Free ground shipping in the US

good luck with your sale!
i've been looking to pick one of these up, unfortunately, my car bit the dust so I'll have to wait a little while. Great camera for a great price!

Price Reduced $485

Having moved on to the EOS 5D Mk. III, the time has come to part ways with one of my two trusty EOS 7D cameras and find a good home for it. This camera has been cleaned and checked by Canon USA (documentation provided). It is in very good condition with only two minor cosmetic dings: there's a small nick on the bottom of the body, and a couple of scuff marks on the top display panel (see pics). The large LCD display on the back is flawless (see pic).

This camera has brand new primary guts, the main circuit board having been recently replaced by Canon USA (documentation provided). There are only 15,000 activations on the shutter (documentation provided), so it's barely a tenth of the way through the standard EOS 7D expected lifecycle of 150,000. Last year I had this camera modified by Canon USA to replace the program mode dial with the newer, better locking version as found on the EOS 60D.

The lens that came with this kit has never been used. I unboxed it one time to take a picture of it, shown here. It's not an L-series lens but it does have image stabilization. I already own one of these EF 28-135mm lenses and have had photographs taken with it published in a couple of mass-market coffee table books.

All of the original accessories are included and most of them are still unwrapped and have never been used. Even the manual is still shrink-wrapped. I'm throwing in an HDMI-to-Mini-HDMI cable, a third-party remote switch, and an assortment of Canon and DVi branded swag.

Canon EOS 7D (modified) w/ EF 28-135mm IS lens + grip, batts, extras

-- in original packaging w/ all accessories (most have never been unwrapped)
-- locking mode dial modification added by Canon USA
-- recent clean & check by Canon USA
-- main PCB assembly recently replaced as new
-- 15,000 shutter actuations (documented) (shutter life expectancy is 150,000)
-- EF 28-135mm f/3.5-5.6 IS USM lens is brand new and has never been used
-- newly available firmware v2.0 already installed
-- more info at Canon U.S.A. : EOS 7D Firmware Upgrade Comparison (http://www.usa.canon.com/cusa/consumer/standard_display/EOS7D_firmware_compare)

-- Abacus 6ft. HDMI to Mini-HDMI cable, new, unwrapped
-- 3rd-party JYC remote shutter trigger

Swag pack:
-- 2 x Canon trade show ID lanyards
-- 2 x assorted Canon-branded pens
-- DVi-branded pen w/ built-in flashlight
-- DVi-branded original LensPen mult-function lens cleaning tool
-- DVi-branded magnetic base bendy-light w/ laser pointer, in gift box

Price for this kit is $1200. Payment by PayPal or bank-issued cashier's check only. Ships free to a U.S. address.

More pics... because you can't have enough pics.

This 2006 model Canon XH A1 High Definition HDV video camcorder has been recently cleaned and checked by Canon Professional Services (documentation provided). The factory service center has also retro-fitted this camcorder with a brand new tape transport mechanism (documentation provided). There are zero hours on the new tape transport. I have done a couple of eject cycles to verify its operation. The camcorder is shipped in its original box, and includes all of the original accessories (most of which are unused and still in their original packaging; even the owner's manual is still shrink-wrapped).

The built-in stereo microphone on many heavily-used XH A1 camcorders often becomes overly loose and floppy from poor storage and handling. This one however still has just the right degree of up & down and rotational flex. That's because I've taken very good care of this camera!

This kit also includes a VariZoom VZ-Pro-L remote lens controller ($250 value), a new carrying / storage bag ($180 value), a travel charger and two high-capacity batteries (third-party, $90 value), ten new Canon Mini-DV cassettes with storage rack, one new Canon HDV Master Quality cassette, one new Canon head cleaning cassette, two FireWire cables, two extra SD cards to store your Custom Preset files library, an SD card reader in case you don't already have one, and a variety of Canon-branded swag to enhance the package, including a very nice and relatively rare Canon-branded zippered business portfolio with pen, paper pad and a variety of pockets. And there's much more! Here are the entire kit contents:

Canon XH A1 High Definition Camcorder, in original box, with all original accessories (most are new and unwrapped):
-- DC Coupler DC-920
-- Component VIdeo Cable DTC-1000
-- Stereo A/V Cable STV-250N
-- Wireless Controller WL-D5000
-- Shoulder Strap SS-1000
-- Battery Pack BP-950G
-- 16MB SD Card SD-16M
-- Compact Power Adapter CA-920 with AC Cable
-- 2-AA Size Batteries
-- Lens Cap
-- Lens Hood
-- Operator's Manual
-- Warranty Card

VariZoom Pro-L remote lens controller (new & unused)

