I'd like to get a larger memory stick duo than that supplied with the camcorder.

The non-pro version seems to be 128MB maximum which may be all I need.

However, the pro versions which go up to 2GB, seem to be more cost effective at MB per pound sterling.

My concern is that I download from memory sticks using a Vaio laptop or Video walkman that predate the Pro specification and I'm unsure if they will be compatible

thanks for any advice

Steve

Here's the new hc3 manual-
http://rapidshare.de/files/11637444/HDR-HC3E.pdf.html

I do think i have a cam. prob. When I try to "Capture Now" in FCP 5, I only get the 4-5 last sec of a clip. Tested both Auto and HDV Out on the cam.
Yes, I do have the correct Easy setup.
The use of AIC works O.K.

Anybody had the same problem ? Anybody hear of other with the same problem.
I have not yet tested the camera on another Mac, nor tested another HDV cam on my Mac.

Best regards, RUNE

Hey all, I went to Best Buy today for the specific purpose of shooting some footage on the HC1. I brought a DV tape with me and shot footage in the store to compare to my little PVDV953 3Chip. I would have shot in 1080i but I dont have any HDV equipment to play it back on, so I shot in DV. I was a little impressed with this camera. First thing I noticed is that the single 1/3 CMOS has a much shallower DOF than my 3x1/6" Panasonic. I also predict the low light is a bit better (wasnt able to take it outside :-( ) Anyways...I shot some footage in DV mode, manually adjusted exposure and shutter. It is quite a bother to not be able to see what aperture you're shooting at...oh well I guess...Anyways...I am rendering out a 24p DV file right now on my powerbook. I used natress and color correction to see how good of result I can get. One thing to note is the sharpness of this camera...it has quite a sharp image in DV mode. I wished I could have shot 1080i. More to come.

Think we could get a new category for the HC3, now that that's starting to make its presence felt? How about adjacent to the Sanyo HD1, perhaps as the second entry under Consumer HD?

Mine are...
color -1 and sharpness +1

Here is a short effects movie I made. I made it in about an hour, so it could have been much, much better. I made this clip to test out some of my effects. First effect is my blank firing gun (Glock 17) with a silencer. The other effect is the 2 squibs in the dirt. I filmed this using the Sony HDR-HC1. I also tested out my sound effects skills. Tell me what you think about it and I hope you like it.

Here is the video:

http://www.filefactory.com/get/feed/begin.php?f=55a39b&b=3&c=33bd019be54a1c545

Right Click, Save Target on "Click here to begin you FTP Download."

Or try this

http://dl029.filefactory.com/get/i.php?f=55a39b&b=8&c=5e319600c082aec1


File Type - MPEG 2
Size - 91.45 MB (Sorry for such a big file size!)
Length - 28 Seconds

P.S. I'm the one wearing the white tank top.

Hi, Everyone
I just got my Sony HC3 and I bought a Firewire cable to transfer video to my computer using Sony software I was able to transfer a 5 min. clip but it shows very washed and in the LCD screen from the camera looks very nice and colorful, I was wondering if anyone had a similar problem ??? I tried using Avid Xpress Pro to capture but I can't it only captures as DV 30i also washed (no much colors)

I have a firewire cable 6pin to 4pin connected to my firewire port in the motherboard (ASUS with 3.2 Ghz P4 dual core Intel Processor), I can use Sony Vegas to capture in 1080i but is also washed very pale!!!! I import the file ti Avid Xpress PRO and use the color correction FX and is amazing!!!

I'm planning to buy Avid Xpress PRO, please give me some opinion!

Thank you

Apologies in advance for the cheesy music :)

http://www.bis96gw.f2s.com/video/monkey.wmv

Filesize is about 30Mb, WMV-HD format, Constant 8Mb/s bitrate.

Probably won't be fast enough to stream, so save to disk first.

All done handheld - surprised a monkey didn't jump on me ;)

I have a Sony HDR-HC1 and edit my video with iMovie HD, and I'm having trouble knowing which format to use when exporting the video to play on an Epson P-5000 Multimedia Storage Viewer. I've tried a few different Quicktime choices using the export feature of iMovie HD but the video ends up looking stretched, or it's choppy, or the resolution is low.




Can anyone recommend the best export settings to use to play my HDR-HC1 videos on an Epson P-5000 Multimedia Storage Viewer?




Ken

I really like the progressive look of the card mode on the HC1 - is there a way to get it to record movies to the card? I know I can run it into the laptop, but I will have the laptop around...

I have a Sony HDR-HC1 and edit my video with iMovie HD, and I'm having trouble knowing which format to use when exporting the video to play on an Epson P-5000 Multimedia Storage Viewer. I've tried a few different Quicktime choices using the export feature of iMovie HD but on the P-5000 the video ends up looking stretched, or it's choppy, or the resolution is low.

