View Full Version : From Cine EI to Custom Mode


Geert Geerits
February 8th, 2015, 07:34 AM
Shooting in Cine EI, Color Space S-Gamut3.Cine/Slog3, XAVC-I 3840x2160 25P

When I set the Shooting Mode back to Custom the Color Space does not change, the Viewfinder stays on S-log3.
Even when I select another preset like High Saturation, nothing changes, it stays on S-log3.
When I reset the camera or load the previous settings from the SD Card then its OK again.

It this a bug or do I missing something?

Firmware: 1.10

Geert Geerits

Doug Jensen
February 9th, 2015, 06:21 AM
You're mixing up the concepts of Gamma and Color Space.

If you don't want to use S-LOG3 when you come out of Cine EI, then you have to change the Gamma setting in the paint menus to something else. It sounds like you are changing the matrix settings and expecting those to also change the gamma. It doesn't work that way in the Custom Shooting mode.

Doug Jensen's Sony PXW-FS7 Master Class (http://www.vortexmedia.com/DVD_FS7.html)


Doug

Geert Geerits
February 9th, 2015, 09:54 AM
Thanks Doug, this was the solution.

Geert Geerits