Strut Cases DVT-3 Reporter camera bag, branded DV Info Net, w/ sling (new & unused)

2 x Canon 16MB SD memory cards with dual case, to store your extra Custom Preset files

10 x Canon DVM-E60 Mini-DV 60min. cassette tapes, each new in shrinkwrap, with Bryco DV tape storage rack
1 x Canon HDVM-E63PR Digital Master HDV 63min. cassette tape, new in clamshell box
1 x Canon DVM-CL Mini-DV head cleaning cassette, new in shrink-wrap

2 x third-party BP-970G Canon-compatible high-capacity batteries, new in shrinkwrap and plastic boxes
1 x third-party CG-900 Canon-compatible travel charger for BP-9xx series batteries, new in shrinkwrap, incl. AC wall plug and DC car charger

1 x 30" FireWire cable, 4-pin to 4-pin (camcorder to laptop, or other camcorder)
1 x 72" FireWire cable, 6-pin to 4-pin (camcorder to desktop computer)

Canon branded swag pack:
-- Canon zippered portfolio w/ pen and paper pad, pockets
-- Canon spiral-bound 4" x 8" notepad
-- Canon PowerShot mousepad w/ 4" x 6" photo insert
-- Canon EOS baseball cap (blue, adjustable size)
-- Canon Mini-DV T-shirt (white, size XL)
-- Canon Rebel EOS plastic carabiner multi-function timer / temp / clock
-- Canon DV stylish red snug-fit koozy w/ carabiner
-- ZGC & Canon DV branded bottle cap opener / keychain
-- Canon Digic Key-Klasp multi-key ring
-- Canon Video sunglasses visor keeper
-- Canon Video tape measure w/ built-in level
-- Canon VIXIA HD pen w/ laser, flashlight, batts., in gift box
-- 2 x Canon trade show ID lanyards (black, white)
-- 5 x assorted Canon-branded pens

DV Info Net swag pack:
-- DVi-branded pen w/ built-in flashlight
-- DVi-branded original LensPen mult-function lens cleaning tool
-- DVi-branded magnetic base bendy-light w/ laser pointer, in gift box
-- DVi-branded pen w/ laser pointer, flashlight, batts., in gift box

This is a well-appointed High Definition shooting package. It is an ideal solution for someone who is looking to move up to the world of shooting HD with a professional three-chip camcorder. All you need to add is a good pro video tripod and your choice of microphones.

This very well equipped XH A1 kit will be sent to you in two separate packages. One will contain the camcorder (and its standard included accessories) in its original box, in other words, the camcorder will be double-boxed for protection during shipping. The other package will contain the Strut Cases DVT-3 Reporter camera bag. Everything else in this kit, including the VariZoom controller, the tapes, the extra batteries and all the swag etc., will be tucked inside the camera bag. The Canon-branded portfolio will be included in the same box as this bag.

NOTE: Sorry but I will not break up this kit. Everything I've included goes well with the XH A1, and it's too much of a hassle to sell anything separately. If there's something in this kit that you don't need or want, consider giving it to a friend, or sell it yourself.

NOTE: This is available to U.S. residents ONLY. This kit consists of two fairly large boxes and unfortunately it is not at all practical to ship them to Canada (due to customs charges) or overseas (due to the extra shipping expense). Sorry but I will not answer requests to ship this kit outside of the United States.

Price is $1500 which includes shipping on both boxes. Payment by PayPal or bank-issued cashier's check only. Sorry, no wire transfers!

Pics of Strut Cases DVT-3 Reporter camera bag plus proof of service by CPS.

Just a quick bit of feedback for Paul

I bought the lens and remotes from Paul. We chatted by mail and phone a couple of times. I can say that the items arrived exactly as described, and extremely well packed.

Paul was a pleasure to deal with throughout. This is the first time I have bought an item of this value from outside the UK. He was understanding of my concerns, and very helpful with the shipping etc.

Totally recommended seller, buy with confidence of this Guy

cheers Paul

Stuart

Thank You Stuart, very nice of you to post your comments.

Would like to sell soon so reducing to $400 shipped The dolly and curved track have all been sold so I would like to get this sold.

Items below are still for sale at a reduced price.

Canon VIXIA HF S30 HD Camcorder = $500
Original box with disk, manuals, and cables, remote
Canon stock power adapter/charger
Canon BP-808 stock battery
Pearstone BP-827 high capacity battery
Raynox 0.66x HD Conversion Lens 37mm
B+W 58mm to 72mm step up ring
72mm lens cap
B+W 72mm MC UV
LowePro EX 120 holds camera and gear
EWA Marine Rain Cover VG-1L

Sony Sportspack Waterproof Housing SPK-HCE = $40

You pay insured shipping. I pay paypal at the above price

Price lowered to $1700 shipped in the states...make an offer.

