Mike Kujbida
June 15th, 2012, 07:34 AM
I was getting ready to do a multi-cam shoot yesterday (2 HM-750s and an HM-700) via HD-SI into a Tricaster) and the output of the 700 wasn't there upon power-up.
I could see it in the viewfinder but there was no output.
This is the second time this has happened to me so fortunately I knew how to fix it but am wondering if this has happened to anyone else.
I have to go into the camera menu, select my output format and press "Set", even though this was done the previous day during setup and the camera worked flawlessly for the first two shows.
I looked on the JVC site for any firmware updates but the most recent one is a few years old.
I could see it in the viewfinder but there was no output.
This is the second time this has happened to me so fortunately I knew how to fix it but am wondering if this has happened to anyone else.
I have to go into the camera menu, select my output format and press "Set", even though this was done the previous day during setup and the camera worked flawlessly for the first two shows.
I looked on the JVC site for any firmware updates but the most recent one is a few years old.