Hi Jason,

I have uploaded more photos onto Flickr. Please take a look.

You can see what are included by visiting the offical webpage. I am selling my MultiRigPro package. http://dvmultirig.com/id7.html

You can mount your receiver on one of the hot shoe adaptors. See my photos.

Hi there,


I'm selling quite some stuff for my Canon XH-A1, all in original packaging, everything is clean and undamaged of course, and hardly used. These items are a must go!


1/ Century wide-angle adapter (century pro series HD .6X WIDE ANGLE ADAPT HD CANON) with expensive 102mm clear glass Schneider filter
stock code 0HD-06WA-XLH

http://www.schneideroptics.com/century/dv/xh-g1/xh-g1.htm

Asking 385$



2/ Redeye wide-angle adapter (72mm Red Eye™ HDV&DV
.7x Fx Series (.65x)

http://www.vfgadgets.com/RedEye.htm

Asking 315 $



3/ Complete Firestore FS4 PRO - HD unit (60 GB- PAL) with all his accessories like ;

- Focus Mount kit (hot shoe swivel mount and firestore cable)
- External FS-4 Battery charger
- Focus FS-4 High Capacity Battery (180 min.)
- Focus FS-4 standard battery (90 min.)
- Focus FS-4 Soft Carry Case (to wear the Firestore unit on your belt)
- Angled firewire cable

Check them out at http://www.focusinfo.com/webstore/catalog.asp?type=29

Asking 1195 $ (one total package - no splitting)



4/Steadicam Merlin Camera Stabilizer (without Metal Gimbal - with original plastic one) with Merlin Accessory Plate!

(Garrett Brown Limited Signature Edition MERLIN, offered in a custom store-and-carry padded case and will include a Certificate of Authenticity signed by Garrett Brown, the inventor of the Steadicam. )

http://www.bhphotovideo.com/c/product/521721-REG/Steadicam_MERLIN_Merlin_Camera_Stabilizing_System.html

Accessory plate : http://www.bhphotovideo.com/c/product/445745-REG/Merlin__Merlin_Accessory_Plate.html

(You can get the metal gimbal as an upgrade at b&h : http://www.bhphotovideo.com/c/product/422582-REG/Steadicam_801_0028_8010028_Steadicam_Replacement_Gimbal.html)


Asking 650$ (I'm upgrading to the Pilot)



You can paypal me if you want.


Respectfully!
Eugène!

Im not sure if im selling it anymore but this is a great travel tripod. Probably the best you can get if you want really light but fluid.

http://www.dvinfo.net/conf/showthread.php?t=114181

still available

Micheal,
Is this camera still for sale?
Bill

This has just SOLD. Thanks.

SOLD

Mike

I have been looking at getting one for a while and absent the ability to test one, I might just have to take the plunge to find out (no dealers near Boise that carry it).

I have a few questions....

Does this have the ability to attach to a tripod in its current state, or will I need the adapter? (I can't tell if the bracket in the plastic bag in this picture (http://www.flickr.com/photos/69688300@N00/2037176492) is the adapter or something else).

Also, I have an external VHF (unfortunately not UHF) receiver as well as (potentially) a Beachtek. Can the Beachtek mount between the camera (in this case my GL2) and the Multirig and still work with the tripod mount?

I'll PM this same info. Thanks.

Jack I thought that I would interject, I'm not the seller but have used the DVMulti Rig since it's release.
The tripod adapter is what's in the bag. It's a bracket that attaches to one of the grips, usually right one which folds underneath the unit when mounting on a tripod. And yes it's metal not plastic.

The units are made in Israel so you will not find any local dealers, even B&H that will carry it.

And you can use the DVMulit while still using a Beachtek, I do with my FX1 (modified with Z1U mic mount attached).
Simply attach your Beachtek like normal to the bottom of your camera. then attach the DVMulit Rig to the bottom of your Beachtek (via screw) and your set.
If you really wanted to you could atatch a QR assembly on the bottom of the DVMulti and remove quickly if needed.

But you will find that you will be using it all day long for every style of shooting. Handheld or tripod mounted.