Panasonic HMC-40 Camcorder. Nearly perfect condition. Used with 78 hours. Comes with all standard accessories that were included in the original box (battery, cables, etc).

The MSRP is $2050 but asking only $1200.

I am more then happy to sweeten the deal a little bit and let all of this go for $4,000. Im in the interest of changing my workflow sooner then later, just send me a pm or post here if you want any and all pictures, or some example video to get a good idea!

I´m selling a brand new Mitakon 35mm f0.95 e-mount (NEX) lens.
I´m asking for us$1000 shipped. Paypal only.

http://bimg1.mlstatic.com/35mm-f095-para-nex-e-mount_MLB-F-3384437614_112012.jpg

http://bimg2.mlstatic.com/35mm-f095-para-nex-e-mount_MLB-F-3384437640_112012.jpg

http://bimg1.mlstatic.com/35mm-f095-para-nex-e-mount_MLB-F-3384437702_112012.jpg

http://bimg2.mlstatic.com/35mm-f095-para-nex-e-mount_MLB-F-3384437732_112012.jpg

http://bimg2.mlstatic.com/35mm-f095-para-nex-e-mount_MLB-F-3384438584_112012.jpg

http://bimg1.mlstatic.com/35mm-f095-para-nex-e-mount_MLB-F-3384439755_112012.jpg

http://farm9.staticflickr.com/8502/8254196923_91ed69f14f_c.jpg

http://farm9.staticflickr.com/8492/8254196581_0009a95890_c.jpg

http://farm9.staticflickr.com/8072/8254196325_5a0b4f5c3b_c.jpg

http://farm9.staticflickr.com/8222/8254195913_653a6a7e78_c.jpg

http://farm9.staticflickr.com/8343/8254195211_9269b00f1e_c.jpg

http://farm9.staticflickr.com/8341/8255268176_0439a45c6c_c.jpg

You are right Matt, I stand corrected. I was not aware of the "Completed Listing" feature, very helpful.

At any rate, good luck Victor in selling your camera. I'm sure when you find the right price it will sell quickly!

Extra bulbs included: 2 - 500w bulbs for the tota light, one 500w and one 200w for either of the other lights.

Here are some photos:

Indeed, thanks to everyones input. I myself like to shop around and get the best deal. I am a big ebay purchaser myself! I find something I want, then go straight to ebay to price match. Heres the deal though, I would never purchase a video camera or the higher expensive items on there. none the less, the camera is still up for sale, if you have any questions or possible offers please PM, email, or text me. It's not really fair to jump on a sale post and claim you can find it cheaper elsewhere. What is the motive of your post? if you want to get it cheaper message me, don't flood this thread with a debate on price. thanks and happy new year everyone!:) also camera run time: OPERATION 49X10H, DRUM RUN 39X10H, TAPE RUN 19X10H, THREADING 47X10H

More things added:

RODE VideoMic - $100

Genus GMB/A 15mm Rod System - $90

Tilta T-03 Baseplate w/ 8" rods - $265

$2200 for this nice kit!

Open to offers, Message me, thanks

The camera is now sold. Thanks.

No longer available, I've part-exchanged it with a dealer instead.

Still available... sitting on the shelf in its box looking unloved, begging for a new home!

How about £200 + postage?

Like new condition, and includes the original box, manuals and accessories. I am also including a Manfrotto Adapter cable ($23.24 at B&H) that allows connection to cameras with an AV-R plug. Asking $200, includes free continental USA shipping.


From the manufacturer: The Manfrotto 521PROi is a camera controller designed specifically for the LANC protocol used by Sony and Canon camcorders. The unit can control many critical functions remotely, including power, zoom speed, record, and focus. The 521PROi comes equipped with the 522SCA 10" (25 cm) coiled cable which can extend up to 20" (50 cm.)The 521PRO enables you to control power, recording, zoom and focus. It also has a progressive zoom speed (the further you rotate the zoom wheel, the faster the zoom), a fixed zoom speed (irrespective of the rotation applied to the wheel, zoom speed remains constant), or a customizable maximum speed, which you can set to exactly the level you want. To set a "custom"zoom speed, simply hold the zoom speed button until the LED flashes and use the wheel to record your speed. The LED shows you which speed you have selected.

