Frezzolini LW-16 (Auricon Movement). This camera is similar to the CP-16A.

This is a near perfect machine, overhauled and quiet as a mouse. crystal sync 24fps, two 400" mitchell mags, a very nice Angenieux 12-120mm. will happily roll 100ft of neg and get it processed and would gladly meet you at the lab where they will kindly project the neg. shoot charts, check for scatches, etc.

this package would come with a modified (for the camera) battery
pack (Beva 12V Lead Acid) which comes with a battery carrying case so that battery can be placed on the ground, etc. battery was customized by my old film school mentor/professor who runs a 16mm film program at
Connecticut College. runs forever, and recharging setup is a simple swap
of two pins. neat setup there. Band Pro purchased Petrol Bag INCLUDED!
Virtually Unused!

I will also include with this Camera:

- Petrol Bag 2yr old. Perfect con'd.
www.thebroadcastshop.com/sales/detail.asp?partno=PE%2DPCUB2

- a variety of Tiffen 72mm threaded filters (85B, ND .3, .6, enhancing
filter, Low-Con) with a padded filter pouch for up to 10 round filters.
The 85B (Hoya) is in fine con'd, the ND's are perfect. Enhancing and
Low-Con used once for testing.

- French Flag purchased at Film Tools in Burbank. Clamps anywhere. Very
nice given that there I never used a matte box with this camera.
http://cinemasupplies.stores.yahoo.net/clamfrenflag.html

- 5 rolls 100' EXR stock (3 years old) for scratch testing, etc.
threading practice.

- manual can be downloaded online.

- i can send you 7218 shot with Frezzi via QT. also shot a project on B&W
reversal which looks great but the transfer was OK.

FYI- one of the 400' Mitchell Mags is BEAUTIFUL. the other 400' Mitchell
appears older and does not have the same asthetic beauty. the second mag
is missing one core adaper. Also, I have misplaced the rubber eyepeice cup
because it interferes with the loading door. One can be mustered up
easily I presume. The lens is the pick of the litter out of 5 Angenieux
12-120mm that my mentor had. He also overhuals bolex's, scoopics,
beaulieu's, and all sorts of 16mm prime and zoom lens's. This is in part what makes this camera such a gem. I also babied this camera.

Cost with *everything* above, EXCLUDING shipping: $1100 USD (again, this price includes filters, petrol, french flag)

When you say XL2 "kit", what is meant by "kit"?

IOW what's included with the XL2?

It is included, they are hard to find at retailers, I had to order from Cavision direct.



ash =o)

when I put up "MY XL2 KIT" I wanted to sell everything on the list together. It looks like it's going to move in pieces now.

when I put up "MY XL2 KIT" I wanted to sell everything on the list together. It looks like it's going to move in pieces now.

My question wasn't about your title but rather the "XL2 kit with 3 extra batteries - $2650"

So what is included with the XL2 besides "3 extra batteries"...... ?

"...what we have here is a failure to communicate!"

Lol, the xl2 kit has everthing the xl2 is sold with except for the piece that holds the dual battery charger PLUS 3 extra batteries. And if you buy it now I will throw in free shipping.

price drop to $550.... any interest?

I am in need of EF adapter for my XL2, unfortunately it is not available in the market, not even in Grey market. so plz anybody can HELP.
Ashok Mansur

Currently looking for the Marshall V-R70P-HDA and willing to consider package deals with accessories. Thanks.

Hi Jerome,

Yes, I would consider the trade. PM me with the details. Thanks for your interest.

Tom

Michaels payment has cleared- this item is sold.
Thanks to all.

Steve,
You wacky guy...How come you sold it?
bruce S. yarock

E-Mail sent.

I know Bruce- I do this all the time- buy a camera at full price then end up selling it within weeks, at a loss- this is the consumer electronics game!

