Dale Nicholson
November 30th, 2006, 02:33 PM
I just authored a dvd using Architect 3 (and Vegas). I used Memorex DVD+R 16x blanks and made the dvd at 4.0 speed. The completed dvd played fine in three different dvd players!
Last night I played it in my progressive scan (good) player for the first time, the Panasonic XP-30, and to my surprise and horror, there were several instances of what I will call digital breakup---very small rectangular boxes would momentarily pixelate on the image and then go away. A few times the audio would seem to get stuck for a second or two. Mind you, this didn't happen often or for long, but it was an annoyance--enough to cause the other viewers in my room to question it.
Here's the thing: I would rewind the disc to replay the problem area, and it would be okay. Some other part of the scene would have the problem. I even tried disabling Progressive Scan output, but to no avail.
Using Nero 4.7 speed utility software and running a Disc Quality test of my authored disc in question (a Memorex DVD+R) at the speed I originally burned it, I got the following results:
PI Errors average=647.2, total=9385279
PI Failures average=18.55 total=650181
Quality Score=0
The Scan Disc test was okay.
Is a Quality Score of zero even possible?
I had thought that the ideal was a score of 90 or higher. Can these results be accurate? Can a Memorex brand be that lousy or am I reading these results wrong? I even ran the test twice and still am getting a score of zero.
I plan on buying Taiyo Yuden? Can anyone vouch for Rima or Supermediastore.com. Didn't someone post that they were given fakes at Supermediastore? Are the shiny silver Yudens and inkjet white the same quality?
Last night I played it in my progressive scan (good) player for the first time, the Panasonic XP-30, and to my surprise and horror, there were several instances of what I will call digital breakup---very small rectangular boxes would momentarily pixelate on the image and then go away. A few times the audio would seem to get stuck for a second or two. Mind you, this didn't happen often or for long, but it was an annoyance--enough to cause the other viewers in my room to question it.
Here's the thing: I would rewind the disc to replay the problem area, and it would be okay. Some other part of the scene would have the problem. I even tried disabling Progressive Scan output, but to no avail.
Using Nero 4.7 speed utility software and running a Disc Quality test of my authored disc in question (a Memorex DVD+R) at the speed I originally burned it, I got the following results:
PI Errors average=647.2, total=9385279
PI Failures average=18.55 total=650181
Quality Score=0
The Scan Disc test was okay.
Is a Quality Score of zero even possible?
I had thought that the ideal was a score of 90 or higher. Can these results be accurate? Can a Memorex brand be that lousy or am I reading these results wrong? I even ran the test twice and still am getting a score of zero.
I plan on buying Taiyo Yuden? Can anyone vouch for Rima or Supermediastore.com. Didn't someone post that they were given fakes at Supermediastore? Are the shiny silver Yudens and inkjet white the same quality?