Martin Staron
May 4th, 2015, 03:30 PM
I would like you to inform you about a serious issue which happened with my X70:
Here goes:
I was recording a wedding simultaneously at both SDXC media cards. The cards of course meet the spec (SANDISK EXTREME UHS-I, U3). I recorded into XAVC-L, 50Mbpps, 1080p50, MXF wrapper. After about 40 minutes long shoot I hit the rec start /stop button to stop the recording, both record/standby indicators in the viewfinder started flashing until the battery died. I swapped the new battery pack and power it on, the camcorder gave me an option to recover corrupted video MXF files (not the file structure recovery option which can be found in menu). I did that, but after successful recovery I found out, that the entire take was gone on both cards.
Camera can't playback the video. The data is still in there, but since there's no correct metadata (MXF header, footer, etc), no one is not able to playback the video in the ordinary way.
I tried to recover it by a couple recovery tools, without any success. When I looked at the raw data sectors on the card (I used to do a file recovery for a living), I see some MXF structure without footer. But I don’t have idea how to create/recover correct MXF footer so far. The MXF is obviously not correct because of power loss.
I read about couple of an other guys have run into the exact same problem ( First gig with Sony PXW-X70, camera froze up and and would not record or turn off. (http://www.dvxuser.com/V6/showthread.php?334395-First-gig-with-Sony-PXW-X70-camera-froze-up-and-and-would-not-record-or-turn-off) ).
So it seems to be a firmware related issue. If you guys have any thoughts how to recover the video I will appreciated!
Thanks a lot in advance.
Here goes:
I was recording a wedding simultaneously at both SDXC media cards. The cards of course meet the spec (SANDISK EXTREME UHS-I, U3). I recorded into XAVC-L, 50Mbpps, 1080p50, MXF wrapper. After about 40 minutes long shoot I hit the rec start /stop button to stop the recording, both record/standby indicators in the viewfinder started flashing until the battery died. I swapped the new battery pack and power it on, the camcorder gave me an option to recover corrupted video MXF files (not the file structure recovery option which can be found in menu). I did that, but after successful recovery I found out, that the entire take was gone on both cards.
Camera can't playback the video. The data is still in there, but since there's no correct metadata (MXF header, footer, etc), no one is not able to playback the video in the ordinary way.
I tried to recover it by a couple recovery tools, without any success. When I looked at the raw data sectors on the card (I used to do a file recovery for a living), I see some MXF structure without footer. But I don’t have idea how to create/recover correct MXF footer so far. The MXF is obviously not correct because of power loss.
I read about couple of an other guys have run into the exact same problem ( First gig with Sony PXW-X70, camera froze up and and would not record or turn off. (http://www.dvxuser.com/V6/showthread.php?334395-First-gig-with-Sony-PXW-X70-camera-froze-up-and-and-would-not-record-or-turn-off) ).
So it seems to be a firmware related issue. If you guys have any thoughts how to recover the video I will appreciated!
Thanks a lot in advance.