The good news for me is that it looks like my "perfect" camera is coming out----

http://www.dvinfo.net/conf/showthread.php?t=83341

This equates to a A1 with Firestore for me and is exactly what I've been wanting. I'm sure it wont match the A1's image quality but if it's even close I'd love it!

I still have the FS4HD which I'll try to sell harder as soon as this new HD7 is released- I'll also sell my JVC HD1U as well.

Not much sense for everyone I'm sure- but fits my needs to a TEE!

Keep in touch Bruce.

$890 USD, Everything still included in this price.

XL2 kit with 3 extra batteries

CANON 3X LENS

Lee filters lightweight video hood wth Converter ring for XL

Tiffen Square ND.6 Grad filter

Everything is in good condition, about an 8 to 9 1/2.

All the above items, taken together for......$$3350 + shipping! jump on it now.

Dropping the price to $7100. There are some marks on the evf plastic. I called Canon and it will cost $60 to replace so I think my additional $200 drop will adequately cover this. The marks do not interfere with the functionality of the camera in any way. They are also not noticeable when looking through the viewfinder.

Considering a Seinheisser or the Azden dual lav system. If anybody has something like that, please let me know. Thanks.

Thanks Steve, nice to meet you in person!

I highly recommending buying stuff from Steve, firstly because he keeps buying all the newest stuff, and then selling it at a discount ... And secondly, because he's a pleasure to do business with.

** And if you give me a couple of weeks, I might take that Firestore off your hands, unless someone beats me to it.

Thank you Michael, a likewise pleasure to have met you. Let me know how you like the camcorder.

I'm selling my Bebob ZOE-DVL remote purchased from B&H about 12-13 months ago.
Here's a reference pic of the model I have:
http://premium1.uploadit.org/gts007//ZOE_DVL_1.jpg

Its for MiniDV camcorders with a lanc input (Sony/Canon) or the camremote input on the Panasonic DVX100/HVX200.
Like new cosmetic and working condition. It was never abused and I used it on an FX-1 and VX2k for only about 15-20 shoots total (weddings, classroom shoots, and a few sporting events). I never lent it out. Asking $200 shipped (via UPS to the U.S. and USPS Global to Canada). I payed $249 plus shipping for it at B&H.
My ebay status is 100% positive with 99 feedbacks. I can do Paypal or check/money order. Reply here or PM/email me with questions and serious inquires! spoonmann_@hotmail.com

great to see some film cameras up for sale :)

This interests me. Are you able to post a picture of your gear? What's the cost to get the film processed where you normally go?

I have these for sale:

Apple Final Cut Express HD Retail (M9732Z/A) package, which includes these DVDs: Final Cut Express HD Install (FCE, LiveType, and Soundtrack), Apple Loops for Soundtrack, and 2 discs of LiveType data. Also includes all the literature, including FCE and Soundtrack guidebooks, and the original retail box. The only thing I can't find is the FCE Quick Reference card, and I'm confident it's around here somewhere. Apple sells this for $299; I'm looking for $200 shipped.

http://www.apple.com/finalcutexpress/

Also, Adobe Encore DVD 1.5. This is the retail version, I have the manual/quick reference and the DVD box for the disc (no retail box). Perfect for an upgrade to Encore DVD 2.0, or use it as is. This is Windows-only software, also.

Adobe's page on license transfer, which I will insist we follow:
http://www.adobe.com/cfusion/knowledgebase/index.cfm?id=tn_15281

I'll sell this one for $100 shipped.

(Looks like the edit option expired on my original post.)

Updated the price to $1350 for the above - thanks!

Robert

Hi Dennis,

If you don't do a deal with others for $75, I'll bite - I can use another adapter for my extra tripod.

Warm Regards,

Michael

This interests me. Are you able to post a picture of your gear? What's the cost to get the film processed where you normally go?

