Inspired by Shannon Rawls, I begun my quest to put together an HD field monitor which I could attach to a c-stand. Here are my results which I am completely content with.

1. Dell W1900 (http://www1.us.dell.com/content/products/productdetails.aspx/lcd_w1900?c=us&cs=19&l=en&s=dhs): $488, eBay special.
2. Avenger C-stand: $90, Craigslist.org.
3. Wall Plate with 3" Baby Swivel Pin (http://www.bhphotovideo.com/bnh/controller/home?A=details&kw=AVF810&is=REG&Q=&O=productlist&sku=3613): $27.95, B&H.
4. Bogen / Manfrotto Female Converter Socket - 5/8" to 5/8" (http://www.bhphotovideo.com/product/5356/BO3101/REG/1358): $14.95, B&H.
5. Machine Screws/Wingnuts: $0.95, local Ace Hardware.
6. Skateboard truck spacer: Free, laying around the house.

How I did it:
My first challenge was to attach the baby plate to the c-stand. This was easily achieved by purchasing the F/F 5/8" socket converter. Next, I drilled holes in the baby plate to match the screw-hole pattern on the Dell wall mount plate. Once this was done I found I was unable to fit the mounted plate onto the monitor. After digging around my garage I returned with some bike and skateboard parts. An old pair of skateboard 1" truck spacers (for when I rode with 70mm wheels) did the trick.

Here's a pretty image: http://www.feelthisfilms.com/can_shoot/cs_stand_hd_monitor.jpg

Yes, it's very sexy.

Here's Shannon's thread: http://www.dvinfo.net/conf/showthread.php?t=42494

Shannon is my hero. Huzzah!

Nice work...I love it!!!

Damn that's some nice shit. Post a picture of it from the front!