAYMENT: I can setup an online payment for a credit card transaction once a buyer has been identified.


FINAL NOTES: These cameras are selling for $1,500+ at B&H for USED models without any accessories or a transport case. I have been totally up front with EVERYTHING regarding the working and visual condition of the cameras/accessories/cases, but once these items leave my hands the sale will be considered "as is" to protect myself from potential buyer misuse, etc. If you are serious about a purchase, please contact me via email: info@dreambigproductions.com


I can send images of any of the packages by email to anyone interested. Thanks!!

afternoon bumperoo

E-mail/message sent.

Avid Express Pro full version with box and 3rd party applications only 699 with dongle.
Less than 7 months old paid 1995. You can even upgrade to to the full version of Avid Media Composer for only 499.00 . Thats a 2000.00 savings . I only use FCP and thats why I am selling it .

http://store.avid.com/us/index.cfm?page=templates/product_grp_index&categoryid=51

Doug

Dave I just sent you a reply.

thanks,
Bryan

I’m also adding a polarizing filter, and knocking the price down another 100 bucks for each item.

This a lot of kit for the price!

For Sale: JVC GY HD100U-A Shooting Package.

WHAT YOU GET: REVISED ZOOM CONTROLLER AND GLOVE NOW PART OF THE MAIN PACKAGE

1. Camera: JVC GY HD100U-A With 72 Drum Hours, Includes: Body, Viewfinder, And Earpiece, Hd100 Battery Charger & Ac Power Adapter, Stock Hd100 Battery (never Been Used), Stock Mic, HD100 Instruction Manual, Hd100 Original Box. 16x Fujinon Stock Lens W/ Lens Hood & Cap, Fujinon Lens Manual
2. Hoya Uv Filter
3. Anton Bauer Tandem-70 On-camera Ac Adapter And Single Position Battery Charger. $545 New
4. 1 Anton Bauer Dionic 90 Battery 3+ HRS $400 New
5. 1 -ab-qr-jvc714hdv Gold Mount Adapter Plate $150 New
6. Another Spare Ab-qr-jvc714hdv Gold Mount Adapter Plate $150 New / My $60
7. POLARIZING FILTER
8. Anton Bauer Abwmk-hd100 Firestore Mounting Plate $55 New / My $20
9. KA551U Tripod Adapter Plate For Jvc Gy-hd100u Camcorder $279.95 New / My $175
10. Porta Brace Ctc-2 Traveler Camera Case (blue) With Camera Rain Cover $289 New / My $150
11. Kata DVG-54 Camcorder Glove For Jvc GY-HD100/110/200/250 $149 New / My $100
12. Jvc Hz-zs13u Rear Servo Zoom Control For Canon And Fujinon Lenses $650 New / My $450

Base Package Asking Price now $3300


TRIPOD

12. Sachtler DV2 Tripod With 75mm Ball Leveling Fluid Head, With Soft Case & Extra Plate $1000 New / My $600 STILL ON HOLD.

JVC BR-HD50 VTR REVISED: lowered price – ANOTHER $100

To Round Out This Jvc Shooting Package: A Near Mint, JVC-HD-BR50U VTR, Fw 1.8. Currently 99 Drum Hours, Maybe A Few More As I Will Be Using It Untill I Move It. Works Great. A Must Have To Keep Your Camera Heads From Excessive Wear And Tear, Or If You Have Blown Your Firewire. $2650 New / My $2000


Camera, Ab Kit, Petrol Bag, Zoom Controller, Camera Glove: $3300

Jvc Vtr $2000


I would prefer to sell the Main Camera Package as one group (1-11) and have priced it as such. Or individual items can be bought for the MY price

I want to move this package. I think I have set some reasonable prices, but I’m still willing to take offers.

Make Me an Offer
Contact Me And We Can Workout A Deal.

shelleyfilmfactory@mac.com


Shipping To Be Paid By Buyer. Whole package est: $50 for fedex ground.
You Pick Shipper. I’ll Get The Estimate From The Shipper When We Figure Out What You Want To Buy. Actual Price (I Don’t Believe In Charging Extra To Box It Up And Drive To The Shipping Office). Tracking Number Will Be Emailed To You Right After Shipping. Insurance Should Be A Must. I Will Not Ship Cod Or Until Payment Has Cleared.

