I have an unopened full retail version of Production Premium CS3 Windows that I never installed or even opened. Intended to use on dual-boot Mac system but never installed. So, fully registerable as first owner and upgradable to CS4 for $599.

$750 with free shipping CONUS. PayPal preferred.

Ned Soltz

nsoltz *** at *** aol.com

Now $450. Gary, I e-mailed you some pictures. I've never been able to post pictures on this web site for some reason.

Tip

Three carefully maintained FX1s with all accessories and UV filters for sale.

#1 -- 334 Drum run, 251 Tape run, built in shotgun shock mount -- $2250

#2 -- 376 Drum run, 306 Tape run, $2000

#3 -- 75 Drum run, 58 Tape run, extended warranty, $2500

Obviously, multiple cam discounts lovingly applied. Split Paypal fees 50/50.

PM for more info.

Thanks,

ag

Hi,

I am looking for a used IDX V-Mount battery charger. Either a VL-2, or a VL-2 Plus will be fine.

If anyone has one in good working and cosmetic condition they would like to sell please email me at: hammerhorror AT sbcglobal DOT net

Thanks,

John Dewey

Just curious! How did you come up with the hours of operation. This cams unlike the Z1 doesn't have that feature.

I shoot with a Canon H1 ,A1 and Sony FX1, all of which use 72mm filters. Anybody have a decent fisheye they want to sell?
thanks
Bruce Yarock

I took them into my local camcorder service center and had the guy read out the hours for me. Technicians have special diagnostic remotes not available to us civilians...

Part of their pre-sale checkup. Figured it was the single most important piece of info people always want to know.

John, Have you looked at some of the cheaper chinese v-mount chargers?

Hello Bruce,

Bob Jones here, owner of Skycrane.

Bruce, I have a 72mm Fish-eye lens I no longer use. It's a Century lens and was used two or three times on a Canon XL-1.

If your interested please feel free to give me a call, we can discuss the price... (949) 205-9451

Wishing everyone on DVINFO A VERY HAPPY NEW YEAR...

Bob Jones

1) GY-HD200U Camera in pristine condition, with everything that came with it:
* Fujinon Th16x5.5BRMU lens
* ViewFinder
* Microphone
* Anton Bauer QR-DVC-10 Gold mount+battery plate
* SD memory card
-Camera only has 20 drum hours,
-no smudges or scratches

2) 2x ANTON BAUER Dionic-90 batteries & ANTON BAUER TANDEM-70 ON-CAMERA charger/power supply

All for $3500

Paypal preferred. PM me or Email at Jaadgy@yahoo.com

Webb,

Interested - could you send me an e-mail so I can reply?

(Sent an e-mail through the forum a few days back but haven't heard - not sure if you didn't answer or if the spam filter caught it.)

XL2 is sold...
Mini35 $3150...
includes the XL1s plate
XL2/XL-H1 plate
Nikon adapter
I'll throw in 2 matched 1.8 manual Nikkors
85mm f1.8
50mm f1.8

25-250mm Angenieux T2 zoom in arri mount
no case but both caps. Body is rough, a rub or two on the outer element but nothing that would seem to affect image. The two on ebay went for $850 and $1350... this one must go.

Are you sure it's a T2 and not a T3.9?

Mac Pro 8gb memory w/ 3 year ext warranty $2600
Comes with the original box and all paperwork.

Thanks,

Jon

I'm interested in the camera. What is that in US $? I think that comes at around $2100 US doesn't it.

Two Kenyon KS-8 gyro kit.

There is no better way to get a stable shot then with gyros. You can use both of these on a hand held shoulder brace. I use a Zacuto with both or they can be used in cars, helicopters, boats, or any time you need a stable shot. Kenyon Labs makes the best gyros going check out their site and all prices at Kenyon Laboratories--Kenyon Gyro Stabilizers for cinematography, cameras and binoculars. (http://www.ken-lab.com) .

Reason for selling is I am upgrading to two Kenyon KS-12 gyros. The KS-12’s are 28 volts so all of the 12-volt gear needs to go to pay for my upgrade.

2- Kenyon KS-8 gyros $2800 each
1- Single inverter by Kenyon $250
1- Double inverter by Kenyon $275
2- Kenyon 12 volt batteries with waist belts $75 each
2- 12 Volt Kenyon chargers $75 each
1- 12 Volt cigarette power cord to plug into inverter $40
1- Storm case will hold one full kit $40
1- Pelican case will hold one full kit $40

New this package would cost $8,500.
I am selling the full package deal $5300 this includes paypal and you pay shipping.

Both of these gyros have been back to Kenyon this past summer to be bench tested and both are in new condition!