All of the handles have 1/4 threads for any kind of mounting. But I still mount everything on my camera t leave DVMulti Rig free to switch to any position.

Jack I thought that I would interject, I'm not the seller but have used the DVMulti Rig since it's release.

......

If you really wanted to you could atatch a QR assembly on the bottom of the DVMulti and remove quickly if needed.

But you will find that you will be using it all day long for every style of shooting. Handheld or tripod mounted.

All of the handles have 1/4 threads for any kind of mounting. But I still mount everything on my camera t leave DVMulti Rig free to switch to any position.

That was going to be my next follow (quick release related) up because I do have a (somewhat low end tripod) I will be using, but figured I am still going to need mounts for my VHF receiver(s) and potentially my AT shotgun and or an emergency light (gotta love wedding receptions). I don't know how the GL2 could mount a light, mic, and VHF receivers (unless I get one of those hot shoe mounted multi-mounts)

BRAND New sealed box Final cut pro studio 2 Retail Full Version
I purchased this a few days ago and now that Macbook Pros came out I need to sell. I paid 1299.00 and again it is a sealed box . I am asking 1000

Sincerely

Doug T

That was going to be my next follow (quick release related) up because I do have a (somewhat low end tripod) I will be using, but figured I am still going to need mounts for my VHF receiver(s) and potentially my AT shotgun and or an emergency light (gotta love wedding receptions). I don't know how the GL2 could mount a light, mic, and VHF receivers (unless I get one of those hot shoe mounted multi-mounts)

Jason your QR plate goes on the adapter that attaches to the right grip.
The right grip swings in underneath the rig and folds down, which then attaches to you tripod. Again look at the pictures on the website that shows as much.
You can mount accessories such as a light on one of the handles via hotshoe (using the hot shoe adapter). Or screw the light into the handle itself, as I said there are 1/4 threads on both ends of the handle.
You receiver could mount to the back shoulder plate of the DVMulti Rig.
Since you have a GL2, then I might recommend a setup like this.
Get a mini handle bracket of some kind and attach either your light or wireless to it. Something like this:
http://www.vfgadgets.com/HDVbracket.htm

Or you could use an adapter mount of some kind on your GL2's hot shoe. Like this:
http://www.bhphotovideo.com/c/product/126229-REG/Cool_Lux_MD3000_MD_3000_Light_and_Sound.html

There are even more examples of brackets and such if desired.

But you have many options available to you for setup either with the DVMulti Rig or mounting everything on camera.

You will find that you love flying this thing.

Do you still have the GL2?

Sent you an email about an hour ago. Hopefully you got it.

Sold sorry

I am looking for an adapter that Century used to make (or similar). It was a Nikon to 2/3" (B4) bayonet adapter. It was the 1.4x device. Wondered if anyone had one they no longer needed or if any one had suggestions for an alternative. Thanks.

David

Hey Everyone,
I have 2 Sony VX2100s for sale. They come with 2 LENMAR 9hr batteries, battery chargers, and Canon WD-58 Wide angle lenses. I also have a beachtek DX4 audio adapter, and a Rode Videomic for sale. Lastly I have a Canon Elura 100 that I have been using as my capture deck.

VX2100 #1 $1500- has been in use with me for about 35 weddings. I don't know of its use before that. It has given me flawless service since then. I have used the Canon WD-58 lens on it at all times. The battery lasts me all day with absolutely no issue. This will come with a sony 3 watt light that runs off of the on board battery.
VX2100 #2 $1500 - has been in use with me since October '07 so it has seen about 5 weddings. It also been used with the Canon WD-58, and will come with the Lenmar 9hr battery as well.
I have boxes for both of these cameras, and some of the original accorries. (like I think there is a remote, etc. but I'm not sure about the component cables or the strap) Everything that is necessary is present. I have used these cameras with no issue, and have purchased Canon A1s so I will no longer be needing them.
I also have a Beachtek DX4, a Rode Videomic, and a Canon Elura 100 for sale.