One more: 20mm Lumix G Prime Lens for M4/3 with the box and everything! - $300

Glidetrack HD + 38" igus rail for sale. GT has been used maybe 5 times. $300 + shipping. Tripod head NOT included

$2150 anyone want a nice 7d kit?

email sent re: Genus GMB/A 15mm Rod System

SB

Jim,

A couple of questions. How tall is this tripod with all leg sections extended but without the central column?

How would you rate the pan/tilt smoothness (for video) compared to say a Manfrotto 503 head?

Thanks,

Hi Ervin,

- It is 5 feet from the floor to the top of the head/camera plate with all leg sections extended but without the central column.

-I have a Manfrotto 501 head, and I think that it is comparable to that in terms of pan/tilt smoothness. There are no pan/tilt drag adjustments on the 3063 like on the 501, just pan/tilt locks. I would say that the pan tilt smoothness is comparable to a midpoint pan/tilt drag setting on the 501, which for me is perfect. But If you prefer adjustable pan/tilt drag, then you need to look at a more expensive head.

I have used this setup for years as both a backup and as a main tripod/head setup, with everything from full sized shoulder mount to compact handycams, and it has served me well. Hope this helps.

Jim

Open to offers.

Chris, would you piece out what you have there? Maybe list what you'd charge? I don't need another omni but I might take the tota...

If you've only used the hard-case Lowel kits, you'll really like the soft-case, at least I did. So much nicer for typical use in and out of cars and rooms...

If you do part it out, I have spare Totas and would love another Omni and Pro.

Hi guys
Looking for a vision blue head....cash waiting.
Mat

I'd like to buy the Vortex DVD from you.

Selling a brand spanking new Letus Mattebox. Never got used and just selling off before it sits around any longer. This is the standard kit exactly as shown here:

http://www.letusdirect.com/cart/letu...ndard-kit.html

I'm also including the 80mm lens clamp (also brand new) that is an extra $199. The clamp can be seen here:

http://www.letusdirect.com/cart/letu...ens-clamp.html

Retail on this kit is $1,098.00. Asking $875 shipped to anywhere in the USA.

Great condition. Just $600. Credit cards accepted.

Audio-Technica ATW-1821C - Dual Wireless Microphone ATW-1821C


Two completely independent receiver channels in a single unit, for simultaneous operation of two microphones (dual-channel systems)

Compact receiver is easy to mount on a camera

UHF reception with 996 frequencies selectable in 25 kHz steps

Automatic frequency scanning for easy selection of open channels

Tone Lock squelch system eliminates interference when transmitter is off

Two independent balanced outputs (dual-channel systems)

Headphone monitor output with independent level control

Battery fuel-level indicators on transmitters and receiver

Soft-touch controls for easy frequency selection

True Diversity operation for resistance to multi-path interference and dropouts

LCD frequency and battery status display with backlight

Antenna and AF Peak LED indicators

Dual-channel receiver can operate in single-receiver mode to extend battery life when only one audio channel is in use (dual-channel systems)

Transmitters operate in low or high transmission modes to conserve battery life/maximize power

Easy, user-friendly operation

Clear, natural sound quality

Powered by AA batteries

PM on the way.

Thank you,

Price dropped to $275.

Thanks guys, but I'm just going to offer it as a set.

bump........

I have some extra pieces of equipment I am trying to get rid of at the moment. Currently it is located in Montreal but will meet up around the area and will ship CONUS no problem.

Its a Steadicam Merlin v1 - used but basically brand new. No big scratches, scuffs, anything. If you want more detailed photos just post here and Ill post pics up asap. It genuinely is in really good condition.

New the v2s go for $799 on BHPhoto, but this is used, and a v1, so $350?

http://farm9.staticflickr.com/8496/8345635487_d72990564e_b.jpg

PSC DV PROMIX 3 field audio mixer in excellent condition for sale. $320 by PayPal with shipping included in CONUS. This mixer currently sells for around $470 new.
Includes factory shoulder bag with openings for all controls and connectors. Runs on two 9-volt batteries. Mine also includes an AC to 12-volt DC power adapter that originally came from an obsolete Sharp LCD Panel, but runs this mixer perfectly using the external 12VDC jack on the mixer.

DV Promix 3 (http://www.professionalsound.com/specs/dv_3.htm) for a full explanation.

Thanks for looking!

$2000 is a good deal, anyone want a nice 7D kit?

I realize this was posted back in 2011, but was wondering if you have any of the items left for sale ... specifically the power adapter and coupler?

Hello -

I realize this was posted back in 2011, but was wondering .... would you still have the power adapter and coupler available for sale?

Hello -

I realize this was posted back in 2011, but was wondering .... would you still have the power adapter and coupler available for sale?

Hey Andrew, no I don't. I had forgotten I posted these here!