Walter Brokx
June 5th, 2016, 09:30 AM
Today a friend came by, as he had some time left with a rented FS5, so we could do a test run in a MoVI M5.
To be able to fly in the cage, we stripped the camera, so we only had the body and the lens.
I connected an external monitor through HDMI, but found a few strange things or we overlooked some things:
we could get zebra and peaking from the camera to the screen, but we couldn't get more info on the monitor than the timecode.
This means we were unable to see camerasettings and unable to navigate through the menu.
Did we overlook something in the little time we had for our test?
Another thing that seemed a bit weird it that we could control iris, zoom and rec through the app, but not the variable ND. That doesn't have to be a problem, but manually it seemed not to respond to the dial either. (With the corrrect settings on the body.)
This was just a short test, so we could have overlooked some things.
Actually, I hope we overlooked them, otherwise there are quite some bottlenecks to fly the FS5 properly on a gimbal.
(The cable of the FS5 monitor is too short and too thick to be usable in a gimbal configuration)
Any experiences and insights are welcome :-)
To be able to fly in the cage, we stripped the camera, so we only had the body and the lens.
I connected an external monitor through HDMI, but found a few strange things or we overlooked some things:
we could get zebra and peaking from the camera to the screen, but we couldn't get more info on the monitor than the timecode.
This means we were unable to see camerasettings and unable to navigate through the menu.
Did we overlook something in the little time we had for our test?
Another thing that seemed a bit weird it that we could control iris, zoom and rec through the app, but not the variable ND. That doesn't have to be a problem, but manually it seemed not to respond to the dial either. (With the corrrect settings on the body.)
This was just a short test, so we could have overlooked some things.
Actually, I hope we overlooked them, otherwise there are quite some bottlenecks to fly the FS5 properly on a gimbal.
(The cable of the FS5 monitor is too short and too thick to be usable in a gimbal configuration)
Any experiences and insights are welcome :-)