Stelios Christofides
September 25th, 2012, 09:28 AM
I use the below Profile settings for my NX5.
PICTURE PROFILE SETTINGS
BLACK LEVEL: master -4, r 0, g 0, b 0
GAMMA: ITU709
BLACK GAMMA: range middle, level 0
KNEE: auto 95% middle
COLOR MODE: ITU709 MATRIX, level 8
COLOR LEVEL: +2
COLOR PHASE: 0
COLOR DEPTH: all 0's
DETAIL: level +7, manual - v/h balance 0, b/w balance type 4, black limit 3, white limit 7, crispening 7, hi light detail +2
SKIN TONE DETAIL: Off
But I notice the skin of persons is a bit reddish. What setting do I adjust to make the colour less reddish.
PICTURE PROFILE SETTINGS
BLACK LEVEL: master -4, r 0, g 0, b 0
GAMMA: ITU709
BLACK GAMMA: range middle, level 0
KNEE: auto 95% middle
COLOR MODE: ITU709 MATRIX, level 8
COLOR LEVEL: +2
COLOR PHASE: 0
COLOR DEPTH: all 0's
DETAIL: level +7, manual - v/h balance 0, b/w balance type 4, black limit 3, white limit 7, crispening 7, hi light detail +2
SKIN TONE DETAIL: Off
But I notice the skin of persons is a bit reddish. What setting do I adjust to make the colour less reddish.