View Full Version : Time lapse question


James Laxton
May 20th, 2006, 02:14 PM
Hey everyone,
Long time reader first time writer. I am having a hard time figuring out how to shoot a time lapse with the "time interval" function. The selections are highlighted in blue, disabling me to use them. Can anyone help or send me in a direction to help myself? I tried changing the recording mode from "film cam" to "video cam" but it didn't help. The manual has a brief section on this, but nothing relating to my problem.

Thanks in advance
James Laxton

Vince Curtis
May 20th, 2006, 02:34 PM
Me also, maybe a tutorial is out there. . .

Matt Maiellaro
May 20th, 2006, 04:19 PM
It took me another glance at the manual also -- you do have to be in Video Cam, then Record Format should be 720p 60 (and/or at least one other setting I can't remember) then Record Function is where you can set interval, one shot, or loop.

Mike Schrengohst
May 20th, 2006, 06:36 PM
Matt,
We like timelapse to be in 1080 30p.
You usually don't go longer than a couple of minutes on timelapse.
Or better yet get a Nikon D200, does interval recording in camera now!!

Matt Maiellaro
May 20th, 2006, 06:41 PM
The format you choose for time-lapse is up to you. I recently did a time-lapse that went 19 hours, so there again, the project length is determined by you; whether it's a couple of minutes or not. I own a D2h and 2 D2x's -- not familiar with the D200's interval.

James Laxton
May 20th, 2006, 08:57 PM
Thanks very much Matt.
James