Mervyn Jack
October 19th, 2014, 07:31 AM
Hi all
I want to share my experiences in video recording a wedding yesterday, my first for 8 years. This was a free job for a couple that were not getting a video done as they couldn't afford it. I wanted to practice.
First a bit of history,
Back in the late 80's and early 90's I used to video a few weddings. Usually with a hired 3 tube camera and u-matic recorder. Great quality and I still look forward to digitising some of the originals and work some modern day technology on them.
But the last wedding I did was for a cousin 8 years ago using Canon DV and Sony Digital 8 camera's.
Not bad for the time but I struggled for a long time with getting hardware and software up to speed and my new job (and new wife) has kept me away from my old hobby until now.
Anyway, about 12 months I started getting up to speed with the latest camera's, technology and prices.
I still can't justify a new camera yet, but it will be a video camera, not a video capable DSLR.
So for this wedding I decided my 2 year old domestic Sony video camera would have to do and audio was more important. So I invested in some audio gear, lapel mics, Zoom H1 and light stands and a light.
I borrowed a second video camera (with operator for the ceremony) and 2 GoPro's.
So Here's a list of what I had at my disposal, and some notes.
Sony HDR-XR260VE camera. This is mine. It's a bit noisy in low light but love the wide angle 35mm eqiv. 26.8mm to 321mm). The sound from it is amazing too.
Sony HDR-XR500E camera. Borrowed. Excellent image quality, much better in low light. A lot more complicated settings and I wasnt used to it as I used it at the reception. But I was not impressed by the wide angle. (35mm equiv. 43 to 516mm)
2 x borrowed GoPro's front side and rear of the ceremony and each side of the angled bridal table one grabbing the bridal table, dance floor and seated people. The other similar form the other side.
For the outdoor ceremony, fantasic, but not so good in the evening inside under lights. I think I'd prefer a couple of $300 video camera's.
1 x WF or Fancier FT-717 tripod Fancier FT-717 1.66m Heavy Duty Video Camera Tripod Kit w/ Fluid Head 3/8 Screw Mount Panhead" (http://www.protog.com.au/buy/fancier-ft-717-1.66m-heavy-duty-video-camera-tripo/FT6717KIT) . It was really good value and perfect for my small camera. I dod notice it quite stiff in the cool morning.
1 x $70 Sony video tripod. OK for holding a camera and swinging it around, but no fluid action.
2 x Rode Smartlav+ with TRRS to TRS adapter leads.
Zoom H1 with accessory pack. I was going to put this in the grooms pocket with a Smartlav+, but ended up using on a Microphone boom stand pointed toward the PA speaker at both locations.
I used one Smartlav+ into my Sony Xperia Z mobile phone running RecForge II which I had tested for hours during the preceeding days. I put that on the groom and inside jacket pocket. It worked fantastic for the ceremony.
2 x cheap eBay chinese light stands (2 for $24 delivered). Fantasic. 6ft tall, low footprint, lightweight. I added some small barbell weights for stability. If it was windy the gopro's might have wavered a bit outdoors, but it was OK.
1 x Yongnuo YN300 II video light. This one light on the cheap light stand covered the bridal table and dance floor and made quite a difference at about half brightness. Also used it on low in the brides house. Great light.
I also brought a sun sheild for the XR260 as it does not have a veiwfinder. It worked a treat. Amazon.com : LCD Screen Sun Shield for DSLR Cameras and Camcorders compatible with Canon EOS Rebel T5i T4i T3i, Canon VIXIA FS100 FS200 HF10 HG20 HF100, Nikon D5200 D5100 + MagicFiber Microfiber Cleaning Cloth : Digital Camera Accessory Kits : Camera (http://www.amazon.com/gp/product/B004ECZJDS/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1)
Lessons learned.
Some GoPro batteries don't last long in the sun.
Late brides cause wasted batteries.
2 GoPros with 32GB memory cards. Both on about equal time, but one was FULL before the other. Both had the same settings.
My XR260 only had 2 small size batteries. I flattened one by the end of the ceremony and started to panic as I didnt have an external charger. However I was able to keep chargin it in the quiet times of the reception and never even had to use my second batteries.
My friends' XR500 had a huge after market battery on it and it went all day and night.
Must get bigger batteries and external charger.
Forgot to turn on the ZOOM H1 twice, as it was on a mic stand. It could have recorded all day, next time it will be checked and left on.
2 camera operators are better than one, but that's not always practical or affordable. Have at least 2 or 3 cameras through.
Smartlav+ on the groom, smart idea. Smartlav+ on the table in a noisy reception, not a smart idea, I need a shotgun mic.
Well that's it for the gear & the lessons. If you are still with me, sorry for the long post. If you have any questions or comments, feel free.