HI Lisa,

below are a couple small QT downloads. re: film, processing and transfer. you can work out deals with kodak and just about any lab for discounts if you are a new at the whole thing. they want and need your business, remember that! i can email you more specific info on the matter as well.

noteL there is a red light near the eyepeice that should only come on for a
second until the camera reaches speed at 24fps. this is your crystal sync
indicator light. you can see it come on for a second when the camera motor starts to roll. there are two on/off buttons. a voltage meter and a
footage meter. on the back.

here are the little iSight movies that you can download off my server.
you should be able to hear my cat meowing in the backround. shot late at night, with my built in laptop camera, and i'm not very coherent at all. also, the small kitchen space might increase the sound of the camera you will hear. when the camera is in shooting mode, you can record audio very close to the camera when shooting interiors. If you are EXTREMELY close, you can easily toss a blanket or a couple towels over the camera to absorb any add'l camera noise. feel free to email me offlist. thanks!

http://www.447productions.com/frezzi.mov
http://www.447productions.com/frezzi2.mov
http://www.447productions.com/frezzi3.mov
http://www.447productions.com/frezzi4.mov

Ken, I did't received, my email Id; 1) ashokmansur@rediffmail.com
2) ashokmansur@yahoo.co.in

I have 17 Panasonic MiniDV tapes for sale. Some are still in the original plastic wrappers. The others have been opened only to apply a barcode. Barcode labels have since been removed. These tapes have NOT been used, they are NEW. The tapes are left over from several video shoots. I use Sony tapes only.

Description:
Panasonic AY-DVM83PQ (with memory)
BH Photo sells for 5.99 for 10-49 tapes.

I'll sell for 4.50/tape for all tapes. Paypal only.

email: bill.rankin@sbcglobal.net

Taylor,
To be clear, this is a STANDARD 16mm, not a Super 16mm modification, correct? ANy ideas if/what a gate modification would entail and cost?

Richard

This item seem to be out of stock everywhere and I'm getting no reply from Cavision. I sent them another email today. Anybody out there selling one of these? Anybody know if Cavision is still making these? Thanks!

email: mindlee at gmail dot com

min

I was wondering when the dead line is to submit our 60 second video?

Dale that last post went right over my head- what did you mean?

Taylor,
To be clear, this is a STANDARD 16mm, not a Super 16mm modification, correct? ANy ideas if/what a gate modification would entail and cost?
Richard

Hi Richard- yes, this camera has a 1.33:1, Standard 16mm gate. the camera is single claw, and a super-16 mod would certainly be possible. taking a quick glance online, conversions seemed to be going to appx $900. it was far more expensive 3-4 years ago.

SIDEBAR: when i first bought the frezzi in 2003, the first thing i wanted to do was invest in the S16 conversion. this was also right around the time when kodak was rolling out the Vision 2 lineup, and the first to come off the line was 52/7218, 500ASA. so kodak was doing a big push, and i went to a presentation in NYC that promoted the new technology they were implementing in the Vision 2 line, etc etc. so i asked kodak for a demo roll and they gave me 400' of 7218 (which anyone can do if they call up a rep and sweet talk them a bit).

so a DP buddy of mine and i thought that we might be in luck with these new stocks, so we ended up shooting a test rating the 500 stock normal, framing the test shoot for 1.66 (S16 aspect ratio) and then did a normal process and 18% grey card one lite transfer to prevent any noise or supress any grains in telecine by under/over exposing. we then imported the 720x480 NTSC one lite transfer to miniDV into FCP (lab used 3:2 pulldown added 6 redundant frames to give us 29.97 for easy in, easy out) we then added top and bottom bars that gave us a exact 1.66 aspect ratio. we cut the test scene together, brought in the audio with perfect sync, output back to DV tape, and screened the footage to a variety of people to see what they thought they were looking at. video, film, 35, super 8, HD.... most people who didn't know about things that are 2nd nature to US thought it was 35mm. the more trained eye could not make a absolute distinction between 35 or 16 when we asked, so in our minds, we could now shoot with a standard 16mm camera and frame for 1.66 or 1.85 and the emulsions have become SO good that cropping the 1.33 frame was now nothing like it would have been with older EXR or Vision film stocks. we shot a few projects and specs when i was living on the east coast and it was a kick when people thought we must have been shooting with an Arri SR3 Advanced when we were actually shooting with a $2000 camera built in the '80's. this is something that we can never be able to do with electronic capture, and another reason why my girlfriend tells me i should NOT sell the Frezzi.

