Hi,

I have just got an NX5. The factory setting is set at 70. What's a good setting for this camera. I set my FX1 at +100 and it's been fine. Any recommendations would be great! Thanks!

Zebra of 70 is best for setting exposure on faces. Otherwise 100 should be good.

Zebras are just a guide, nothing more. If you've grown up with zebras at 100% (as I did too, on my TRV900) then I'd suggest you stick with that setting. The good thing about the 100% setting is that you know you're just on the limit, and that a third of a stop wider and all detail will be lost in that area.

tom.

I too came from an FX1 and have my NX5U zebra set at 100. I know that on white its OK, on faces or yellow it will be overexposed. I find the NX5U is set closer to being real than the FX1 that was way underexposing most of the time.

Ron Evans

OK Folks. Thank you for your help.

Shuf.. you already got ur NX5? wow... Can i duplicate ur NX5 software/driver CD

Can. Come to my office.

WeBlog Malaysiakini Contact Us (http://weblog.malaysiakini.com/?page_id=33)

But Tuesday ya because tomorrow will be a busy day for me.

:-)