Merv
I want to share my experiences in video recording a wedding yesterday, my first for 8 years. This was a free job for a couple that were not getting a video done as they couldn't afford it. I wanted to practice.
First a bit of history,
Back in the late 80's and early 90's I used to video a few weddings. Usually with a hired 3 tube camera and u-matic recorder. Great quality and I still look forward to digitising some of the originals and work some modern day technology on them.
But the last wedding I did was for a cousin 8 years ago using Canon DV and Sony Digital 8 camera's.
Not bad for the time but I struggled for a long time with getting hardware and software up to speed and my new job (and new wife) has kept me away from my old hobby until now.
Anyway, about 12 months I started getting up to speed with the latest camera's, technology and prices.
I still can't justify a new camera yet, but it will be a video camera, not a video capable DSLR.
So for this wedding I decided my 2 year old domestic Sony video camera would have to do and audio was more important. So I invested in some audio gear, lapel mics, Zoom H1 and light stands and a light.
I borrowed a second video camera (with operator for the ceremony) and 2 GoPro's.
So Here's a list of what I had at my disposal, and some notes.
Sony HDR-XR260VE camera. This is mine. It's a bit noisy in low light but love the wide angle 35mm eqiv. 26.8mm to 321mm). The sound from it is amazing too.
Sony HDR-XR500E camera. Borrowed. Excellent image quality, much better in low light. A lot more complicated settings and I wasnt used to it as I used it at the reception. But I was not impressed by the wide angle. (35mm equiv. 43 to 516mm)
2 x borrowed GoPro's front side and rear of the ceremony and each side of the angled bridal table one grabbing the bridal table, dance floor and seated people. The other similar form the other side.
For the outdoor ceremony, fantasic, but not so good in the evening inside under lights. I think I'd prefer a couple of $300 video camera's.
1 x WF or Fancier FT-717 tripod Fancier FT-717 1.66m Heavy Duty Video Camera Tripod Kit w/ Fluid Head 3/8 Screw Mount Panhead" (http://www.protog.com.au/buy/fancier-ft-717-1.66m-heavy-duty-video-camera-tripo/FT6717KIT) . It was really good value and perfect for my small camera. I dod notice it quite stiff in the cool morning.
1 x $70 Sony video tripod. OK for holding a camera and swinging it around, but no fluid action.
2 x Rode Smartlav+ with TRRS to TRS adapter leads.
Zoom H1 with accessory pack. I was going to put this in the grooms pocket with a Smartlav+, but ended up using on a Microphone boom stand pointed toward the PA speaker at both locations.
I used one Smartlav+ into my Sony Xperia Z mobile phone running RecForge II which I had tested for hours during the preceeding days. I put that on the groom and inside jacket pocket. It worked fantastic for the ceremony.
2 x cheap eBay chinese light stands (2 for $24 delivered). Fantasic. 6ft tall, low footprint, lightweight. I added some small barbell weights for stability. If it was windy the gopro's might have wavered a bit outdoors, but it was OK.
1 x Yongnuo YN300 II video light. This one light on the cheap light stand covered the bridal table and dance floor and made quite a difference at about half brightness. Also used it on low in the brides house. Great light.
I also brought a sun sheild for the XR260 as it does not have a veiwfinder. It worked a treat. Amazon.com : LCD Screen Sun Shield for DSLR Cameras and Camcorders compatible with Canon EOS Rebel T5i T4i T3i, Canon VIXIA FS100 FS200 HF10 HG20 HF100, Nikon D5200 D5100 + MagicFiber Microfiber Cleaning Cloth : Digital Camera Accessory Kits : Camera (http://www.amazon.com/gp/product/B004ECZJDS/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1)
Lessons learned.
Some GoPro batteries don't last long in the sun.
Late brides cause wasted batteries.
2 GoPros with 32GB memory cards. Both on about equal time, but one was FULL before the other. Both had the same settings.
My XR260 only had 2 small size batteries. I flattened one by the end of the ceremony and started to panic as I didnt have an external charger. However I was able to keep chargin it in the quiet times of the reception and never even had to use my second batteries.
My friends' XR500 had a huge after market battery on it and it went all day and night.
Must get bigger batteries and external charger.
Forgot to turn on the ZOOM H1 twice, as it was on a mic stand. It could have recorded all day, next time it will be checked and left on.
2 camera operators are better than one, but that's not always practical or affordable. Have at least 2 or 3 cameras through.
Smartlav+ on the groom, smart idea. Smartlav+ on the table in a noisy reception, not a smart idea, I need a shotgun mic.
Well that's it for the gear & the lessons. If you are still with me, sorry for the long post. If you have any questions or comments, feel free.
Merv