Andy Wilkinson
January 2nd, 2013, 12:49 PM
I have seen a reference to someone using a Hoodman Hoodloupe 3 with a 4 inch hood riser & sheath on a C100 LCD, with a simple modification (see H D Warrior, which I won't directly link to here).
I am suspicious that this would not allow full coverage of the 3.5 inch LCD, but if anyone owns this loupe it would be great if they could share the dimensions at the base of the device (I believe it is a 4:3 aspect opening from a brief perusal of the web and the Hoodman website, but did not see a detailed spec listed - may have missed it). Hoodman loupe page link below:
HoodLoupes-Hoodman Corporation (http://www.hoodmanusa.com/products.asp?dept=1017)
Also, I see they have two new 3.2 versions - again, anyone know the exact dimensions on the LCD openings?
I know Zacuto have their special Z Finder device for the C100 in their product pipeline - I linked to a video demo/promo on it a long while back. However, that still does not seem to be available and will no doubt cost a small fortune when it is.
EDIT: OK, after a bit more research I have now found a uk website which illustrates how the Hood Riser fits and shows how the Hoodloupe 3 can be used on 4 inch screens - so that at least clears that aspect up!
Looks like the EX Kit Pro would be the one to get for the C100, at £112.10 ex VAT then 5 mins with a scalpel to modify the mounting strap/sheath. Link to the canford uk site below:
HOODMAN HRS4 HOOD RISER Fits Hoodloupe 3.0 to 4 inch screens (http://www.canford.co.uk/Products/88-1702_HOODMAN-HRS4-HOOD-RISER-Fits-Hoodloupe-30-to-4-inch-screens)
I have found the C100 difficult to use outdoors in bright sunlight (none of that up here where I am at present in the Lake District!) since the poor EVF design, hard rubber eye cup and awkward access allows stray sunlight in. Hence why I am looking at potential solutions.
I have read that someone pulled off the C100 eye cup with relative ease (and got it back on!) so maybe a much better aftermarket eye cup will eventually appear.
I am suspicious that this would not allow full coverage of the 3.5 inch LCD, but if anyone owns this loupe it would be great if they could share the dimensions at the base of the device (I believe it is a 4:3 aspect opening from a brief perusal of the web and the Hoodman website, but did not see a detailed spec listed - may have missed it). Hoodman loupe page link below:
HoodLoupes-Hoodman Corporation (http://www.hoodmanusa.com/products.asp?dept=1017)
Also, I see they have two new 3.2 versions - again, anyone know the exact dimensions on the LCD openings?
I know Zacuto have their special Z Finder device for the C100 in their product pipeline - I linked to a video demo/promo on it a long while back. However, that still does not seem to be available and will no doubt cost a small fortune when it is.
EDIT: OK, after a bit more research I have now found a uk website which illustrates how the Hood Riser fits and shows how the Hoodloupe 3 can be used on 4 inch screens - so that at least clears that aspect up!
Looks like the EX Kit Pro would be the one to get for the C100, at £112.10 ex VAT then 5 mins with a scalpel to modify the mounting strap/sheath. Link to the canford uk site below:
HOODMAN HRS4 HOOD RISER Fits Hoodloupe 3.0 to 4 inch screens (http://www.canford.co.uk/Products/88-1702_HOODMAN-HRS4-HOOD-RISER-Fits-Hoodloupe-30-to-4-inch-screens)
I have found the C100 difficult to use outdoors in bright sunlight (none of that up here where I am at present in the Lake District!) since the poor EVF design, hard rubber eye cup and awkward access allows stray sunlight in. Hence why I am looking at potential solutions.
I have read that someone pulled off the C100 eye cup with relative ease (and got it back on!) so maybe a much better aftermarket eye cup will eventually appear.