I've been asked for some photos, so here they are.

http://www.frozen-in-time.net/glidecamimages/CRW_4082.jpg

http://www.frozen-in-time.net/glidecamimages/CRW_4083.jpg

http://www.frozen-in-time.net/glidecamimages/CRW_4084.jpg

http://www.frozen-in-time.net/glidecamimages/CRW_4085.jpg

http://www.frozen-in-time.net/glidecamimages/CRW_4086.jpg

http://www.frozen-in-time.net/glidecamimages/CRW_4087.jpg

http://www.frozen-in-time.net/glidecamimages/CRW_4088.jpg

The last photo shows all the extra weights, screws, washers, bolts and thumb-screws which are not already attached to the Glidecam.

Canon HV20--High Definition Camcorder
This camcorder is in mint condition, I have used it less than 10 hrs. Includes all the original Items. (Canon battery, battery charger, all cables, instruction book, box,etc.

Plus
1 Impact #IMBP2L14 1500 mAh Battery
1 Impact#IMNB2L22 2400 mAh Battery
1 Raynox # 0.66x 52mm Wide Angle High Definition Conversion Lens with 52-43 step down ring.
1 Canon lens hood 72mm for The Raynox
1 72mm Hoya UV Filter
1 72mm Polarizing Filter

Everything in mint condition, looks Brand New!! $675.00 for all Plus Shipping

Bob Trimmer
Medford OR
Phone 541-773-7841
bdtrimmer@clearwire.net

Here are some pics of the PAG C6 light kit for sale.
$400 including shipping.

http://lvproductions.net/PAG/PAG04.jpghttp://lvproductions.net/PAG/PAG01.jpg
http://lvproductions.net/PAG/PAG02.jpghttp://lvproductions.net/PAG/PAG03.jpg

BTW I forgot to mention that there are 2 additional bulbs included, an extra 20 and 30 watt bulb.

I'm trying to sell the whole lot to upgrade to the Sony EX-3.

Here is what I have for sale for a package or separate:

(2) Canon XH-A1 HDV $2650 each.

Cameras include 1 Canon 950-G battery (per camera) + original accessories in original boxes and manuals. Cameras are in great condition and have been well taken care of.


Additional accesories for sale:
Canon WD-H72 .8x wide angle lens: $285
Canon VL-10iII on Camera Video Light $55
(Used Once) Porta Brace Rain Slicker (2): $130 each
Multi purpose Camera bag: $50
2 Lenmar BP-945 Equiv. batteries $40 each
Canon BP-945 Battery: $65
Manfrottto 501 head (used 3 times) $120
Nebtek Neb70HD High Def on-cam monitor in excellent condition and latest firmware: $1550

Let me know if you have any further questions.

Location, 1 hour from Sacramento in the foothills, California- Cash/Paypal accepted.
Local Pickup ok. Shipping not included.
email inquiries: larry@tlhvideosound.com

I am looking to purchase a used boom pole for a couple of upcoming projects and the offerings on Ebay are slim. Looking for 8'-12' pole, aluminum OK, in decent shape. Anyone out there have one they are looking to part with?

Thanks!

I'm serious if you two don't see eye to eye.

You said you would meet and didn't. Who you were meeting is irrelevant whether it was me in person, my boss or a delivery guy. I understand if you were on set and couldn't call immediately-fine, but you never called back, not later that evening, not the next day. Nor did you say that you were going to be on set, you said you would be around and available.

When I say I am going to meet someone, I do. If I can't, I call. It is really quite simple, all it would have taken is a returned call.

Martin I am glad your transaction went smoothly.

Not a bad deal!

E-mail sent.

We have 48 BCT-40SR HDCAM SR tapes left over from a series pilot. (40 minutes at 60i, 50 minutes at 24p.)

Would happily sell all at once at discounted rate. Please make us an offer.
We'll also consider smaller requests (preferably multiples of 10.)

Tapes are located at a production office in Toronto, ON, Canada. Local pickup OK.
Shipping at buyer's expense.

Please email (tapes@timdashwood.com) or PM (http://www.dvinfo.net/conf/sendmessage.php?do=mailmember&u=19060) me.

Looking for a Bogen Manfrotto 501 HDV head. I'd even be interested in a broken head as long as it will securely hold the camera. Tilt function desired, pan function not needed. Control arm also not needed. All that to say, if it doesn't pan anymore, that's okay. If the control arm is snapped off, that's okay. It just needs to tilt and securely hold a camera.

Looking to buy as cheaply as possible. I'd be willing to pay up to $60 for a fully operational head and up to $30 for a broken head, depending on what's wrong with it. Quick release plate not needed, but it'd be nice if you had that too and I'd pay up to $10 more for it.

An older model head is acceptible, as long as the new 501HDV quick release plate will fit.