Hey everyone,

I'm selling a very good condition Canon HV20 with 2 long lasting batteries, the original battery, 1 extra battery charger, a Beachtek dxa-2 xlr adapter, UV filter, 2-level microphone mount for hotshoe, 2gb mini sd, step ring 43mm to 52mm, lcd hoodman, and all the original accessories. I have a 1 1/2 years out of 2 Mack warranty left and is transferrable for a $20 fee.

I'm looking to get $600 shipped OBO. Paypal preferred. I'll post pictures soon and you can pm me for them as well.

Let me know if you have any questions. Pm or post.

Best,
Andy

Lowell Light Kit and Varizoom LCD Monitor kit still for sale!!

sold thanks ian!!!!

Bump.

Price lowered to $1,225.00 (price already includes shipping to anywhere in the United States).

Please email me at: hammerhorror AT sbcglobal DOT net

Thanks!

There must be someone with a Century Wide Angle of Telephoto that would like to add filters ahead of their lens?

Will sell sunshade and both filter holders for $250 I pay paypal and shipping UPS ground in US.

VIO POV.1 Helmet Cam with high capacity firmware upgrade
This camera does 720x480 at 30fps.
See full details at their site.
V.I.O. -- The Leader in Wearable Video Technology, Digital Helmet Cameras and Cam Accessories (http://www.vio-pov.com/index.php)

Full kit includes:
POV.1 Recorder with LCD
Wearable Wide Angle camera head
LVDS cable
POV Manager software
Wireless remote control
512MB SD card
2GB SD card
USB cable
Analog A/V cable
AA batteries
Carrying case
Mounting accessories

New you would pay $699 or discount house for $599

Full kit including PayPay and you pay shipping for $425

New price of $600 shipped.

Reasonable offers will be considered...

Ned Soltz

nsoltz @ aol.com

I'll take it -- email sent.

Selling Avid XPress Pro with dongle and License Transfer Form, valid US/Can/Latin America (transfer fee of $100 to Avid).

Manuals and disks are v 4.0 but you would not need these to upgrade.

Upgrade to Media Composer 3.x for $395 (download) or $495 (box).

This is a great way to get MC 3 ($2495 retail) for less than half price.

Asking $700 or best offer. PayPal preferred. Free shipping US. Will calculate exact cost for Canada or Latin America. Shipment upon clearing of payment.

Ned Soltz

nsoltz at aol.com

Sold to Tom Robertson. Thanks Tom!

e mail sent

Thanks for the interest in the V1 but it got too close to my 6-week trip around the U.S. and I needed a camera for the trip. I'm also considering not getting the Z7 but rather switching my focus toward more artistic style shooting with the Canon 5D and keeping the V1 for backup and the occaisional corporate job. I'll post again in February if I decide to sell the V1 when I return.

this is the first generation card (without HDMI). it has the breakout cables,card and disk in mint condition. best offer over $650

Hi,

I'm selling my Canon 40D Camera body. This is in mint cosmetic and operational condition. This sale includes all of the following items:

Canon 40D Camera Body
All Software CD's
User's Manual
USB Cable
Video Cable
Canon BP-511A 7.4V 1390mAh Li-ion Battery
Canon CG-580 Battery Charger
Original Box

More info about this camera can be found here: Canon EOS 40D Digital SLR (http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&fcategoryid=139&modelid=17779)

I would like to get $625.00 for the camera body. I will cover the shipping and Paypal fees.

If interested, please email me at: hammerhorror AT sbcglobal DOT net

Here are some photos:

http://i6.photobucket.com/albums/y206/hammerhorror/body01.jpg
http://i6.photobucket.com/albums/y206/hammerhorror/body02.jpg
http://i6.photobucket.com/albums/y206/hammerhorror/body03.jpg
http://i6.photobucket.com/albums/y206/hammerhorror/body04.jpg

I have 2 tripods so its time to let one go.

This Sachtler video 14 II with compact Amvona Carbon Fiber 2 stage legs is in good condition and works flawlessly in all areas accept the pan lock which does not quite engage. The tilt lock, quick release lever and lock, counter balance, fore and aft adjustment and both fluid drag controls all work perfectly.

Perfect for the Panasonic HDX 200 or even larger. I flew my JVC HD200 (aprox 15 lbs) with all assecories and it worked perfectly. The Carbon Fiber sticks are perfect for travel or run and gun or doc work as well as dramatic pieces and are very light in weight yet sturdy.

A few normal scuffs here and there. Otherwise in great shape.

Have to sacrafice for fast sale... $900 If no bites in the next week it goes on Ebay where it will go for between $1100 and $1300.

Feel free to come look at it in the next few days in seattle if your around... thanks!

