New lower price is $100.00

I also found a VHS cassette training program for the camera.

Jason is this the same as the current unit that Tiffen sells? Have they made changes since you purchased the Merlin?

Paul, Yes it is the exact same unit that is being sold by Tiffen now.

Do you know if the unit will handle a Canon A1 with wide angle?

Are you open to offers?

the HVX200 weights ~6.3lbs with battery and the xh A1 is 5.2 lbs with battery. The merlin should be able to support the A1 without a problem.

There is also the metal gimble update that you can do with the merlin now in order to increase the weight capacity of the merlin.

Our merlin unit is almost as brand new. You wont be dissapointed.

Never received the pictures, could you send them again? Thanks

I'm also looking fo a XL2 (preferrably a body and viewfinder only - don't need the lens or accessories) I'll be in Las Vegas over the weekend (July 14) and will do a cash deal.
email: siucoharley@hotmail.com and put "XL2 for sale" in the suject line. Thanks (Only mint condition, low hours please)

Hey,

Does anyone have the Canon FU-1000 viewfinder that they are looking to sell or would be willing to sell? I'd be interested in one ...

Michael

I purchased this 4x4 bellows matte box system from Cavision (in Canada) for my XL2 and ended up using it once for a documentary.
Since then it has been stored in it's hard case. Everything is in superb condition.

What's included (what you see in the associated links is what is included):
- Cavision RS-1525 15mm dia. 250mm long Carbon Fiber Rod Support System
http://www.cavision.com/rods/RS1525.htm

- Cavision MB413B-2 4"x4" Bellows Matte Box
http://www.cavision.com/matteboxes/4x4bellows/4x4bellows.htm

- Cavision MBF-5P French Flag
http://www.cavision.com/matteboxes/more/4x4flaps.htm

- Cavision RHD1560 Dual Hand Grips
http://www.cavision.com/rods/RS15HD.htm

- Cavision R15-LS25SET Lens Support Bracket
http://www.cavision.com/rods/lenssupport.htm

- Cavision HCM4 Hard Carrying Case
http://www.cavision.com/matteboxes/more/HCM4.htm

- Cavision Canon System Plate for XL1/XL1S/XL2/XL-H1 cameras

- Matte Box Adapter Rings for Canon XL series lenses & Century Optics 0.7x WA adapter



The entire setup cost me over $900 when purchased new about a year ago, and it's probably a bit more expensive now.

I'm asking $780 for the entire package incl. shipping via UPS Ground to CONUS. If using PayPal I'll split the fees with you.

My eBay ID is kennyg92 and I have a 99.7% feedback rating over the last 8 years (377 total with 1 negative 2 years ago from a jerk seller).
I have also bought and sold here on DVinfo several times.

If you're seriously interested and want photos of the entire setup please let me know. E-Mail works the best.

-Ken

if your open to splitting it up

id be interested in the french flag
the dual hand grip
the lens support.

you could still sell the matte box with rods and a case as a combo.

to all others looking i have the same matter box and i think its a very good one.

let me know ken.

hey eric whats the difference between what you have and the "ew100" series or are they the same thing... ??
http://www.dvinfo.net/conf/showthread.php?t=97406&highlight=ew+100
is this the same as what your offering ?
let me know
MEKHAEL

hey eric whats the difference between what you have and the "ew100" series or are they the same thing... ??
http://www.dvinfo.net/conf/showthread.php?t=97406&highlight=ew+100
is this the same as what your offering ?
let me know
MEKHAEL

The EW100G2 is just the microphone... It's included in the kit.

Canon GL2 #2
excellent condition
Fairly low-milage: approximately 80 hours on heads
All original accessories, including original box.
Also screw on .7x Canon WD-58 Wide Angle lens (originally $170)
Asking $1,350 plus fees (shipping, paypal, insurance, etc.)

-Vence Vida

This one is pending sale to me!!

Thanks Vence!

Canon GL2 #2 has been sold.

The first one is still available.
Note: the wide angle lens with #1 is NOT a Century Optics .6.
I was wrong about which lens we had sold and which one we still had.
It is a Professional Digital .45 with a macro converter. It is smaller and lighter than Canon's WD-58 but has a wider field of view.

Willing to split the set, if anyone is interested.

-Vence

Hi Mekhael,

At this point I really want to keep it as a package deal, as it's only been posted for less than a day.