Mic system arrived in good condition. And it works as promised.

Red Eye pending...

Price drop to $8350 without shipping.

Sale pending on Pro-6.

LS-37 and TH-950 are still available.

I am lowering the price to $600.00 plus shipping on the above items.

Bob Trimmer
bdtrimmer@clearwire.net
541-773-7841

A couple more items for the virtual garage sale. I will accept Paypal (or a cheque, at a pinch). Prefer UK only. Shipping is extra, and at cost - Royal Mail, ParcelForce or FedEx depending on destination and size/weight.

Rode 3m aluminium boom pole

- Extends to 3m
- Collapsed length approx 0.8m.
- Padded lower section for comfort
- Cable can be passed up the middle of the boom.
- Comes with two velcro straps to manage external cable.

Comments:
Reasonably lightweight, given that it is aluminimum and not carbon fibre.

Please note! This is slightly "butchered" - see photo. I cut out a small notch so I could get my XLR cable to actually go through the end. The only other way was to cut the end off the cable. It looks a little bit rough, but the edges are smooth and you won't cut yourself. Everything else about the boom is perfect.

I know, if I was doing it again I'd cut the cable and re-solder. But that's too late now!

Price new: approx £60
Asking price: £20

Photo: http://www.mikeb.org.uk/4sale/boom.jpg


Kata CC193 camera bag

- Armoured ends
- Heavy duty handle and shoulder strap
- Bright yellow interior with modi-vers internal dividers (velcro, a djustable)
- Side pocket for tapes and other bits and pieces
- Double zip, velcro and catch to secure camera compartment
- Adjustables strap to anchor camera inside bag

Comments:
I used this with my VX2100 and then my V1. Excellent bag from Kata. I only upgraded because I needed something bigger when I bought more bits and pieces.

See photos for usage with V1. Main compartment is angled so my mic and camera fit, this can be adjusted - it's all movable velcro.

In my configuration, I have space for the Sony wide angle lens at the front, batteries and Lanc controller at the rear, and rain jacket along the side pocket. I put tapes, cleaning cloths and cables in the front pocket.

It's in good condition, no obvious marks or scuffs. I even hoovered it out to remove all the hairs off my Rycote softies!

Price new: £85-£100.
Asking price: £35.

Photo: http://www.mikeb.org.uk/4sale/bag.jpg

Arm and vest only. You'll need a Glidecam 2000 or 4000 to complete the system. I'm going to try to sell in Canada first as I'd like to avoid shipping something like this internationally. Feel free to make an offer though. Let's see how it goes. Asking $1250CDN OBO.

Pics here:
http://img401.imageshack.us/img401/9196/ss1sh9.jpg
http://img227.imageshack.us/img227/5470/ss2rg4.jpg
http://img246.imageshack.us/img246/205/ss3zz3.jpg
http://img68.imageshack.us/img68/8034/ss4rx3.jpg

For Sale:

Marshall V-R70P-HDA 7" LCD Monitor for HD/SD Field Production with V-Type Battery Mount, Component, S-Video and Composite Inputs and Outputs.

Works perfectly, no issues. It has a couple years of use on it and has some very small scuffs in its finish.

Includes 4-pin AC power cord.

$950 via PayPal. We'll pay shipping.

Photos here:

http://s351.photobucket.com/albums/q442/oatmealvid/marshall/

Contact:

erik@handcrankfilms.com

Mic has been sold. Thank you.

Wide angle lens is sold.
1 Rain Slicker is sold.
501 head is sold.
Light is sold.

Cameras are still for sale.

I can let both Canon XH-A1's go for $5200 (I have to consider paypal fees).

The Glidecam 4000 Pro is sold.

Thanks Ryan for a painless transaction. Enjoy flying your camera.

SOLD (to me)

Incredibly smooth and professional transaction. Camera was exactly as described. Thanks!

Hello

Can you give the hours of use for the X1's?

Thanks

Both cameras are sold.

Any takers on the Nebtek 70Hd monitor? I REALLY want the PMW-EX3!

I'm going on a trip to the Canadian woods until next Monday, and will be unable to reply to emails.

please leave your offers and I will get back to you on Tuesday Aug, 5th.

Thanks,

Bryan

I might be interested in the other Rain Slicker. Which type is it?
Are you willing to ship to the netherlands? If yes, how much extra?

345$us (220€).

Sold!
Thank You.

Red Eye wide-angle sold.

Only 36 hours on the camera. Most of which is me fiddling with settings and doing a few hours long time lapses.

Boom pole sold!

Bag still available.