Can anyone recommend the best export settings to use to play my HDR-HC1 videos on an Epson P-5000 Multimedia Storage Viewer?


Ken

message deleted

bandwidth exceeded

anyone know where they are available now?
thanks
andy

Can someone tell me if "Cinema Mode" or whatever Sony calls it on the HC1 - can it be identified by looking at the file details or by some other tag? IOW, is there a way to know footage was shot using cinema mode other than assuming such by looking at the video? Something like the EXIF data for photos?

Hi ,

I bought SR1 and there is buzz recording when plugging external mic.

Just checking if there is problem with H7 when recording in HDV with external mic.

I have to exchange soon.

Thanks
Mike

I'd love to see pics of your HDR-HC7 outfit if you've got one.

It'd be nice to get an idea of the appearance and extra weight an external mic and Beachtek adapter would bring, along with a wide angle lens.

Is anyone on their way to a setup like this?

My HC1 is acting odd lately. I previously asked about "missing footage" with this camera - I shot some footage but some of it was missing when I played it back (originally about 12 seconds). I used a Panasonic head cleaner and more of the video went missing (now about 25 seconds are missing). But - when I hit "cue and/or review", I see the video playback on both the HC1's LCD and my computer via firewire.

Tonight I shot more video and there are dropouts all over the place. Again I can cue and review and the video is there, but when I am in play mode the video stops, pauses, stutters, etc.

The problems are repeatable, more or less - sometimes there might be a single glitch. I rewind and try again and there might be two or three glitches. I rewind and try again and it might go back down to one glitch, etc.

Could this be dirt in the playback head? If so, what kind of head cleaner do I need to get? Recommendations?

Has anyone experimented with the still image function on the HC1 to get HDRI's? Would it be safe to assume using the autoexposure for the midrange - and just raise and lower the exposure for the +1 +2, -1, -2 shot respectively?

I found a tidbit at Sky Systems. They are going to produce a X-Jacket for the Sony HC/HD series. I got a reply in an email that they are looking at release in the next couple of months.

The only statement on it is in the top right corner of their current product page.

http://www.skysystemsusa.com/accessories/xjacket.html

How is chromatic abberation with the HC7 lens? Which of the teleadapters is the right move?

I shoot all sorts of things, including birds in the sky, etc where CA will really show up...

--Darin

Some shortfilm clip from sognefjord,the peace and silence is so good.
The salomon in the stream and the lamb from the yeare.

link: http://web.mac.com/vidarjohannesvedaa/iWeb/Natur/Spring%20stream.html

Before I take the leap and use my current SD camera as a trade-in (a VX2100), has anyone shot under stadium lights with one yet? Maybe a baseball or soccer game including footage in the stands? That is where I shot 70% of my footage during band season, in the stands of the band or of them on the field. Is that too close to the limit the HC7 can handle?

Just wanted to see test shots, especially at 15 lux and 60 shutter speed.

So, if you've been reading my posts you know my frustration toward the HC7 arriving in Canada and it's about to get worse...

When I tried to search up support for the HC7 in Canada, this is what I get:

"Model Find

The model you have entered is only available in the following regions:

United States"

Could the HC7 be not available for Canada as is the SR8 is not available for the US?

I'm terribly sorry, my patience is running low and I just can't stand it...

Took my water housing for a test swim today. It worked great.

http://lucasberg.com/home/index.php?option=com_content&task=view&id=46&Itemid=27

For the price this you cant beat it.

Joey

I have the HDR-HC3

Really baffled with rewind.

I have camera in playback mode. IN stopped position, if I click left arrow goes forward, right goes forward. both go forward!
If I hold down the left arrow it rewinds. REally puzzled with this. Do I have to have to press down to get rewind?thanks.

Hi I m in the process to buy the sony hc7 hd camera.affer reading your comments i have a question which is puzzle me.? Does this camera have a downconvert like the sony big brothers? or only thru firewire.Can you help me out please.otherwise i will have to choose an other camera. thanks

I got my notice last night that my Bonehead Composites Dbox is in the mail. The helmet cam is go for launch.

link - towards the bottom of the page (http://www.boneheadcomposites.com/cammount.htm)

Getting excited about building a helmet rig for my HC7* now. And you beat ya, I will post some footage from a mountain bike when I have it operational.

* - Bonehead says that the HC7 fits in the HC3 box.

I know you are curious. I am using some of the steps from here http://www.schieffer.net/8/headCamInstructions.html. I will make my own epoxy base, and will use a piece of Dr. Scholl's Gel as a damper (I may find that it behaves negatively - not enough info yet). I do want to find nylon screws to fit into the threaded flanges. They should shear in a bad spill and are less likely to penetrate if everything goes wrong.