If no one wants the package after a little bit I may be willing to divvy things up, but not until then.

Thanks.

I'm also open to reasonable offers for the entire package.

-Ken

are the 7600 GT cards AGP or PCI-E?

Hello
if anybody is interested in this deck
i'll take $1700.00
thank you
Joe Benoit

Lowered the price to $900. Let me know if you are interested.

Everything is included with it:

The Mattebox
15mm Rods
French Flag
Filter Holders
Lens Rings

I have the full package M2 with the all of the accessories including the micro Follow Focus and a Nikon lens adapter. I also have 3 almost new Nikon prime lenses. Before I place on eBay I thought I would give someone in this group a chance at purchase.

I can send pictures to anyone interested. I am selling because for my line of business (commercials) I need a quick run and gun approach and the lens adapters do require some set up. I ended up buying a full blown pro camera instead.

Any questions please let me know.

Darrin

I'm selling a Century Optics model 0VS-FEWA-HDS bayonet mount Fisheye lens for the Sony FX-1 or Z1. It's a little under a year old has seen sparing use and is in excellent condition.

http://www.bhphotovideo.com/c/product/361305-REG/Century_Precision_Optics_VSFEWAHDS_VS_FEWA_HDS_Fisheye_Adapter_with.html

$350 OBO plus shipping (should be cheap since it's small). US and canada only.

PM or email me thru the BB.

Cheers,
Scott

$300 obo
OpTex .65x Wide Angle Converter with Bayonet Mount, B+W 82mm UV Haze Filter & Kenko RHC-85 Lens Hood

These items are about a year and a half old but haven't been used in the last year and in perfect condition. No scratches no marks. You will not find a new or used one in better condition.

OpTex .65x Wide Angle Converter with Bayonet Mount
* Increase your camcorder’s coverage by 35%.
* The .65x Wide Angle Converter is equipped with a bayonet mount for use on any of the 58mm Sony cameras, like the VX2100, PD170, VX2000, PD150, and DSR250.
* Bayonet mount gives you the convenience of handling afforded by the bayonet fitting and eliminates the chance of damaging the lens filter thread.
* Offers exceptional optical performance. Changes the focal length by a factor of about .65x. Used on the Sony PD150 camcorder, the zoom range of 6-72mm changes to 3.9-46.8mm.
* Zoom-through

B+W 82mm UV Haze Filter
Haze(UV) filters are wise initial investments. They help protect your valuable investment from dust, moisture and scratches, which can lead to costly repairs. If desired they can be left on the lens at all times for protection. Haze filters provide additional benefits of correction for Ultraviolet(UV) light which can register on film and videotape as a bluish cast and can obscure distant details. Ultraviolet filters allow you to correct for the UV effect to varying degrees.

UV-Haze filters are helpful when photographing mountain and marine scenes, where increased haze threatens to make your photographs indistinct in color and clarity.
B&W slim filters are for wide-angle lenses and are 3mm thick. They do not have a front thread. Multi-coated to minimize reflection at the filter surfaces which reduces flare and ghosting.

Kenko RHC-85 Lens Hood

Still looking.

This is a card for the MacPro that will greatly improve performance of programs like Motion etc.

Brand new. Never used. Been out of the box once. Ordered by mistake and then the return time limit lapsed. Comes in an Apple-branded box and includes DVI to VGA adapter.

CNET review with stats is here: http://reviews.cnet.com/graphics-cards/ati-radeon-x1900-xtx/4505-8902_7-31678172.html

I'd like $200.

email sent

item is SOLD!!!

$90 perfer pickup in studio city

buyer pays shipping/insurance

e-mail at tangfilms@yahoo.com

Hey Matt
PCI E

Great frekaing cards, but I am plurging and getting an 8800GTX and a blackmagic card
but these for gaming and rendering are great
I get 29.97 fps using magic bullet on standard definition footage in premiere (2.6ghz duo core processor) and like 30fps with full settings in Flight Simulator X

Thanks, I'm looking for an agp card.

Hi Michael,
I've got one I am selling. It's in great condition. Works perfectly. Send me an email and I can send you pics.

Matt

I am selling a bunch of Canon XL2 / XL1s gear. Everything is in excellent condition.

Canon CH-910 dual battery charger.....$80
Canon MA-200.....$225
Canon XL 1.6x adapter.....$250
Canon EF XL adapter.....$275
Canon 3x Wide-angle lens.....$750

Also,
Century Optics 1.6x adapter.....$475

Add actual shipping cost + Paypal (3%)

Thanks for looking.

