Just like to share what we learned about using our Tascam HDP2 with the Panasonic HPX372.
We first used a rca to xlr cable with a BNC adaptor. The cable is short less than 1m.
That worked great.
We connected the TC output from the camera into the xlr timecode in on the Tascam.
The Tascam could see the timecode.
Here is what we did on the Tascam.
We pressed the Timecode button to confirm the Tascam was receiving timecode.
Set the Panansonic to Freerun.
Set the Tascam Timecode settings to LTC.
Set the correct framerate on the Tascam.
Jam Sync.