Bob,

I'm interested, email me.

Richard_Alvarez(at)hotmail.com

BUMP!

Got some good stuff here that's still for sale folks!

Going to that online auction house next week.

Could be open to some realistic offers on some stuff.

Don

Hi Bob,
I'll take it if it is still available. I'm in the LA area.

now up for auction on ebay:

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&rd=1&item=270174723898&ssPageName=STRK:MESE:IT&ih=017

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&rd=1&item=270174734670&ssPageName=STRK:MESE:IT&ih=017

Interested. PM'd you.

Price dropped to $500.

Dropped to $85

This is the PAL version DVCPRO 50 camcorder. This a complete package for P2 shooting and includes P2 Store and 5 x 4gig P2 cards. The Camcorder has the SDI and Firewire options fitted and comes complete with a KATA Glove.

Asking Price for the complete package: £7350 + VAT.

Moving out one set. Here it is ....

Canon XHA1 Video Camera
2 extended life batteries (Canon BP 970G and Lexar equivalent)
1 regular battery (Canon BP 950G)
Manfrotto 3021 BPRO Tripod
Manfrotto 503 Video Head
NADY wireless mic system
Petrol PDB-1N Bag
Petrol camera rain cover

Will sell as a set - $3550 plus shipping costs

PayPal or Cashiers check only
USA only sale

Questions - send an email (milest@gmail.com) or call me.

Thanks
Miles
208.660.9097

http://www.milest.com/images/canonxha1.jpg

one more time....well hopefully(:


ok I lied.....(:

So one of the glass is busted, or is it the plastic frame that hold's the glass? If you can post a picture, that would be helpful.

Bob,

I got your notice of a pending sale, but all my replies to your email addy were rejected.

Richard

So one of the glass is busted, or is it the plastic frame that hold's the glass? If you can post a picture, that would be helpful.



No the frame is perfectly in tact. Just the glass broke out. It still works nicely as a gel holder if need be. The diffusion is still in there too by the way. I'll post pics soon.

Sent you an email

Is this still available?

FS: MY trust Vinten Vision 3 / Miller Solo combo. ABSOLUTELY FANTASTIC setup, especially if you have to travel a lot (which I did). Comes with #'s 2 & 3 springs, though you can throw in any spring supporting up to 22lbs. If you're looking at this posting, it's likely you know that this head is (pun intended) head and shoulders above anything near its price.

Comes with Miller Solo DV legs (aluminum), which makes a match made in heaven. Together, this system goes low, high, and does so with a lot of stability and quickness.

Shipped in Petrol padded sling bag, which has extra padding around the head, and a nice pocket for the springs and tools.

I am selling because I bought this tripod in anger - I was on a long gig traveling every day with crappy sticks. I'm no longer on the gig, and no longer need the sticks. Here's an opportunity to get this much talked about setup for less than new.

Condition-wise, the setup is excellent. There are a coule scratches on the pads on the legs, and a couple light brassing marks on the head. Basically, it looks like it's been outta the bag about twice.

$1587 New (without tax), Asking $1200.

FS Altman 650L w/ Barndoors and Lamp (practically new) - $200
FS Altman 300L w/ Barndoors and Lamp (practically new) - $200


Lamps untested, though when I packed them they had <5 hours on them.

These lights are the same price new as Arris, though I got them because I found the build quality to be a bit better and the light output to be slightly higher for the same lamps. Selling because I've gone over to Dedo's for all my small lights. These are great units, but I simply don't use them anymore now that I have 5 x Dedo's.

Prices do not include shipping, non negotiable. Looking to build a fresnel kit? For about the price of knockoff ebay lights, you could start a great kit that will last a lifetime.

Canon ZR80. No mic input. 1CCD. Bad low-light performance. Asking $130, but for y'all, $100. Comes with cheap wide-angle/telephoto lenses bought at Best Buy. Crash cam?

FlipVideo first generation, 30 minutes. If your kid has outgrown swallowing small parts, give it to them, let them play video maker like Mommy and Daddy. $85.

bump...........

Hey, Video cards only come out when a system gets trashed or upgraded. The Matrox APVi is so rarely used (well, apart from me, that is) that there ain't many of them out there to start with.