in essence, kodak has upgraded all cameras that work properly which is what makes the frezzi a great tool. my problem is that i've got the HD flu.

i have not done a test, but i would love to frame for 1.78 (16x9) and shoot the 50/100/200ASA Vision 2 stocks and do a 2k 16x9 transfer to HDCAM or D5, with the frezzi. hmmmm.....

Thanks Taylor, thats an EXCELLENT response. And frankly, did not help me at ALL in getting over my HD flu.

I also saw a demo of the Vision stock at Worldfest Houston back when it came out and was very impressed. I really really love shooting film. I've always wanted to OWN a S16 setup, or a solid R16 like your own Ffrezzi package. And your price is really good and honest...

But the nagging flu is awful, aint it?

Currently shooting with the XL2, eyeing the XLH-1, not happy with HDV workflow and options at this point... and lusting after your Frezzi package,

Richard

Sent you an e-mail......

Min, I find I get great service from Cavision if I actually call them via telephone. The guy was very helpful and I received my order within a week. Maybe give that a try :)

Still looking.

Free, to a good home (you pay shipping). I have a Seal Skin all whether rain/snow cover, (with inside pockets for heaters). It does NOT have the shoulder strap. It fits the Canon XL-1 or XL-1s. It will NOT fit the XL-2 (unless you cut it). Oh, color is camo! First come, first served! Bob

i'd love it Bob - I assume it will fit the H1.
Paypall?
Thanks,
John

Edit of my original message. Sorry, I do have one which I was going to offer you, but now I think it may be what we need for a Canon A1 that my husband is buying. Sorry... I'll do more research and get back to you if it's still available.

if john doesnt work out ive got an Xl1 that would love a winter coat..

let me know

mekhael_trepanier(A)hotmail

Right here man, everything you seriously need:

http://www.dvinfo.net/conf/showthread.php?t=82014

I'm guessing the chassis to the H1 is closer to the XL2, in which case it won't fit???

I purchased this software for a project and never ended up using it. I no longer have a Mac powerful enough to use it, so it has to go. This is the Academic version, also.

This can be used to crossgrade to the Universal Binary Final Cut Pro Studio for $199.

I'd like to get $200 for it.

I have a ton of positive Ebay feedback, also (in case you're nervous that I'm dishonest)

*bump*

$2900 or BO

- Kyle

http://www.447productions.com/Frezzi500ASA.mov

the link is appx 1.5 min, 27mb and will take a few minutes to load. the ACTUAL size of this file is 360x240, h264. i will try to make a larger image size with less download time, but for now, you can get a good idea.

for this test, we did not have a camera assistant so we had the talent (not really talent) walk into thier marks without pulling focus. we did the same action at a 3 different focal lenghts and the lens was at around T4 as i recall.

i shot a grey card exposed exactly to 18%, and had the timer at the lab dial his knobs to that 18% card and so in essense, what you see is exactly what was shot. i wanted to see what kind of latitude the new stock had as well as inherent color. also, i did NOT apply a single color correction tool to this QT because i i wanted you to see the film stock at its default position.

in terms of how the camera shoots, this QT is very telling of perfect shutter timing and well tuned motor, claw movement, etc. i've owned 16mm camera that had all sorts of flickering and gate wobble that drove me crazy. the lens also preforms well here and the more i think about it, the less i want to sell the camera!!!! nice DOF, incredible highlight and shadow handling!

WTF am I doing shooting HD?????

thanks but I definitely can't afford that

My limit is about 3k

Still available...$100 shipped in the US!!

Still available....$600.00 shipped.