I have a radeon 9800 pro
it's AGP

Forgot.

It was originally a $400 card back in 2003. Stil lgot quite a bit of kick to it. Will sell it for $100-ish. In good shape, but missing the drivers CD. Should be easy enough to find online.

Might be interested in some of your Nikon lenses... what do you have?

Thanks,
Blake

I have already got a Radeon 9800 Pro. Thanks though.

Hey Steve what's the aperture size on the lense?

I'll take it...



ash =o)

Nevermind, I need the G5 edition.



ash =o)

hello all

So i find myself in the market for a used canon hv20 - maybe you want to upgrade to the xha1? either way, my capture cam got junked on my stag so i'm hoping if anyone is selling i'm willing to pay a reasonable price.

Shoot me off an email vgurung@shaw.ca - i'm in Vancouver, Canada and i'm a fast and reliable payer.

Cheers

Vish

Hi Eric, just a few questions...

Is this kit compatible with the Canon Xl2? (I clearly have very little audio knowledge)

I'm in the process of gathering equipment for my next project and a good lac mic is high on the list of priorities.

Also, provided I paid for the shipping, would you send overseas?

Do PAL/NTSC camera's make a difference with these mic's?

Cheers -jon

will take €8500

Hmmm I believe it's 4.5 at 50 and 6.3 at 500........you can get the specs here------

http://www.sigma-photo.com/lenses/lenses_all_details.asp?id=3307&navigator=3

Still available?

Audio systems don't care which camera they're on.

PAL/NTCS doesn't matter.

I've only shipped over seas one time and it's very expensive but if you don't mind paying the shipping, I can ship over seas. You'll need to be a verified paypal user.

Price - $1800. Would consider trades...let me know what you have.

First off...these things are big and heavy and don't hold up well during shipping, they get banged around a lot by UPS and therefore, if shipped, I cannot guarantee that it will arrive in perfect working condition. Because of this, I would MUCH rather sell to someone local who can pickup (I am willing to deliver...within a reasonable distance) that way the seller knows what he or she is getting. I am located in Mahopac, NY (in Putnam County, 1 hour north of NYC). If you REALLY want me to ship these and are willing to accept the risk and pay to have them boxed up and shipped (your probably looking at $200+)...email me.

OK, now that all that's out of the way...I'm selling a Sony BVW-70 Betacam SP record/edit deck (includes an additional deck for parts, maintenance manual and extender boards). The deck is in perfect working condition and just serviced (completely inspected, cleaned, adjusted and the DM-56 board was refurbished). Heads measured at about 60% life remaining. The hours meter does not work (dead battery), so I have no idea how many hours are on it. The only known problem with the deck is the "Entry IN" button on the front is stuck and doesn't function. This only matters if you are editing from deck to deck, but even then it would work fine remotely. This isn't an issue if your editing with a non-linear system as most (if not all) editors are these days.

The serial # is 11506. The serial # on the parts deck is 11772. The parts deck is missing the boards, front lower control panel, tape loader & power supply. It does have heads and drums in excellent condition as well as all other mechanical parts.

The BVW series is the workhorse/high end models of the Betacam SP decks. Features 4 channels of audio, built in TBC, confidence heads, Dynamic motion control (DMC), plays and records both large and small betacam and betacamSP tapes. If you're reading this listing you probably know what you are looking at. These decks originally sold for over $35,000 each when they were new.

Feel free to email me with any questions. If your interested let me know, I can take some pictures or you can come and see the decks in person. Since local pickup is preferred...cash payment is preferred. Paypal is also OK, but buyer pays the 3% paypal fees. I will take a check or money order, but I will have to hold the deck until funds clear.

Is the ef adapter still up? It comes with the two lens shipped for $350?

Sorry, this whole lot was sold a while back. The street price for the ef adapter and similar lenses still seems to be around 350-400.

I have one I am considering selling. It has a fixed Nikon mount and works very well. Is there a specific price you're looking for?

I'm looking for a steadicam vest for an engineering project - it does not need to be perfect, but it does need to be clean. I would consider a full steadicam system as well.

Thanks,
Jad

Hi Monday -
I'd be interested in splitting the package - PM sent

Anyone else at $3550?

you only interested in hv-20? or hv-10 as well?