Take that small number and figure, who's going to trash a system with so few hours on it/ upgrade ditto and you can see why you aren't having a lot of success.

I think if you REALLY want one, you may have to buy new, or have quite some wait.

Mine isn't up for grabs any time soon.


CS

Now 150.00

How old is this RAM?

How many sticks?

Do you take PayPal?

What would you sell it for minus the mic, tripod, and head? I realize you want to sell as a set, but I'm curious. Also, how much have you used this and what is the reason for selling?

Hi Mark!

I believe the Flip Enhanced would work with the Canon HV20 with a few step down adapters. I have the 72mm version.

There is some footage floating around of the Flip Enhanced and the HV20!

Philip - I'd only take off a few bucks, seriously, the package is way underpriced as it is. I'm selling becuase we've had our use with it and we want to move it. The camera has about 20 hours on it.

Cheers
Miles
208.660.9097

Dude, you have a future in sales. LOL.

buuump.
still for sale.

Several questions....

I don't suppose you have a tripod available as well?

Also, I just this weekend used an XL1s with the same style of Mic holder and I was a little annoyed at how well camera body noises transfered to the mic (like pressing buttons, switches, etc). Are there any after market / 2nd/3rd party shock mounts available for this camera's mic holder?

Will send PM your way with other questions.

Just chop off the lens and the viewfinder and use it for transferring your tapes.

The most inexpensive camera-saver device... until it starts eating up your tapes that is...

No the frame is perfectly in tact. Just the glass broke out. It still works nicely as a gel holder if need be. The diffusion is still in there too by the way. I'll post pics soon.


OK go to these links for pics

http://www.dvxuser6.com/uploaded/7555/1192037766.jpg

http://www.dvxuser6.com/uploaded/7555/1192037641.jpg

Canon ZR80. No mic input. 1CCD. Bad low-light performance. Asking $130, but for y'all, $100. Comes with cheap wide-angle/telephoto lenses bought at Best Buy. Crash cam?



Is the ZR80 in full working condition? Any known problems?

Also, I just this weekend used an XL1s with the same style of Mic holder and I was a little annoyed at how well camera body noises transfered to the mic (like pressing buttons, switches, etc).


Jason, try this item out (Lightwave MM-XL1 Isolater) - http://www.bhphotovideo.com/c/product/167170-REG/Lightwave_MMXL_MM_XL1_Mini_Mount.html

We use it with our XL1/2 cameras and it works extremely well.

-Ken

Email sent

price dropped to 3200 shipped

sold except for brevis to rails mount. e-mail if interested.

I purchased this 4x4 bellows matte box system from Cavision (in Canada) for my XL2 and ended up using it once for a documentary.
Since then it has been stored in it's hard case. Everything is in superb condition.

What's included (what you see in the associated links is what is included):
- Cavision RS-1525 15mm dia. 250mm (25cm) long Carbon Fiber Rod Support System
http://www.cavision.com/rods/RS1525.htm

- Cavision MB413B-2 4"x4" Bellows Matte Box
http://www.cavision.com/matteboxes/4...4x4bellows.htm

- Cavision MBF-5P French Flag
http://www.cavision.com/matteboxes/more/4x4flaps.htm

- Cavision RHD1560 Dual Hand Grips
http://www.cavision.com/rods/RS15HD.htm

- Cavision R15-LS25SET Lens Support Bracket
http://www.cavision.com/rods/lenssupport.htm

- Cavision HCM4 Hard Carrying Case
http://www.cavision.com/matteboxes/more/HCM4.htm

- Cavision Canon System Plate for XL1/XL1S/XL2/XL-H1 cameras

- Adapter Rings to fit 72mm and 58mm lenses and to fit the Century Optics 0.7x WA adapter

The entire setup cost me over $900 when purchased new about a year ago, and it's probably a bit more expensive now.

I'm asking $700 for the entire package incl. shipping via UPS Ground to CONUS. If using PayPal I'll split the fees with you.

My eBay ID is kennyg92 and I have a 99.7% feedback rating over the last 8 years (377 total with 1 negative 2 years ago from a jerk seller).
I have also bought and sold here on DVinfo several times.


Here's some photos of the mattebox package.

