I have a client that shoots on a FS-7 at 1080x 1920 and I need a picture profile that will come close to the FX-7. But , I also want to have several picture profiles for the X320...so if any of you know where or how I can get some profiles..please pass them on to me. email is camguybill@gmail.com...thanks

The problem is that the FS7 is capable of providing a wide range of different looks that go way beyond anything the X320 is capable of. The only way you'll be able to match them is to get them side by side . . . setup the 320 to look as good as you can . . . and then get into the paint menus of the FS7 and dumb down to the point that it looks similar to the 320. You'll never get very good match, but you may come close enough for some purposes. I'm sure this is something you will have to do yourself because I seriously doubt you will find anyone who has taken the time to create matching profiles for that particular pair of cameras. And on top of all that, you're never going to get a very good match between a 1/2" camera and one with an S35 sensor. Good luck.

I know............

hello Doug...

yes I have to "dumb" down the FS-7...but do you have any picture profiles for the x320 that you can sent or sell to me?

Thanks

Sorry, I have no experience with X320. But I'll bet any profiles for the EX1 or EX3 would probably be a step in the right direction.