I would like to get:
Beachtek - $75
Videomic - $75
Elura 100 - $175
Oh, and a Canon VL10i video light - $75
I would be willing to bundle these items as necessary and give a discount. Please e-mail me at bill@grantphotovideo.com or call 803-749-9168. I will accept paypal or cashier's check from registered members of DVinfo. Also buyer pays shipping.

bumpity bump

HD100 with low hours, used exclusively in corporate environment.. excellent condition, 16x fujinon lens with fujinon wide angle attachment, TAMRAC bag (with cutout for viewfinder), 2 JVC batteries, Tiffen Filter kit, and V-mount to accept IDX (or other v-mount) brick style batteries..

Also have JVC KA-55 tripod base to throw in!


2900. obo

david@mothfilms.net

Need either a Sony DCR-TRV22 or DCR-TRV33 miniDV video camera. No accessories or batteries are necessary, just a working camera. Please reply or send me an email johnhuebbe ( at ) hotmail ( dot) com

I forgot to mention the Merlin stabilizer comes also with a steadicam bag.

Hi Jason,

The bracket in the plastic bag is an extra. There is already one bracket mounted on one of the arms. See the photo for details http://flickr.com/photos/69688300@N00/2297213479/in/set-72157603200399920/

Bump - still available.

SOLD

Thanks

If anyone is serious I am willing to sell it for a good price it is the full retail version only 2 days old with a sealed package.

Thanks
Doug

beachtek is now sold...

Let me know the price and condition of your Digital Juice Editor Toolkit Pro you're not using. Thanks.

hoya macro kit is now sold...

Just bought an on camera light from Jim. Everything was as described and the item was shipped the day I paid with PP.

Just bought a light from Jim. Everything went great.

Thanks Jim.

I know you're looking to save money, but DJ's license explicitly states that it is non-transferable. That means used DJ products are no more legal to use than if you had burned a copy from a friend.

They're always running a special on the stuff at their website anyway.

footage shot with the cam here (some dvx in there too)

sorry for the crappy low res encode.

www.cinematicdream.com

willing to sell just the Canon WD-58?

Hey Benjamin,
I was hoping to use the WD-58 to sweeten the deal on the cameras, but send me an e-mail, and make me an offer... we'll talk.
Bill

Email sent...

I've done some research and I found this website. Is this monitor the same as the one on the website.

http://www.broadcaststore.com/store/model_detail.cfm?id=792933

Doug, can't you just return it to the store if it's unopened? You'd get all your money back...

Unless policies differ in the US, I don't know.

Sorry, double post by mistake...

Ahhh I didn't know that. Thanks for straighten me out.

Redeye wide-angle pending.

still available

actually, you can buy and re-sell as long as you haven't opened it, but that's not a very common situation. I'm familiar with an ex-DJ guy who was extremely trustworthy, and he had some volumes that he was selling, and he straightened me out on my attempt to straighten him out :).

Anyway, just thought I'd make that little minute distinction.

Dave

The Redeye wide-angle adapter has been sold.

Other items still for sale...

Hey Benjamin
I did not get an e-mail from you. Can you post here? I've had some issues with DVinfo messages before
Bill

Have these mint condition monitors for sale . Analog Input (XLR, 1/4" TRS phone type), Digital Input (Optical/Coaxial), Digital Thru Out (Coaxial)

30 watts per speaker
These are self powered with built in amps.

price 250 for both !

Doug

The item has been sold.

Typo in title: "Swivel JoinT"

I no longer need my A91 swivel joint, which allows the angle of your AKG Blue Line mic capsules to pivot in two ways up to 90 degress.

Retail is just over $300, I'm asking for $175.

It's still in great working condition with minor blemishes from normal wear. There is no original box. I've tested it with two separate SE300B & CK93 mic combinations (sorry, these are not for sale), and the sound is the exact same when comparing it with the mic without the A91 attached.

Looking for a Cinetactics Matteblox DV or a Indiesnap matte box if you have a spare or you're not using.
E-mail me with particulars
Regards.

Photo attached... I will sell the camera without the matte box by the way...

Sorry, I couldn't get the jpg to upload for some reason... contact me and I'll send a photo...

Now 200.00