In a project that I have coming up soon I will need all 4 channels of the audio that is available on the 320.
The front audio input is a stereo input with a different XLR connector. Does anyone know if there is an
adapter that will allow two normal XLR connectors for two separate audio inputs? That would be channel 1and 2 and channel 3 and 4 are on the back of the camera under the battery mount.

Thanks

Ronnie Martin

I have a couple of PMW-350s which should be the same.
I made up the cable myself and has been working fine with mic level inputs.

• XLR5 pin 1 to both cable shields going to Left XLR3 Pin 1 and Right XLR3 Pin 1
• XLR5 pin 2 to Left XLR3 pin 2
• XLR5 pin 3 to Left XLR3 pin 3
• XLR5 pin 4 to Right XLR3 pin 2
• XLR5 pin 5 to Right XLR3 pin 3