Within a few weeks the stage shows starting again and the DVX200 will be for close ups and the GH5S for the wide shots. I shoot in 4K 50P 8bit internal on both.

Don't want to shoot vlog here. Is there a scene file that match both camera's?

At this moment I only have the 25mm F1.7 lumix lens for me GH5S. I want to buy the lumix 12-60mm for this type of wide shots.

There are scene fles published by Barry Green for matching GH4 and DVX 200. May be these scene files do also match the GH5s.

Joachim

dvinfo.net/forum/panasonic-dvx-dvc-assistant/530501-dvx200-scene-files-gh4-looks.html

thx Joachim. I download that scene file and loaded it into the dvx200.

I read something about the DVX200 must be also in the natural color profile?

in the menu I have found other function/color tone/natural. Is this what they mean?

I also set the GH5S on the natural scene file.

I did a quick test and they match good "on first sight". Will do another test If I have more time

I tried to match both with natural setting on the GH5S and the GH4 still like scene file on the DVX200. Both with tungsten preset. The DVX200 has too much yellow. I don't see this with other scene files so I guess it is the GH4 still like scene file.

In the color correction setting in the menu you can change yellow color and phase but I have no experience how to change this. I guess I will screw this up.

So how can I best lower the yellow tint to match them perfectly?

Front view is the DVX200 (more orange) because of the yellow tint I guess (too much yellow in red = orange)

nobody experience with matching these cams?

Next month I have a shoot again but I have forgot which my 6 scene files are.
I thought my scene 4 file was the "GH4 still like scene file" to match my GH5S.

How can I know which scene files I have in my DVX200? They don't have a name like cinelike D or GH4 still like scene...

Hi Tom,
I looked through my Pamnasonic stuff and found the following scene-files which I have used as long as I had the DVX200.

I add a zip-file with those files and some descriptions.

Joachim

thx Joachim! I downloaded the ZIP file.
Probably this was the package I had downloaded also so scene 4 would be "GH4 natural"

I opened the .TXT files to see which settings/parameters they used to create this specific scene file but
SCENE:4
0002:+0
0003:+1

and so on I don't know how to check these settings in the camcorder itself like master ped, gamma mode, ...

If I know the default settings for "GH4 natural" and cinelike D (will overwritten this one also with that package)
I can verify them and write down those settings on a paper or type them in a text file or something.

I think this will the solution I'm looking for.