Not pictured are the adapter rings or the lens belt that fits on the Lens Support Bracket (this is brand new, never been used).

http://www.omegastudios.net/temp/cavision01.jpg
http://www.omegastudios.net/temp/cavision02.jpg
http://www.omegastudios.net/temp/cavision03.jpg
http://www.omegastudios.net/temp/cavision04.jpg
http://www.omegastudios.net/temp/cavision05.jpg



Thanks for checking this out!!

-Ken

Updated Availablity and Prices.


Video Camera's

Sony HVR-V1U HDV Video Camera - $3195

· purchased new in Novemeber 2006

· comes with 3 year transferable warranty from Henrys.com

· Hours: Op - 32x10, Drum - 15x10, Tape 12x10, Thread 21x10)

· comes with all accessories and below:

· Sony BC-V615 rapid charger

· 1x Sony NP-F770

· 1x Sony NP-F960

· 1x Sony NP-F570

· 2x Sony DVM 63 HD tapes

· 1x Sony Head cleaning tape



Sony HDR-FX1 HDV Video Camera $2095

· purchased new in January 2006

· hours unknown but should be very low - approx <80

· Comes with all OEM accessories and below:

· 1x Sony NP-F770

· Pelican 1550 Case

· 1x Sony NP-F550

· 1x Sony NP-F330

· Sony HVL-20DW2 Light

· 2x Sony DVM 63 HD tapes



Sony HDR-HC3 HDV Video Camera $695

· purchased new in June 2007

· comes with 3 year transferable warranty from Henrys

· comes with all accessories

· camera only really used to transfer video (10 hours)



Tripods / Dollies
Manfrotto 503 Video Head / Amnova 6906 legs - $SOLD

Manfrotto 558B Video Monopod - $SOLD

Manfrotto 127 Dolly - $SOLD



Cases

Pelican 1660 (black) with wheels and Foam (cut for all cameras and equipment) - $225

Pelican 48" Tripod/Light Case with pockets and straps -$SOLD


Microphones

Sennhieser Camera set Wireless Mic/Receiever - EW-112-p G2 (purchased in July 2007 - used only once for 15 minutes) Virtually new in box. 518-554 MHz - $470

Sony wired lapel mic - ECM-44B (XLR plug) - Virtually new - $85

For more info please contact heathtaylor@cogeco.ca

I really want it, if you can hold out till the middle / end of october ill take it off your hands.

seriously though...

email me, agarabaghi@gmail.com

maybe we can arrange some payment for and u just send it to me once ive paid it in full...?

Yeah I'd like some info on the ZR as well. I'm building a Snorricam and I think my XL is way to heavy and my old ZR10 crapped out on me.

I'm selling my tapes of Chris and Trish Meyer's Videosyncracies on Amazon.com. Chris and Trish are renowned in this industry as motion graphics and after effects experts, and while these tapes are dated, they contain very sound principle advice, and are to the best of my knowledge the only real tutorial they have put out.

http://www.amazon.com/VideoSyncrasies-Motion-Graphics-Problem-Solver/dp/B00003L4FO/ref=sr_1_3/002-1978465-3128815?ie=UTF8&s=video&qid=1192061906&sr=1-3

I have these monitors and they are awesome! That's a great price.

Hi Tim!

Im out of town till next monday but will send you pictures as soon as I get back. They are actually sitting on an external hard drive at home. Let me know if there is anything in particular you want to see.

Alan

...bump...

anyone interested?

trade
what about a cost..how much would you ask for it cash..and would you ship to me here in canada?

thanks

Pete
www.kre8-fx.com

will you ship to canada?

my email pmanderfx@gmail.com

pete
kre8-fx.com

email sent

Bump...

cam is in excellent condition, all accessories, plus I've got extra batteries.

Anyone looking for a nice "entry" to HDV?

Is it still available? Will it handle a Canon XHA1? Can you send a photo?

Canon ZR80. No mic input. 1CCD. Bad low-light performance. Asking $130, but for y'all, $100. Comes with cheap wide-angle/telephoto lenses bought at Best Buy. Crash cam?
I love this post. That's how all sales should be in my opinion. BTW, I'm not a good salesman either.

Jaron,

I'm in the market for another Vision 3 head. I don't need the legs, so if you decide at some point to sell the head alone or someone else wants just the Miller, let me know.

Thanks,

Vence