Its also on craigs with pictures here

SACHTLER VIDEO 14II Fluid head Video Carbon Fiber Tripod (http://seattle.craigslist.org/see/pho/973802682.html)

Thanks!

Shawn 303-875-1177

wow, that's sweet. I have a 15" MBP with 4GB of ram and 250GB HD. But I doubt you would want to trade.

Have you thought about splitting the kit? I would take the HV20 if I didn't spend all my money on goodies already : ). Just an idea.
Good Luck with the sale,

JS

What will you take for just the housing and WA port? jason

Sorry i never got back to you. I forgot i had this setup listed here. It was sold a while back.


Setup has been sold!

SOLD SOLD SOLD SOLD

I would consider splitting up the kit. Offer up.

Thanks.

Paul,

Might just be interested in one of these for a 5DMkII and EX1.

A couple of questions about these, are the batteries and chargers able to function on Euro voltages? and do you know if you can actually check these in on airlines being made with gas and all?

Thanks

Dan

Dan the charger input says:
100-240VAC
50-60Hz max 0.35A

I have check the full kit on planes packed in a bigger Storm case with my other gear. Of course they open everything and check. They will not let you carry the gyro or batteries in carry on bags.

Not tying to push you on both but one only solves 1/2 the problem depending on which way you set it up. I always put the one under the lens for pitch inline with lens and the one behind the camera perpendicular to the other for the roll.

I'd like to trade my Canon XH-A1 for a Sony FX1000.

I bought the XH-A1 in August 2008. I filmed one ballet recital with it (3 Hours). I also used it for one commercial (2 hours). I practiced with it for about 5 hours. I hate to admit it, but I can't get the hang of it. Its much different than my Sony VX2100. I'm thinking an FX1000 would probably work better for me.

Let me know if you have any questions. Here's a picture:
http://joethejerk.com/hv20/HV20.jpg

I have a Sony PD-170 that I'm trying to get rid off to get an A1. It is much like the Vx2100 but is a little more high end with XLR inputs. I have 2 extra batteries, and a wide angle lense. Works perfectly. I used this camera and a VX2100 as my back up camera. The footage matches up excellent with each other.

Will trade the PD-170 plus cash for your camera.

If your not interested in the trade, how much are you asking for the camera?

I know the PD170 with its XLR inputs is nicer than my VX with a Beach, but I've got my heart set on HD that is as easy to use as the VX, so I'm hoping I won't be disappointed with Sony's FX1000.

Anyway, BH has a new XH-A1 for $2999 and free shipping. I have the original box, contents, BH invoice along with an extra BP0970g ($149) battery and a tutorial DVD from VASST ($70). I also have a J-Rod twin mount ($70), which is great for mounting two microphones on the camera.

I would sell the above delivered inside the continental US with insurance for $2800. Subtract $150 if you don't want the extra battery. Subtract $70 if you don't want the J-Rod. The J-Rod by the way, is very useful with the XH-A1s microphone ring.

ebay has them for $2299

Yeah, I don't know if I can justify spending that much on a used camera. If you can go lower than that I'd be interested. There are other A1's with low hours and more accessories for less money.

ebay has them for $2299

It might be worth the extra $$ to go through a more trusted forum than Ebay. I'll buy little things off Ebay, but when we start talking about $2K+, then it's worth a little more to buy from people here. That's my humble opinion.

ebay has them for $2299

If you back out the battery and the j-rod and the shipping/insurance, I'd be at $2,480. $180 more than ebay. That's almost enough savings to pay for new heads- almost, but not quite. I think its $500 from the Canon service center.

Sony PMW-EX1 in mint condition. £2999 + VAT (£3448.85 inc.) and I will issue a VAT receipt

50 hours use from new. Over 1 year of Prime Silver Support warranty still to run, this is transferrable to the new owner. Firmware version 1.11. Includes all original accessories:

One SBP-8 (8 GB) memory card
Lens hood + cap
Large eyecup
Infrared remote commander
USB cable
AV connecting cable
component video cable
BP-U30 battery pack
BC-U1 battery charger
Shoulder strap
CD-ROM
Manual

Some pictures:

http://www.blueprint-dev.com/fs/ex1/ex1_1.jpg
http://www.blueprint-dev.com/fs/ex1/ex1_2.jpg
http://www.blueprint-dev.com/fs/ex1/ex1_3.jpg
http://www.blueprint-dev.com/fs/ex1/ex1_4.jpg
http://www.blueprint-dev.com/fs/ex1/ex1_5.jpg

This was purchased from Production Gear in the UK. All works perfectly but it is surplus to requirements now. UK purchase and pickup preferred. I am in Putney, South London. If delivery is required it will be at cost.

I will be listing some EX1 related accessories shortly.

Martin

The Canon 40D camera has been sold. Thanks everyone!