Colin McDonald
July 30th, 2014, 10:39 AM
I have access to the above should anyone here require it. I do not propose to put it online, but can email it if required.
View Full Version : XH-A1/G1 PAL parts catalogue Colin McDonald July 30th, 2014, 10:39 AM I have access to the above should anyone here require it. I do not propose to put it online, but can email it if required. Peter Adler August 6th, 2014, 02:09 PM Hi there! I'd love to have a copy if you can mail it. Thanks! EDIT: Sorry, my camcorder is the XH-G1S, so the catalogue is probably nor relevant for me. But thanks for offering to share it :-) Andy Wason January 18th, 2015, 08:31 AM Hi Colin, wouldn't mind a copy please! Thanks, Andy Colin McDonald January 26th, 2015, 07:45 AM Sorry, sorry, sorry! I didn't see either of your posts until just now. I will try to PM you now, and if it doesn't work, I'll upload the catalogue somewhere and post the link. EDIT: You should both have received a PM by now. Here's the link anyway (I may take this down after you have downloaded your copy). https://www.dropbox.com/s/lf6kana5o5uuncp/XH-A1%20parts%20catalogue.pdf?dl=0 Peter Adler January 26th, 2015, 03:02 PM Thanks Colin! I downloaded a copy of the parts catalogue. Thanks for sharing! All the best, Peter Chris Hurd January 26th, 2015, 03:05 PM Much appreciated -- thanks Colin! Don Palomaki January 27th, 2015, 05:18 AM Great! Thanks. Andy Wason January 30th, 2015, 06:49 AM Just noticed your link, Thanks, Andy Andre Milliner January 31st, 2015, 02:04 AM Thank you very much for sharing, Colin ! Hoping not to have to use it... but an excellent documentation. Thanks again ! Mark Fry February 3rd, 2015, 09:08 AM Many thanks. Anything that helps to keep these old warhorses going is welcome Colin McDonald February 3rd, 2015, 04:39 PM I hope you are not referring to Chris and Don! :-) Don Palomaki February 4th, 2015, 06:40 AM Better an "old warhorse" than a dead horse! Dale Estes February 27th, 2015, 12:18 PM Hi Colin, If the catalog is still available, I'd like a copy also. I have to find the two tiny screws that hold the external mike holder to the handle. Thanks, Dale. EDIT: Read the first post and saying you weren't going to post it online, so I emailed you. After further reading I then saw the link. Thanks for your help. |