how are you mounting your wireless receiver to the camera? looking for a bracket for this, my lectro doesnt have a shoemount on it

So, we might need to know what model of receiver you're trying to mount to what model of camera here.
LR? SR? UCR?

Otherwise we can only really recommend gaff tape, velcro, or zip ties as the only truly universal solution.

Lectrosonics does sell shoe mount / 1/4"-20 threaded brackets application specific for their models.
There are also generic ones (such as bracket1.com (https://bracket1.com)) that are a metal back with a wrap around velcro that should fit most 'pack' style receivers.

I mount my AVX receiver in the XLR jack :-)

Once I had to run an old Sennheizer thing...i plugged it in the XLR and clipped the wire belt clip to the back of the shotgun cable. :-D

Paul

I mount my AVX receiver in the XLR jack :-)


Have you had issues trying to power it at the same time (over USB) while the receiver is on? I found I could only get clean audio with the receiver running on its internal battery.

Mini ball-head cold-shoe mount plus a spring-loaded cellphone tripod mounting bracket. Works like a charm on my Sony receiver on an FS5

http://a.co/2W4GrTK
http://a.co/7TEoR3z

i have the lectro ucr 100

So if you're trying to mount the UCR100 on a small camera with a hot shoe, you could try something like:

K-Tek K-SPT Shoe Plate Mount
Just add velcro to your RX and the plate
https://www.bhphotovideo.com/c/product/687517-REG/K_Tek_K_SPT_K_SPT_Shoe_Plate_Mount.html/BI/2855/KBID/3801

Rycote Wireless Universal Receiver Camera Bracket MkII
A couple velcro straps and a mount that
https://www.bhphotovideo.com/c/product/1006331-REG/rycote_157406_wireless_receiver_camera_bracket_universal.html/BI/2855/KBID/3801

I've worked with both of those; they're fine. There are other similar options. You can find them through the links above (not endorsing B&H, but an easy way to see what various vendors are offering).

I got this https://www.bhphotovideo.com/c/product/1197471-REG/dm_accessories_wamx00_wrap_around_mount.html/BI/2855/KBID/3801

its great!

oh it may not work with the 80s and 90s sorry

I tested the AVX on my old X180 that had a full size always powered USB-A port, and never heard any interference...the red charge light stayed on confirming it was charging while in use.

Paul

Does that go high enough to fit my lectrosonics in it
And is it staying pretty solid of would I need to Velcro